Different switch port layouts on "Ports" tab

Started by Tatjana Dubrovica, January 09, 2017, 04:00:12 PM

Previous topic - Next topic

Tatjana Dubrovica

We have implemented option to have different switch port layouts on "Ports" tab (non default like down-to-up, right-to-left). For now we have changed port layout only for HP A-series (former H3C) as we have one. If you know other SNMP devices that have non standard port layout configuration please share. Will be happy to set correct configuration for them.

lindeamon

hi,

i have cisco ews and dell power connect.

10x,
lindeamon

ArtKZ

Hi,

I have D'Link DGS-3612G, it's port numbering is single line from left to right.

hsvt

Quote from: Tatjana Dubrovica on January 09, 2017, 04:00:12 PM
We have implemented option to have different switch port layouts on "Ports" tab (non default like down-to-up, right-to-left). For now we have changed port layout only for HP A-series (former H3C) as we have one. If you know other SNMP devices that have non standard port layout configuration please share. Will be happy to set correct configuration for them.

D-Link DES3200-28C1, DGS-3120S\C, DES-3528, DGS-3000-10 and other.

Juniper MX series.

Victor Kirhenshtein

When reporting devices, please specify it's SNMP OID and actual port layout - that will save us lot of time looking for that information.

hsvt

Quote from: Victor Kirhenshtein on January 14, 2017, 11:13:30 AM
When reporting devices, please specify it's SNMP OID and actual port layout - that will save us lot of time looking for that information.

Please Provide an example of how it should look like and how do we show it here.

Victor Kirhenshtein

Switch OID - value of .1.3.6.1.2.1.1.2.0. For example, on my H3C switch:

victor@hp8570w ~ $ /opt/netxms/bin/nxsnmpget 10.5.4.1 .1.3.6.1.2.1.1.2.0
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.43.1.16.4.3.83

Port layout - just specify how many rows and how numbering goes. Same H3C example:
2 rows, numbering down-up then left-right:
2 4 6 8 ...
1 3 5 7 ...

Best regards,
Victor

hsvt

Quote from: Victor Kirhenshtein on January 16, 2017, 10:13:36 AM
Switch OID - value of .1.3.6.1.2.1.1.2.0. For example, on my H3C switch:

victor@hp8570w ~ $ /opt/netxms/bin/nxsnmpget 10.5.4.1 .1.3.6.1.2.1.1.2.0
.1.3.6.1.2.1.1.2.0 [OBJECT IDENTIFIER]: .1.3.6.1.4.1.43.1.16.4.3.83

Port layout - just specify how many rows and how numbering goes. Same H3C example:
2 rows, numbering down-up then left-right:
2 4 6 8 ...
1 3 5 7 ...

Best regards,
Victor

System Description=DES-3200-28/C1 Fast Ethernet Switch
SNMP Object ID=.1.3.6.1.4.1.171.10.113.5.1


joxta

I have two types of HP Switch:

HP A5120-48G EI Switch
.1.3.6.1.4.1.25506.11.1.34
2 rows, down-up, left-right:
2  4  6 ...
1  3  5 ...

HP A5800-24G Switch
.1.3.6.1.4.1.25506.11.1.16
2 rows, up-down, left-right:
1  3  5 ...
2  4  6 ...

Dani@M3T

CISCO SG200-26:
OID: .1.3.6.1.4.1.9.6.1.88.26.1
1 2 3 4 5 6 7 8 9 10 11 12                    25C 25F
13 14 15 16 17 18 19 20 21 22 23 24     26C 26F

CISCO SG250-26:
OID: .1.3.6.1.4.1.9.6.1.97.26.1
1 2 3 4 5 6 7 8 9 10 11 12                    25C 25F
13 14 15 16 17 18 19 20 21 22 23 24     26C 26F

ZyXEL GS2210-8
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8    10C 10F
1 3 5 7    9C   9F

ZyXEL GS1900-8
OID: .1.3.6.1.4.1.890.1.15
1 2 3 4 5 6 7 8

ZyXEL GS1900-24E
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10 12 14 16 18 20 22 24
1 3 5 7 9 11 13 15 17 19 21 23

ZyXEL GS1920-24
OID: .1.3.6.1.4.1.890.1.15
2 4 6 8 10 12 14 16 18 20 22 24     26C 28C 26F 28F
1 3 5 7 9 11 13 15 17 19 21 23       25C 27C 25F 27F

(Combo Ports are marked as 'C' for Copper and 'F' for Fiber)

lindeamon

fortigate 100d:
OID: .1.3.6.1.4.1.12356.101.1.1004