3 HP traps SNMP_HP_alarmInternal 100195 3 1 Internal Unit Alarm. Internal Unit Alarm. SNMP_HP_alarmSensorInternal 100194 3 1 Internal Sensor Alarm. Internal Sensor Alarm. SNMP_HP_alarmSensorWaterCoolUnit 100193 3 1 Water Cool Unit Sensor Alarm. Water Cool Unit Sensor Alarm. SNMP_HP_alarmWaterCoolUnit 100192 3 1 Water Cool Unit System Alarm. Water Cool Unit System Alarm. SNMP_HP_cppqRPMtrapUPSStartedOnBattery 100191 3 1 A UPS device has been started while on battery power. AC input power is not present. A UPS device has been started while on battery power. AC input power is not present. SNMP_HP_cpqCluster.cpqClusterTrap 100190 3 1 HP Cluster Trap. HP Cluster Trap. SNMP_HP_cpqCmcalarm1 100189 3 1 Alarm 1, set from Network management Alarm 1, set from Network management SNMP_HP_cpqCmcalarm2 100188 3 1 Alarm 2, set from Network management Alarm 2, set from Network management SNMP_HP_cpqCmcalarmAux1 100187 3 1 The rack auxiliary alarm input #1 has been triggered. The rack auxiliary alarm input #1 has been triggered. SNMP_HP_cpqCmcalarmAux2 100186 3 1 The rack auxiliary alarm input #2 has been triggered. The rack auxiliary alarm input #2 has been triggered. SNMP_HP_cpqCmcalarmFan1 100185 3 1 The status of Fan 1 has changed. Action: Refer to Trap Details for more information. The status of Fan 1 has changed. Action: Refer to Trap Details for more information. SNMP_HP_cpqCmcalarmFan2 100184 3 1 The status of Fan 2 has changed. Action: Refer to Trap Details for more information. The status of Fan 2 has changed. Action: Refer to Trap Details for more information. SNMP_HP_cpqCmcalarmHumidity 100183 3 1 The humidity of the rack is outside the specified threshold. The humidity of the rack is outside the specified threshold. SNMP_HP_cpqCmcalarmInput1 100182 3 1 The door or sidepanel of the rack has been opened (access point #1). The door or sidepanel of the rack has been opened (access point #1). SNMP_HP_cpqCmcalarmInput2 100181 3 1 The door or sidepanel of the rack has been opened (access point #2). The door or sidepanel of the rack has been opened (access point #2). SNMP_HP_cpqCmcalarmInput3 100180 3 1 The door or sidepanel of the rack has been opened (access point #3). The door or sidepanel of the rack has been opened (access point #3). SNMP_HP_cpqCmcalarmInput4 100179 3 1 The door or sidepanel of the rack has been opened (access point #4). The door or sidepanel of the rack has been opened (access point #4). SNMP_HP_cpqCmcalarmLock1 100178 3 1 Rack door lock #1 alarm. Rack door lock #1 alarm. SNMP_HP_cpqCmcalarmLock1Dev 100177 3 1 The rack door locking device #1 has failed. The rack door locking device #1 has failed. SNMP_HP_cpqCmcalarmLock2 100176 3 1 Rack door lock #2 alarm. Rack door lock #2 alarm. SNMP_HP_cpqCmcalarmLock2Dev 100175 3 1 The rack door locking device #2 has failed. The rack door locking device #2 has failed. SNMP_HP_cpqCmcalarmShock 100174 3 1 The rack shock detector has detected a vibration to the rack. The rack shock detector has detected a vibration to the rack. SNMP_HP_cpqCmcalarmSmoke 100173 3 1 The rack smoke detector has detected smoke. The rack smoke detector has detected smoke. SNMP_HP_cpqCmcalarmTemp1 100172 3 1 The temperature at rack sensor 1 is outside the specified threshold. The temperature at rack sensor 1 is outside the specified threshold. SNMP_HP_cpqCmcalarmTemp2 100171 3 1 The temperature at rack sensor 2 is outside the specified threshold. The temperature at rack sensor 2 is outside the specified threshold. SNMP_HP_cpqCmcalarmVoltage 100170 3 1 The AC voltage of the rack is outside the specified threshold. The AC voltage of the rack is outside the specified threshold. SNMP_HP_cpqCmcSetupChanged 100169 3 1 Setup of CMC has changed. Setup of CMC has changed. SNMP_HP_cpqCrController1FailureTrap 100168 3 1 The primary controller in the subsytem has failed. The primary controller in the subsytem has failed. SNMP_HP_cpqCrController2FailureTrap 100167 3 1 The secondary controller in the subsytem has failed. The secondary controller in the subsytem has failed. SNMP_HP_cpqCrDiskFailureTrap 100166 3 1 A disk drive has failed. A disk drive has failed. SNMP_HP_cpqCrEMUFanFailureTrap 100165 3 1 Fan has failed. Fan has failed. SNMP_HP_cpqCrEMUPowerSupplyFailureTrap 100164 3 1 Power supply has failed. Power supply has failed. SNMP_HP_cpqCrEMUTemperatureCriticalTrap 100163 3 1 Primary enclosure temperature critical!. Primary enclosure temperature critical!. SNMP_HP_cpqCrExpCabFanFailureTrap 100162 3 1 Fan has failed in expansion cabinet. Fan has failed in expansion cabinet. SNMP_HP_cpqCrExpCabPowerSupplyFailureTrap 100161 3 1 Power supply has failed. Power supply has failed. SNMP_HP_cpqCrExpCabTemperatureCriticalTrap 100160 3 1 Expansion cabinet temperature critical! Expansion cabinet temperature critical! SNMP_HP_cpqCrLogDriveFailureTrap 100159 3 1 A RAIDset has failed. A RAIDset has failed. SNMP_HP_cpqCrLogDriveReducedTrap 100158 3 1 A RAIDset has become degraded. A RAIDset has become degraded. SNMP_HP_cpqCrPhyDiskFailureTrap 100157 3 1 A disk drive has failed. A disk drive has failed. SNMP_HP_cpqDaAccelBadDataTrap 100156 3 1 Accelerator Board Bad Data. Accelerator Board Bad Data. SNMP_HP_cpqDaAccelBatteryFailed 100155 3 1 Accelerator Board Battery Failed. Accelerator Board Battery Failed. SNMP_HP_cpqDaPhyDrvThreshPassedTrap 100154 3 1 Physical Drive Threshold Passed. Physical Drive Threshold Passed. SNMP_HP_cpqHe3FltTolPowerRedundancyLost 100153 3 1 The Fault Tolerant Power Supplies have lost redundancy for the specified chassis. SNMP_HP_cpqHe3FltTolPowerRedundancyRestored 100152 0 1 The Fault Tolerant Power Supplies have returned to a redundant state for the specified chassis. SNMP_HP_cpqHe3FltTolPowerSupplyInserted 100151 0 1 A Fault Tolerant Power Supply has been inserted into the %2 chassis and bay location %3. SNMP_HP_cpqHe3FltTolPowerSupplyRemoved 100150 3 1 A Fault Tolerant Power Supply has been removed from the %2 chassis and bay location %3. SNMP_HP_cpqHe4FltTolPowerSupplyDegraded 100149 3 1 The fault tolerant power supply condition has been set to degraded for the %2 chassis and bay location %3. SNMP_HP_cpqHe4FltTolPowerSupplyOk 100148 0 1 The fault tolerant power supply condition has been set back to the OK state for the %2 chassis and bay location %3. SNMP_HP_cpqHe5CorrMemReplaceMemModule 100147 3 1 Corrected Memory Errors Detected. The errors have been corrected, but the memory module should be replaced. Corrected Memory Errors Detected The errors have been corrected, but the memory module should be replaced. Value 0 for CPU means memory is not Processor based SNMP_HP_cpqHeCorrectableMemoryError 100146 3 1 A correctable memory error occurred. A correctable memory error occurred. SNMP_HP_cpqHeResilientAdvancedECCMemoryEngaged 100145 3 1 Advanced Memory Protection Advanced ECC Memory Engaged. Replace the faulty memory. Advanced Memory Protection Advanced ECC Memory Engaged. The Advanced Memory Protection subsystem has detected a memory fault. Advanced ECC has been activated. User Action: Replace the faulty memory. SNMP_HP_cpqNic3ConnectivityLost 100144 1 1 Status of a logical adapter changes to the Failed condition. Nic number: %2 (if "1" then NIC number cannot be determined), System ID: %3 SNMP_HP_cpqNic3ConnectivityRestored 100143 0 1 Connectivity is restored to a logical adapter. Nic number: %2 (if "1" then NIC number cannot be determined), System ID: %3 SNMP_HP_cpqPMTrapCritical 100142 3 1 A critical alarm has occurred. %2 %3 %4 %5 %6 %7 A critical alarm has occurred. SNMP_HP_cpqRackEnclosureFanDegraded 100141 3 1 The enclosure fan status has been set to degraded. The enclosure fan status has been set to degraded. SNMP_HP_cpqRackEnclosureFanFailed 100140 3 1 The enclosure fan status has been set to failed. The enclosure fan status has been set to failed. SNMP_HP_cpqRackEnclosureFanRemoved 100139 3 1 The enclosure fan has been removed. The enclosure fan has been removed. SNMP_HP_cpqRackEnclosureManagerDegraded 100138 3 1 The Onboard Administrator or other management processor status has been set to degraded. The Onboard Administrator or other management processor status has been set to degraded. SNMP_HP_cpqRackEnclosureManagerRemoved 100137 3 1 The Onboard Administrator has been removed. The Onboard Administrator has been removed. SNMP_HP_cpqRackEnclosureRemoved 100136 3 1 The enclosure has been removed. The enclosure has been removed. SNMP_HP_cpqRackEnclosureTempDegraded 100135 3 1 The enclosure temperature status has been set to degraded. The enclosure temperature status has been set to degraded. SNMP_HP_cpqRackEnclosureTempFailed 100134 3 1 The enclosure temperature status has been set to failed. The enclosure temperature status has been set to failed. SNMP_HP_cpqRackFuseOpen 100133 3 1 The fuse has been tripped. The fuse has been tripped. SNMP_HP_cpqRackNetConnectorDegraded 100132 3 1 The interconnect status has been set to degraded. The interconnect status has been set to degraded. SNMP_HP_cpqRackNetConnectorFailed 100131 3 1 The interconnect status has been set to failed. The interconnect status has been set to failed. SNMP_HP_cpqRackPowerChassisAcFacilityPowerExceeded 100130 3 1 Power subsystem AC facility input power exceeded. Power subsystem AC facility input power exceeded. SNMP_HP_cpqRackPowerChassisConfigError 100129 3 1 Power subsystem improperly configured. Power subsystem improperly configured. SNMP_HP_cpqRackPowerChassisDcPowerProblem 100128 3 1 Power subsystem DC power problem. Power subsystem DC power problem. SNMP_HP_cpqRackPowerChassisLoadBalancingWireMissing 100127 3 1 Power subsystem load balancing wire missing. Power subsystem load balancing wire missing. SNMP_HP_cpqRackPowerChassisNotLoadBalanced 100126 3 1 Power subsystem not load balanced. Power subsystem not load balanced. SNMP_HP_cpqRackPowerChassisTooManyPowerChassis 100125 3 1 Power subsystem has too many power enclosures. Power subsystem has too many power enclosures. SNMP_HP_cpqRackPowerShedAutoShutdow 100124 3 1 Server shutdown due to power shedding. Server shutdown due to power shedding. SNMP_HP_cpqRackPowerSubsystemLineVoltageProblem 100123 3 1 The rack power supply detected an input line voltage problem. The rack power supply detected an input line voltage problem. SNMP_HP_cpqRackPowerSubsystemNotRedundant 100122 3 1 The rack power subsystem is no longer in a redundant state. The rack power subsystem is no longer in a redundant state. SNMP_HP_cpqRackPowerSubsystemOverloadCondition 100121 3 1 The rack power subsystem overload condition. The rack power subsystem overload condition. SNMP_HP_cpqRackPowerSupplyDegraded 100120 3 1 The power supply status has been set to degraded. The power supply status has been set to degraded. SNMP_HP_cpqRackPowerSupplyFailed 100119 3 1 The power supply status has been set to failed. The power supply status has been set to failed. SNMP_HP_cpqRackPowerSupplyRemoved 100118 3 1 The power supply has been removed. The power supply has been removed. SNMP_HP_cpqRackPowerUnknownPowerConsumption 100117 3 1 Unknown power consumption. Unknown power consumption. SNMP_HP_cpqRackServerBladeEKeyingFailed 100116 3 1 The server blade e-keying has failed. The server blade e-keying has failed. SNMP_HP_cpqRackServerBladeInserted2 100115 1 1 Server Blade inserted into rack %2 %2 Rack Name SNMP_HP_cpqRackServerBladeRemoved 100114 3 1 Server blade removed. Server blade removed. SNMP_HP_cpqRackServerBladeRemoved2 100113 3 1 Server blade removed. Server blade removed. SNMP_HP_cpqRackServerBladeStatusCritical 100112 3 1 Server blade health status Critical. Server blade health status Critical. SNMP_HP_cpqRackServerBladeStatusDegraded 100111 3 1 Server blade health status Degraded. Server blade health status Degraded. SNMP_HP_cpqRackServerBladeUnexpectedShutdown 100110 3 1 Server blade shutdown unexpectadly. Server blade shutdown unexpectadly. SNMP_HP_cpqRackServerPowerOnFailedEnclosureNotFound 100109 3 1 Inadequate power to power on. Inadequate power to power on. SNMP_HP_cpqRackServerPowerOnFailedNotEnoughPower 100108 3 1 Inadequate power to power on. Inadequate power to power on. SNMP_HP_cpqRackServerPowerOnFailedNotRedundant 100107 3 1 Server power on prevented to preserve redundancy. Server power on prevented to preserve redundancy. SNMP_HP_cpqRackServerPowerOnFailedPowerChassisNotFound 100106 3 1 Inadequate power to power on. Inadequate power to power on. SNMP_HP_cpqRackServerPowerOnManualOverride 100105 3 1 Server power on via manual override. Server power on via manual override. SNMP_HP_cpqRPMTrapCMCAux1Alarm 100104 3 1 A CMC device has entered an alarm condition for auxiliary input 2. A CMC device has entered an alarm condition for auxiliary input 2. SNMP_HP_cpqRPMTrapCMCHmdtOver 100103 3 1 A CMC device is reporting humidity above maximum threshold. A CMC device is reporting humidity above maximum threshold. SNMP_HP_cpqRPMTrapCMCHmdtUnder 100102 3 1 A CMC device is reporting humidity below minimum threshold. A CMC device is reporting humidity below minimum threshold. SNMP_HP_cpqRPMTrapCMCLockset1Error 100101 3 1 A CMC device is reporting an error with lockset 1. A CMC device is reporting an error with lockset 1. SNMP_HP_cpqRPMTrapCMCLockset1FailedToLock 100100 3 1 A CMC device is reporting lockset 1 has failed to lock. A CMC device is reporting lockset 1 has failed to lock. SNMP_HP_cpqRPMTrapCMCLockset2Error 100099 3 1 A CMC device is reporting an error with lockset 2. A CMC device is reporting an error with lockset 2. SNMP_HP_cpqRPMTrapCMCLockset2FailedToLock 100098 3 1 A CMC device is reporting lockset 2 has failed to lock. A CMC device is reporting lockset 2 has failed to lock. SNMP_HP_cpqRPMTrapCMCShockDetected 100097 3 1 A CMC device is reporting shock detected. A CMC device is reporting shock detected. SNMP_HP_cpqRPMTrapCMCSmokeDetected 100096 3 1 A CMC device is reporting smoke detected. A CMC device is reporting smoke detected. SNMP_HP_cpqRPMTrapCMCTemp1AboveMax 100095 3 1 A CMC device is reporting temperature 1 above maximum threshold. A CMC device is reporting temperature 1 above maximum threshold. SNMP_HP_cpqRPMTrapCMCTemp1BelowMin 100094 3 1 A CMC device is reporting temperature 1 below minimum threshold. A CMC device is reporting temperature 1 below minimum threshold. SNMP_HP_cpqRPMTrapCMCTemp2AboveMax 100093 3 1 A CMC device is reporting temperature 2 below minimum threshold. A CMC device is reporting temperature 2 below minimum threshold. SNMP_HP_cpqRPMTrapCMCTemp2BelowMin 100092 3 1 A CMC device is reporting temperature 1 below minimum threshold. A CMC device is reporting temperature 1 below minimum threshold. SNMP_HP_cpqRPMTrapCMCVoltOver 100091 3 1 A CMC device is reporting voltage above maximum threshold. A CMC device is reporting voltage above maximum threshold. SNMP_HP_cpqRPMTrapCMCVoltUnder 100090 3 1 A CMC device is reporting voltage below minimum threshold. A CMC device is reporting voltage below minimum threshold. SNMP_HP_cpqRPMTrapConnectionFailed 100089 3 1 CRPM failed to connect to a device. CRPM failed to connect to a device. SNMP_HP_cpqRPMTrapConnectionLost 100088 3 1 A UPS device is reporting a Connection Lost. A UPS device is reporting a Connection Lost. SNMP_HP_cpqRPMTrapUPSBatteriesDisconnected 100087 3 1 A UPS device is reporting batteries are not connected to the UPS. A UPS device is reporting batteries are not connected to the UPS. SNMP_HP_cpqRPMTrapUPSBatteryDepleted 100086 3 1 A UPS device is a depleted battery. A UPS device is a depleted battery. SNMP_HP_cpqRPMTrapUPSBatteryDischarged 100085 3 1 A UPS device is reporting batteries are completely discharged. A UPS device is reporting batteries are completely discharged. SNMP_HP_cpqRPMTrapUPSBatteryFailure 100084 3 1 A UPS device is reporting a battery failure. A UPS device is reporting a battery failure. SNMP_HP_cpqRPMTrapUPSBypassManualTurnedOff 100083 3 1 The bypass has been given a manual turn off command. The bypass has been given a manual turn off command. SNMP_HP_cpqRPMTrapUPSBypassNotAvailable 100082 3 1 A UPS device is reporting bypass not avaliable. A UPS device is reporting bypass not avaliable. SNMP_HP_cpqRPMTrapUPSCheckBreaker 100081 3 1 A UPS device is reporting an output Breaker or Relay has failed. A UPS device is reporting an output Breaker or Relay has failed. SNMP_HP_cpqRPMTrapUPSDCStartOccurred 100080 3 1 The UPS has been started on battery when AC input power is not present. The UPS has been started on battery when AC input power is not present. SNMP_HP_cpqRPMTrapUPSDiagnosticTestFailed 100079 3 1 A UPS device is reporting a diagnostic test failed. A UPS device is reporting a diagnostic test failed. SNMP_HP_cpqRPMTrapUPSEPOInitiated 100078 3 1 A UPS device is reporting an Emergency Power Off (EPO) command has been received to shutdown the UPS immediately with out delay. A UPS device is reporting an Emergency Power Off (EPO) command has been received to shutdown the UPS immediately with out delay. SNMP_HP_cpqRPMTrapUPSFanFailure 100077 3 1 A UPS device is reporting a fan failure has occurred. A UPS device is reporting a fan failure has occurred. SNMP_HP_cpqRPMtrapUPSInputOutofRange 100076 3 1 A UPS device is reporting input voltage is out of range. A UPS device is reporting input voltage is out of range. SNMP_HP_cpqRPMTrapUPSInputUnderOverFreq 100075 3 1 Input (Utility) fault: measured input frequency is outside of either the upper or lower frequency limit specification for normal operation. Input (Utility) fault: measured input frequency is outside of either the upper or lower frequency limit specification for normal operation. SNMP_HP_cpqRPMTrapUPSInputVoltageAboveMax 100074 3 1 A UPS device is reporting input voltage above maximum threshold. A UPS device is reporting input voltage above maximum threshold. SNMP_HP_cpqRPMTrapUPSInputVoltageBelowMin 100073 3 1 A UPS device is reporting input voltage below minimum threshold. A UPS device is reporting input voltage below minimum threshold. SNMP_HP_cpqRPMTrapUPSInternalFailure 100072 3 1 A UPS device is reporting a general UPS failure. A UPS device is reporting a general UPS failure. SNMP_HP_cpqRPMTrapUPSLossOfRedundancy 100071 3 1 A UPS device is reporting a loss of redundancy. A UPS device is reporting a loss of redundancy. SNMP_HP_cpqRPMTrapUPSManualLoadDumped 100070 3 1 The UPS has been powered off with user interaction. The UPS has been powered off with user interaction. SNMP_HP_cpqRPMTrapUPSOnBattery 100069 3 1 A UPS device is reporting on battery condition. A UPS device is reporting on battery condition. SNMP_HP_cpqRPMTrapUPSOnBoost 100068 3 1 A UPS device is reporting an On Boost condition due to the following. A UPS device is reporting an On Boost condition due to the following. SNMP_HP_cpqRPMTrapUPSOnBuck 100067 3 1 A UPS device is reporting an On Buck condition. A UPS device is reporting an On Buck condition. SNMP_HP_cpqRPMTrapUPSOnUtilityPower 100066 3 1 A UPS device is reporting on battery condition. A UPS device is reporting on battery condition. SNMP_HP_cpqRPMtrapUPSOutputoutofRange 100065 3 1 A UPS device is reporting output voltage is out of Range. A UPS device is reporting output voltage is out of Range. SNMP_HP_cpqRPMTrapUPSOutputOverload 100064 3 1 A UPS device is reporting an overload condition. A UPS device is reporting an overload condition. SNMP_HP_cpqRPMTrapUPSOutputVoltageAboveMax 100063 3 1 A UPS device is reporting output voltage above maximum threshold. A UPS device is reporting output voltage above maximum threshold. SNMP_HP_cpqRPMTrapUPSOutputVoltageBelowMin 100062 3 1 A UPS device is reporting output voltage below minimum threshold. A UPS device is reporting output voltage below minimum threshold. SNMP_HP_cpqRPMTrapUPSShutdownImminent 100061 3 1 A UPS device is reporting a shutdown imminent condition. A UPS device is reporting a shutdown imminent condition. SNMP_HP_cpqRPMTrapUPSShutdownPending 100060 3 1 A UPS device is reporting shutdown pending condition. A UPS device is reporting shutdown pending condition. SNMP_HP_cpqRPMTrapUPSSiteWiringFault 100059 3 1 A UPS device is reporting a fault in the input wiring. A UPS device is reporting a fault in the input wiring. SNMP_HP_cpqRPMTrapUPSTemperatureHigh 100058 3 1 A UPS device is reporting temperature above maximum threshold. A UPS device is reporting temperature above maximum threshold. SNMP_HP_cpqRPMTrapUPSTemperatureLow 100057 3 1 A UPS device is reporting temperature blow minimum threshold. A UPS device is reporting temperature blow minimum threshold. SNMP_HP_cpqRPMtrapUPSTemperatureOutOfRange 100056 3 1 A UPS device is reporting temperature is out of range. A UPS device is reporting temperature is out of range. SNMP_HP_cpqRPMTrapUPSUtilityFail 100055 3 1 Indicates that the utility input power is not within predetermined limits. Indicates that the utility input power is not within predetermined limits. SNMP_HP_cpqRPMTrapUPSUtilityNotPresent 100054 3 1 Indicates that the utility input is not present. Indicates that the utility input is not present. SNMP_HP_cpqSe2CpuThresholdPassed 100053 3 1 Internal CPU error threshold has been passed. Internal CPU error threshold has been passed. SNMP_HP_cpqSeCpuThresholdPassed 100052 3 1 Internal CPU error threshold has been passed. Internal CPU error threshold has been passed. SNMP_HP_cpqSePCCardThermalDegraded 100051 3 1 PC Card Slot Thermal Sensor threshold has been exceeded for safe operations thereby causing degraded operations. PC Card Slot Thermal Sensor threshold has been exceeded for safe operations thereby causing degraded operations. SNMP_HP_cpqSePCCardThermalFailure 100050 3 1 PC Card Slot Thermal Sensor threshold has been exceeded for degraded operations thereby causing failed operations. PC Card Slot Thermal Sensor threshold has been exceeded for degraded operations thereby causing failed operations. SNMP_HP_cpqSeUSBStorageDeviceAttached 100451 0 1 This trap is sent when a USB storage device has been attached. Device: %2, Type: %3 This trap is sent when a USB storage device has been attached SNMP_HP_cpqSeUSBStorageDeviceRemoved 100452 0 1 This trap is sent when a attached USB storage device is removed. Device: %2, Type: %3 This trap is sent when a attached USB storage device is removed SNMP_HP_cpqSiCorrMemErrStatusDegraded 100049 3 1 Correctable memory error count has exceeded the threshold. Correctable memory error count has exceeded the threshold. SNMP_HP_cpqSiHoodRemoved 100048 3 1 System hood is removed. System hood is removed. SNMP_HP_cpqSiHotPlugSlotPowerUpFailed 100047 3 1 Hot Plug Slot Board Failed Power-Up. Hot Plug Slot Board Failed Power-Up. SNMP_HP_cpqSiMonitorConditionDegraded 100046 3 1 The monitor's condition is degraded due to the internal temperature exceeding normal operating limits. The monitor's condition is degraded due to the internal temperature exceeding normal operating limits. SNMP_HP_cpqSiMonitorConditionFailed 100045 3 1 The monitor's condition has been set to failed due to an operational feature exceeding normal operating limits. The monitor's condition has been set to failed due to an operational feature exceeding normal operating limits. SNMP_HP_cpqSiSysBatteryCalibrationError 100044 3 1 The battery can not correctly indicate capacity. The battery can not correctly indicate capacity. SNMP_HP_cpqSiSysBatteryChargingDegraded 100043 3 1 The battery can no longer be fully recharged. The battery can no longer be fully recharged. SNMP_HP_cpqSiSysBatteryFailure 100042 3 1 The battery has failed. The battery has failed. SNMP_HP_cpqSm2BatteryDisconnected 100041 3 1 Remote Insight Battery Disconnected. Remote Insight Battery Disconnected. SNMP_HP_cpqSm2BatteryFailed 100040 3 1 The Remote Insight battery has failed and needs to be replaced. The Remote Insight battery has failed and needs to be replaced. SNMP_HP_cpqSm2InterfaceError 100039 3 1 The host OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. The host OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. SNMP_HP_cpqSm2LogsFull 100038 3 1 The Remote Insight/ Integrated Lights-Out firmware has detected the logs are full. The Remote Insight/ Integrated Lights-Out firmware has detected the logs are full. SNMP_HP_cpqSm2SelfTestError 100037 3 1 Remote Insight/ Integrated Lights-Out Self Test Error. Remote Insight/ Integrated Lights-Out Self Test Error. SNMP_HP_cpqSm2ServerFatalError 100036 3 1 Server Fatal Error Detected. Server Fatal Error Detected. SNMP_HP_cpqSm2ServerPowerOutage 100035 3 1 Server Power Outage. Server Power Outage. SNMP_HP_cpqSm2ServerReset 100034 3 1 Server Reset Detected. Server Reset Detected. SNMP_HP_cpqSm2UnauthorizedLoginAttempts 100033 3 1 Remote Insight/ Integrated Lights-Out Unauthorized Login Attempts. Remote Insight/ Integrated Lights-Out Unauthorized Login Attempts. SNMP_HP_cpqSs3PwrSupplyDegraded 100032 3 1 A storage system power supply status has been set to degraded. A storage system power supply status has been set to degraded. SNMP_HP_cpqSs3TempDegraded 100031 3 1 Storage System temperature degraded. Storage System temperature degraded. SNMP_HP_cpqSs3TempFailed 100030 3 1 Storage System temperature failure. Storage System temperature failure. SNMP_HP_cpqSs4PwrSupplyDegraded 100029 3 1 A storage system power supply status has been set to degraded. A storage system power supply status has been set to degraded. SNMP_HP_cpqSsFanStatusChange 100028 3 1 Storage System fan status change. Storage System fan status change. SNMP_HP_cpqSsPwrSupplyDegraded 100027 3 1 A storage system power supply status has been set to degraded. A storage system power supply status has been set to degraded. SNMP_HP_cpqSsTempDegraded 100026 3 1 Storage System temperature degraded. Storage System temperature degraded. SNMP_HP_cpqSsTempFailed 100025 3 1 Storage System temperature failure. Storage System temperature failure. SNMP_HP_cpqSwccEmuDevDeviceStatusChange 100024 3 1 EMU/Device Manager Device Status Change. EMU/Device Manager Device Status Change. SNMP_HP_cpqSwccFibreDeviceStatusChange 100023 3 1 FibreChannel Device Status Change. FibreChannel Device Status Change. SNMP_HP_cpqSwccTapeControllerStatusChange 100022 3 1 FibreChannel Device Status Change. FibreChannel Device Status Change. SNMP_HP_cpqTape3LibraryDegraded 100021 3 1 Tape Library Degraded. Tape Library Degraded. SNMP_HP_cpqTape3LibraryFailed 100020 3 1 Tape Library Error. Tape Library Error. SNMP_HP_cpqUps2BatteryLow 100019 3 1 UPS Battery Low. The server will soon lose power. UPS Battery Low. The server will soon lose power. SNMP_HP_cpqUps2LineFailed 100018 3 1 AC Line power failure. AC Line power failure. SNMP_HP_cpqUps2Shutdown 100017 3 1 UPS initiating graceful server shutdown. UPS initiating graceful server shutdown. SNMP_HP_cpqUpsBatteryLow 100016 3 1 UPS Battery Low. The server will soon lose power. UPS Battery Low. The server will soon lose power. SNMP_HP_cpqUpsGenericCritical 100015 3 1 Generic UPS critical alarm. Generic UPS critical alarm. SNMP_HP_cpqUpsLineFailed 100014 3 1 The UPS reports that the AC line power has failed. The UPS reports that the AC line power has failed. SNMP_HP_cpqUpsOverload 100013 3 1 The UPS has entered an overload condition. The UPS has entered an overload condition. SNMP_HP_cpqUpsPendingBatteryFailure 100012 3 1 The UPS battery is about to fail. Replace as soon as possible. The UPS battery is about to fail. Replace as soon as possible. SNMP_HP_cpqUpsShutdown 100011 3 1 UPS initiating graceful server shutdown. UPS initiating graceful server shutdown. SNMP_HP_emuEventTrapCritical 100010 3 1 An EMU Critical event has occurred An EMU Critical event has occurred SNMP_HP_emuEventTrapUnrecoverable 100009 3 1 An EMU Unrecoverable event has occurred An EMU Unrecoverable event has occurred SNMP_HP_fanfailed 100008 3 1 A fan failed. A fan failed. SNMP_HP_overheat 100007 3 1 On board tempature sensor has reported a overheat condition. On board tempature sensor has reported a overheat condition. SNMP_HP_powerSupplyFail 100006 3 1 One or more sources of power to this agent has failed. One or more sources of power to this agent has failed. SNMP_HP_rpsAlarm 100005 3 1 Attached Redundant Power Supply device is indicating an alarm condition. Attached Redundant Power Supply device is indicating an alarm condition. SNMP_HP_switchFanFailed 100004 3 1 The switch fan has failed. The switch fan has failed. SNMP_HP_switchTempSensorDegraded 100003 3 1 The switch temperature sensor indicates a high temperature condidtion. The switch temperature sensor indicates a high temperature condidtion. SNMP_HP_switchTempSensorFailed 100002 3 1 The switch temperature sensor indicates an over-temperature condition. The switch temperature sensor indicates an over-temperature condition. SNMP_HP_trapCritical 100001 3 1 A critical alarm has occurred. %2 %3 %4 %5 %6 %7 A critical alarm has occurred. SNMP_HP_trapDscCritical 100000 3 1 A critical alarm has occurred. %2 %3 %4 %5 %6 %7 A critical alarm has occurred. .1.3.6.1.4.1.232.154.2.0.10051 A CMC device has entered an alarm condition for auxiliary input 1. SNMP_HP_cpqRPMTrapCMCAux1Alarm .1.3.6.1.4.1.232.154.2.0.10053 A CMC device has entered an alarm condition for auxiliary input 2. SNMP_HP_cpqRPMTrapCMCAux1Alarm .1.3.6.1.4.1.232.154.2.0.10113 A CMC device is reporting an error with lockset 1. SNMP_HP_cpqRPMTrapCMCLockset1Error .1.3.6.1.4.1.232.154.2.0.10118 A CMC device is reporting an error with lockset 2. SNMP_HP_cpqRPMTrapCMCLockset2Error .1.3.6.1.4.1.232.154.2.0.10022 A CMC device is reporting humidity above maximum threshold. SNMP_HP_cpqRPMTrapCMCHmdtOver .1.3.6.1.4.1.232.154.2.0.10021 A CMC device is reporting humidity below minimum threshold. SNMP_HP_cpqRPMTrapCMCHmdtUnder .1.3.6.1.4.1.232.154.2.0.10112 A CMC device is reporting lockset 1 has failed to lock. SNMP_HP_cpqRPMTrapCMCLockset1FailedToLock .1.3.6.1.4.1.232.154.2.0.10117 A CMC device is reporting lockset 2 has failed to lock. SNMP_HP_cpqRPMTrapCMCLockset2FailedToLock .1.3.6.1.4.1.232.154.2.0.10041 A CMC device is reporting shock detected. SNMP_HP_cpqRPMTrapCMCShockDetected .1.3.6.1.4.1.232.154.2.0.10031 A CMC device is reporting smoke detected. SNMP_HP_cpqRPMTrapCMCSmokeDetected .1.3.6.1.4.1.232.154.2.0.10003 A CMC device is reporting temperature 1 above maximum threshold. SNMP_HP_cpqRPMTrapCMCTemp1AboveMax .1.3.6.1.4.1.232.154.2.0.10001 A CMC device is reporting temperature 1 below minimum threshold. SNMP_HP_cpqRPMTrapCMCTemp1BelowMin .1.3.6.1.4.1.232.154.2.0.10007 A CMC device is reporting temperature 2 above maximum threshold. SNMP_HP_cpqRPMTrapCMCTemp2AboveMax .1.3.6.1.4.1.232.154.2.0.10007 A CMC device is reporting temperature 2 below minimum threshold. SNMP_HP_cpqRPMTrapCMCTemp2AboveMax .1.3.6.1.4.1.232.154.2.0.10005 A CMC device is reporting temperature 2 below minimum threshold. SNMP_HP_cpqRPMTrapCMCTemp2BelowMin .1.3.6.1.4.1.232.154.2.0.10012 A CMC device is reporting voltage above maximum threshold. SNMP_HP_cpqRPMTrapCMCVoltOver .1.3.6.1.4.1.232.154.2.0.10011 A CMC device is reporting voltage below minimum threshold. SNMP_HP_cpqRPMTrapCMCVoltUnder .1.3.6.1.4.1.232.6.0.1 A correctable memory error occurred. SNMP_HP_cpqHeCorrectableMemoryError .1.3.6.1.4.1.232.154.3.0.1 A critical alarm has occurred. SNMP_HP_cpqPMTrapCritical .1.3.6.1.4.1.232.165.0.1 A critical alarm has occurred. SNMP_HP_trapCritical Variable1 1 Variable2 2 Variable3 3 Variable4 4 Variable5 5 Variable6 6 .1.3.6.1.4.1.232.171.0.2 A critical alarm has occurred. SNMP_HP_trapDscCritical Description .1.3.6.1.4.1.232.171.1.9 1 2 3 4 5 6 .1.3.6.1.4.1.232.141.3.5.0.11 A disk drive has failed. SNMP_HP_cpqCrDiskFailureTrap .1.3.6.1.4.1.232.141.3.5.0.31 A disk drive has failed. SNMP_HP_cpqCrPhyDiskFailureTrap .1.3.6.1.4.1.232.111.0.7 A fan failed. SNMP_HP_fanfailed .1.3.6.1.4.1.232.0.6033 A Fault Tolerant Power Supply has been inserted into the specified chassis and bay location. SNMP_HP_cpqHe3FltTolPowerSupplyInserted PSU chasis 3 PSU Bay 4 .1.3.6.1.4.1.232.0.6034 A Fault Tolerant Power Supply has been removed from the specified chassis and bay location. SNMP_HP_cpqHe3FltTolPowerSupplyRemoved PSU chassis 3 PSU bay 4 .1.3.6.1.4.1.232.141.3.3.0.8 A RAIDset has become degraded. SNMP_HP_cpqCrLogDriveReducedTrap .1.3.6.1.4.1.232.141.3.3.0.6 A RAIDset has failed. SNMP_HP_cpqCrLogDriveFailureTrap .1.3.6.1.4.1.232.0.8014 A storage system power supply status has been set to degraded. SNMP_HP_cpqSs3PwrSupplyDegraded .1.3.6.1.4.1.232.0.8015 A storage system power supply status has been set to degraded. SNMP_HP_cpqSs4PwrSupplyDegraded .1.3.6.1.4.1.232.0.8007 A storage system power supply status has been set to degraded. SNMP_HP_cpqSsPwrSupplyDegraded .1.3.6.1.4.1.232.154.2.0.20151 A UPS device has been started while on battery power. AC input power is not present. SNMP_HP_cppqRPMtrapUPSStartedOnBattery .1.3.6.1.4.1.232.154.2.0.20022 A UPS device is a depleted battery. SNMP_HP_cpqRPMTrapUPSBatteryDepleted .1.3.6.1.4.1.232.154.2.0.20201 A UPS device is reporting a fault in the input wiring. SNMP_HP_cpqRPMTrapUPSSiteWiringFault .1.3.6.1.4.1.232.154.2.0.20111 A UPS device is reporting a general UPS failure. SNMP_HP_cpqRPMTrapUPSInternalFailure .1.3.6.1.4.1.232.154.2.0.21053 A UPS device is reporting batteries are not connected to the UPS. SNMP_HP_cpqRPMTrapUPSBatteriesDisconnected .1.3.6.1.4.1.232.154.2.0.20121 A UPS device is reporting a battery failure. SNMP_HP_cpqRPMTrapUPSBatteryFailure .1.3.6.1.4.1.232.154.2.0.2 A UPS device is reporting a Connection Lost. SNMP_HP_cpqRPMTrapConnectionLost .1.3.6.1.4.1.232.154.2.0.20131 A UPS device is reporting a diagnostic test failed. SNMP_HP_cpqRPMTrapUPSDiagnosticTestFailed .1.3.6.1.4.1.232.154.2.0.21035 A UPS device is reporting a fan failure has occurred. SNMP_HP_cpqRPMTrapUPSFanFailure .1.3.6.1.4.1.232.154.2.0.21023 A UPS device is reporting a loss of redundancy. SNMP_HP_cpqRPMTrapUPSLossOfRedundancy .1.3.6.1.4.1.232.154.2.0.21013 A UPS device is reporting a shutdown imminent condition. SNMP_HP_cpqRPMTrapUPSShutdownImminent .1.3.6.1.4.1.232.154.2.0.21037 A UPS device is reporting an Emergency Power Off (EPO) command has been received to shutdown the UPS immediately with out delay. SNMP_HP_cpqRPMTrapUPSEPOInitiated .1.3.6.1.4.1.232.154.2.0.21031 A UPS device is reporting an On Boost condition due to the following. SNMP_HP_cpqRPMTrapUPSOnBoost .1.3.6.1.4.1.232.154.2.0.21029 A UPS device is reporting an On Buck condition. SNMP_HP_cpqRPMTrapUPSOnBuck .1.3.6.1.4.1.232.154.2.0.21041 A UPS device is reporting an output Breaker or Relay has failed. SNMP_HP_cpqRPMTrapUPSCheckBreaker .1.3.6.1.4.1.232.154.2.0.20014 A UPS device is reporting an overload condition. SNMP_HP_cpqRPMTrapUPSOutputOverload .1.3.6.1.4.1.232.154.2.0.21057 A UPS device is reporting batteries are completely discharged. SNMP_HP_cpqRPMTrapUPSBatteryDischarged .1.3.6.1.4.1.232.154.2.0.20161 A UPS device is reporting bypass not avaliable. SNMP_HP_cpqRPMTrapUPSBypassNotAvailable .1.3.6.1.4.1.232.154.2.0.20002 A UPS device is reporting input voltage above maximum threshold. SNMP_HP_cpqRPMTrapUPSInputVoltageAboveMax .1.3.6.1.4.1.232.154.2.0.20001 A UPS device is reporting input voltage below minimum threshold. SNMP_HP_cpqRPMTrapUPSInputVoltageBelowMin .1.3.6.1.4.1.232.154.2.0.21021 A UPS device is reporting input voltage is out of range. SNMP_HP_cpqRPMtrapUPSInputOutofRange .1.3.6.1.4.1.232.154.2.0.21063 A UPS device is reporting on battery condition. SNMP_HP_cpqRPMTrapUPSOnBattery .1.3.6.1.4.1.232.154.2.0.21064 A UPS device is reporting on battery condition. SNMP_HP_cpqRPMTrapUPSOnUtilityPower .1.3.6.1.4.1.232.154.2.0.20012 A UPS device is reporting output voltage above maximum threshold. SNMP_HP_cpqRPMTrapUPSOutputVoltageAboveMax .1.3.6.1.4.1.232.154.2.0.20011 A UPS device is reporting output voltage below minimum threshold. SNMP_HP_cpqRPMTrapUPSOutputVoltageBelowMin .1.3.6.1.4.1.232.154.2.0.21019 A UPS device is reporting output voltage is out of Range. SNMP_HP_cpqRPMtrapUPSOutputoutofRange .1.3.6.1.4.1.232.154.2.0.21011 A UPS device is reporting shutdown pending condition. SNMP_HP_cpqRPMTrapUPSShutdownPending .1.3.6.1.4.1.232.154.2.0.20102 A UPS device is reporting temperature above maximum threshold. SNMP_HP_cpqRPMTrapUPSTemperatureHigh .1.3.6.1.4.1.232.154.2.0.20101 A UPS device is reporting temperature blow minimum threshold. SNMP_HP_cpqRPMTrapUPSTemperatureLow .1.3.6.1.4.1.232.154.2.0.21007 A UPS device is reporting temperature is out of range. SNMP_HP_cpqRPMtrapUPSTemperatureOutOfRange .1.3.6.1.4.1.232.0.12006 AC Line power failure. SNMP_HP_cpqUps2LineFailed .1.3.6.1.4.1.232.3.0.6 Accelerator Board Bad Data. SNMP_HP_cpqDaAccelBadDataTrap .1.3.6.1.4.1.232.3.0.7 Accelerator Board Battery Failed. SNMP_HP_cpqDaAccelBatteryFailed .1.3.6.1.4.1.232.0.6052 Advanced Memory Protection Advanced ECC Memory Engaged. SNMP_HP_cpqHeResilientAdvancedECCMemoryEngaged .1.3.6.1.4.1.232.153.0.153017 Alarm 1, set from Network management SNMP_HP_cpqCmcalarm1 .1.3.6.1.4.1.232.153.0.153018 Alarm 2, set from Network management SNMP_HP_cpqCmcalarm2 .1.3.6.1.4.1.232.0.136003 An EMU Critical event has occurred SNMP_HP_emuEventTrapCritical .1.3.6.1.4.1.232.0.136004 An EMU Unrecoverable event has occurred SNMP_HP_emuEventTrapUnrecoverable .1.3.6.1.4.1.232.111.0.12 Attached Redundant Power Supply device is indicating an alarm condition. SNMP_HP_rpsAlarm .1.3.6.1.4.1.232.0.18011 Connectivity is restored to a logical adapter. SNMP_HP_cpqNic3ConnectivityRestored NIC port number 4 System ID 5 .1.3.6.1.4.1.232.0.2005 Correctable memory error count has exceeded the threshold. SNMP_HP_cpqSiCorrMemErrStatusDegraded .1.3.6.1.4.1.232.0.6064 Corrected Memory Errors Detected SNMP_HP_cpqHe5CorrMemReplaceMemModule .1.3.6.1.4.1.232.154.2.0.4 CRPM failed to connect to a device. SNMP_HP_cpqRPMTrapConnectionFailed .1.3.6.1.4.1.232.132.3.0.1 EMU/Device Manager Device Status Change. SNMP_HP_cpqSwccEmuDevDeviceStatusChange .1.3.6.1.4.1.232.141.3.8.0.27 Expansion cabinet temperature critical! SNMP_HP_cpqCrExpCabTemperatureCriticalTrap .1.3.6.1.4.1.232.141.3.8.0.20 Fan has failed in expansion cabinet. SNMP_HP_cpqCrExpCabFanFailureTrap .1.3.6.1.4.1.232.141.3.7.0.16 Fan has failed. SNMP_HP_cpqCrEMUFanFailureTrap .1.3.6.1.4.1.232.132.2.0.1 FibreChannel Device Status Change. SNMP_HP_cpqSwccFibreDeviceStatusChange .1.3.6.1.4.1.232.132.2.0.2 FibreChannel Device Status Change. SNMP_HP_cpqSwccTapeControllerStatusChange .1.3.6.1.4.1.232.0.12013 Generic UPS critical alarm. SNMP_HP_cpqUpsGenericCritical .1.3.6.1.4.1.232.0.2010 Hot Plug Slot Board Failed Power-Up. SNMP_HP_cpqSiHotPlugSlotPowerUpFailed .1.3.6.1.4.1.232.15.3 HP Cluster Trap. SNMP_HP_cpqCluster.cpqClusterTrap .1.3.6.1.4.1.232.0.22024 Inadequate power to power on. SNMP_HP_cpqRackServerPowerOnFailedEnclosureNotFound .1.3.6.1.4.1.232.0.22023 Inadequate power to power on. SNMP_HP_cpqRackServerPowerOnFailedNotEnoughPower .1.3.6.1.4.1.232.0.22025 Inadequate power to power on. SNMP_HP_cpqRackServerPowerOnFailedPowerChassisNotFound .1.3.6.1.4.1.232.154.2.0.20181 Indicates that the utility input is not present. SNMP_HP_cpqRPMTrapUPSUtilityNotPresent .1.3.6.1.4.1.232.154.2.0.20171 Indicates that the utility input power is not within predetermined limits. SNMP_HP_cpqRPMTrapUPSUtilityFail .1.3.6.1.4.1.232.154.2.0.20141 Input (Utility) fault: measured input frequency is outside of either the upper or lower frequency limit specification for normal operation. SNMP_HP_cpqRPMTrapUPSInputUnderOverFreq .1.3.6.1.4.1.232.0.1005 Internal CPU error threshold has been passed. SNMP_HP_cpqSe2CpuThresholdPassed .1.3.6.1.4.1.232.0.1001 Internal CPU error threshold has been passed. SNMP_HP_cpqSeCpuThresholdPassed .1.3.6.1.4.1.232.167.0.1 Internal Sensor Alarm. SNMP_HP_alarmSensorInternal .1.3.6.1.4.1.232.167.0.5 Internal Unit Alarm. SNMP_HP_alarmInternal .1.3.6.1.4.1.232.111.0.6 On board tempature sensor has reported a overheat condition. SNMP_HP_overheat .1.3.6.1.4.1.232.111.0.10 One or more sources of power to this agent has failed. SNMP_HP_powerSupplyFail .1.3.6.1.4.1.232.0.1003 PC Card Slot Thermal Sensor threshold has been exceeded for degraded operations thereby causing failed operations. SNMP_HP_cpqSePCCardThermalFailure .1.3.6.1.4.1.232.0.1002 PC Card Slot Thermal Sensor threshold has been exceeded for safe operations thereby causing degraded operations. SNMP_HP_cpqSePCCardThermalDegraded .1.3.6.1.4.1.232.3.0.4 Physical Drive Threshold Passed. SNMP_HP_cpqDaPhyDrvThreshPassedTrap .1.3.6.1.4.1.232.0.22032 Power subsystem AC facility input power exceeded. SNMP_HP_cpqRackPowerChassisAcFacilityPowerExceeded .1.3.6.1.4.1.232.0.22031 Power subsystem DC power problem. SNMP_HP_cpqRackPowerChassisDcPowerProblem .1.3.6.1.4.1.232.0.22035 Power subsystem has too many power enclosures. SNMP_HP_cpqRackPowerChassisTooManyPowerChassis .1.3.6.1.4.1.232.0.22036 Power subsystem improperly configured. SNMP_HP_cpqRackPowerChassisConfigError .1.3.6.1.4.1.232.0.22034 Power subsystem load balancing wire missing. SNMP_HP_cpqRackPowerChassisLoadBalancingWireMissing .1.3.6.1.4.1.232.0.22030 Power subsystem not load balanced. SNMP_HP_cpqRackPowerChassisNotLoadBalanced .1.3.6.1.4.1.232.141.3.7.0.18 Power supply has failed. SNMP_HP_cpqCrEMUPowerSupplyFailureTrap .1.3.6.1.4.1.232.141.3.8.0.22 Power supply has failed. SNMP_HP_cpqCrExpCabPowerSupplyFailureTrap .1.3.6.1.4.1.232.141.3.7.0.24 Primary enclosure temperature critical!. SNMP_HP_cpqCrEMUTemperatureCriticalTrap .1.3.6.1.4.1.232.153.0.153011 Rack door lock #1 alarm. SNMP_HP_cpqCmcalarmLock1 .1.3.6.1.4.1.232.153.0.153012 Rack door lock #2 alarm. SNMP_HP_cpqCmcalarmLock2 .1.3.6.1.4.1.232.0.9007 Remote Insight Battery Disconnected. SNMP_HP_cpqSm2BatteryDisconnected .1.3.6.1.4.1.232.0.9005 Remote Insight/ Integrated Lights-Out Self Test Error. SNMP_HP_cpqSm2SelfTestError .1.3.6.1.4.1.232.0.9003 Remote Insight/ Integrated Lights-Out Unauthorized Login Attempts. SNMP_HP_cpqSm2UnauthorizedLoginAttempts .1.3.6.1.4.1.232.0.22054 Server blade health status Critical. SNMP_HP_cpqRackServerBladeStatusCritical .1.3.6.1.4.1.232.0.22053 Server blade health status Degraded. SNMP_HP_cpqRackServerBladeStatusDegraded .1.3.6.1.4.1.232.0.22051 Server blade inserted. SNMP_HP_cpqRackServerBladeInserted2 RackName .1.3.6.1.4.1.232.22.2.2.1.1.2.1 .1.3.6.1.4.1.232.0.22028 Server blade removed. SNMP_HP_cpqRackServerBladeRemoved .1.3.6.1.4.1.232.0.22050 Server blade removed. SNMP_HP_cpqRackServerBladeRemoved2 .1.3.6.1.4.1.232.0.22056 Server blade shutdown unexpectadly. SNMP_HP_cpqRackServerBladeUnexpectedShutdown .1.3.6.1.4.1.232.0.9014 Server Fatal Error Detected. SNMP_HP_cpqSm2ServerFatalError .1.3.6.1.4.1.232.0.22022 Server power on prevented to preserve redundancy. SNMP_HP_cpqRackServerPowerOnFailedNotRedundant .1.3.6.1.4.1.232.0.22026 Server power on via manual override. SNMP_HP_cpqRackServerPowerOnManualOverride .1.3.6.1.4.1.232.0.9002 Server Power Outage. SNMP_HP_cpqSm2ServerPowerOutage .1.3.6.1.4.1.232.0.9001 Server Reset Detected. SNMP_HP_cpqSm2ServerReset .1.3.6.1.4.1.232.0.22021 Server shutdown due to power shedding. SNMP_HP_cpqRackPowerShedAutoShutdow .1.3.6.1.4.1.232.153.0.153100 Setup of CMC has changed. SNMP_HP_cpqCmcSetupChanged .1.3.6.1.4.1.232.0.18012 Status of a logical adapter changes to the Failed condition. SNMP_HP_cpqNic3ConnectivityLost NIC port number 4 System ID 5 .1.3.6.1.4.1.232.8.0.1 Storage System fan status change. SNMP_HP_cpqSsFanStatusChange .1.3.6.1.4.1.232.0.8010 Storage System temperature degraded. SNMP_HP_cpqSs3TempDegraded .1.3.6.1.4.1.232.0.8003 Storage System temperature degraded. SNMP_HP_cpqSsTempDegraded .1.3.6.1.4.1.232.0.8009 Storage System temperature failure. SNMP_HP_cpqSs3TempFailed .1.3.6.1.4.1.232.0.8002 Storage System temperature failure. SNMP_HP_cpqSsTempFailed .1.3.6.1.4.1.232.0.2001 System hood is removed. SNMP_HP_cpqSiHoodRemoved .1.3.6.1.4.1.232.0.5012 Tape Library Degraded. SNMP_HP_cpqTape3LibraryDegraded .1.3.6.1.4.1.232.0.5010 Tape Library Error. SNMP_HP_cpqTape3LibraryFailed .1.3.6.1.4.1.232.153.0.153005 The AC voltage of the rack is outside the specified threshold. SNMP_HP_cpqCmcalarmVoltage .1.3.6.1.4.1.232.0.2012 The battery can no longer be fully recharged. SNMP_HP_cpqSiSysBatteryChargingDegraded .1.3.6.1.4.1.232.0.2013 The battery can not correctly indicate capacity. SNMP_HP_cpqSiSysBatteryCalibrationError .1.3.6.1.4.1.232.0.2011 The battery has failed. SNMP_HP_cpqSiSysBatteryFailure .1.3.6.1.4.1.232.154.2.0.20192 The bypass has been given a manual turn off command. SNMP_HP_cpqRPMTrapUPSBypassManualTurnedOff .1.3.6.1.4.1.232.153.0.153007 The door or sidepanel of the rack has been opened (access point #1). SNMP_HP_cpqCmcalarmInput1 .1.3.6.1.4.1.232.153.0.153008 The door or sidepanel of the rack has been opened (access point #2). SNMP_HP_cpqCmcalarmInput2 .1.3.6.1.4.1.232.153.0.153009 The door or sidepanel of the rack has been opened (access point #3). SNMP_HP_cpqCmcalarmInput3 .1.3.6.1.4.1.232.153.0.153010 The door or sidepanel of the rack has been opened (access point #4). SNMP_HP_cpqCmcalarmInput4 .1.3.6.1.4.1.232.0.22011 The enclosure fan has been removed. SNMP_HP_cpqRackEnclosureFanRemoved .1.3.6.1.4.1.232.0.22009 The enclosure fan status has been set to degraded. SNMP_HP_cpqRackEnclosureFanDegraded .1.3.6.1.4.1.232.0.22008 The enclosure fan status has been set to failed. SNMP_HP_cpqRackEnclosureFanFailed .1.3.6.1.4.1.232.0.22003 The enclosure has been removed. SNMP_HP_cpqRackEnclosureRemoved .1.3.6.1.4.1.232.0.22006 The enclosure temperature status has been set to degraded. SNMP_HP_cpqRackEnclosureTempDegraded .1.3.6.1.4.1.232.0.22005 The enclosure temperature status has been set to failed. SNMP_HP_cpqRackEnclosureTempFailed .1.3.6.1.4.1.232.0.6032 The Fault Tolerant Power Supplies have lost redundancy for the specified chassis. SNMP_HP_cpqHe3FltTolPowerRedundancyLost .1.3.6.1.4.1.232.0.6054 The Fault Tolerant Power Supplies have returned to a redundant state for the specified chassis. SNMP_HP_cpqHe3FltTolPowerRedundancyRestored .1.3.6.1.4.1.232.0.6048 The fault tolerant power supply condition has been set back to the OK state for the specified chassis and bay location. SNMP_HP_cpqHe4FltTolPowerSupplyOk PSU chassis 3 PSU bay 4 .1.3.6.1.4.1.232.0.6049 The fault tolerant power supply condition has been set to degraded for the specified chassis and bay location. SNMP_HP_cpqHe4FltTolPowerSupplyDegraded PSU chassis 3 PSU bay 4 .1.3.6.1.4.1.232.0.22027 The fuse has been tripped. SNMP_HP_cpqRackFuseOpen .1.3.6.1.4.1.232.0.9006 The host OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. SNMP_HP_cpqSm2InterfaceError .1.3.6.1.4.1.232.153.0.153006 The humidity of the rack is outside the specified threshold. SNMP_HP_cpqCmcalarmHumidity .1.3.6.1.4.1.232.0.22047 The interconnect status has been set to degraded. SNMP_HP_cpqRackNetConnectorDegraded .1.3.6.1.4.1.232.0.22046 The interconnect status has been set to failed. SNMP_HP_cpqRackNetConnectorFailed .1.3.6.1.4.1.232.0.2004 The monitor's condition has been set to failed due to an operational feature exceeding normal operating limits. SNMP_HP_cpqSiMonitorConditionFailed .1.3.6.1.4.1.232.0.2003 The monitor's condition is degraded due to the internal temperature exceeding normal operating limits. SNMP_HP_cpqSiMonitorConditionDegraded .1.3.6.1.4.1.232.0.22039 The Onboard Administrator has been removed. SNMP_HP_cpqRackEnclosureManagerRemoved .1.3.6.1.4.1.232.0.22037 The Onboard Administrator or other management processor status has been set to degraded. SNMP_HP_cpqRackEnclosureManagerDegraded .1.3.6.1.4.1.232.0.22016 The power supply has been removed. SNMP_HP_cpqRackPowerSupplyRemoved .1.3.6.1.4.1.232.0.22014 The power supply status has been set to degraded. SNMP_HP_cpqRackPowerSupplyDegraded .1.3.6.1.4.1.232.0.22013 The power supply status has been set to failed. SNMP_HP_cpqRackPowerSupplyFailed .1.3.6.1.4.1.232.141.3.2.0.1 The primary controller in the subsytem has failed. SNMP_HP_cpqCrController1FailureTrap .1.3.6.1.4.1.232.153.0.153015 The rack auxiliary alarm input #1 has been triggered. SNMP_HP_cpqCmcalarmAux1 .1.3.6.1.4.1.232.153.0.153016 The rack auxiliary alarm input #2 has been triggered. SNMP_HP_cpqCmcalarmAux2 .1.3.6.1.4.1.232.153.0.153019 The rack door locking device #1 has failed. SNMP_HP_cpqCmcalarmLock1Dev .1.3.6.1.4.1.232.153.0.153020 The rack door locking device #2 has failed. SNMP_HP_cpqCmcalarmLock2Dev .1.3.6.1.4.1.232.0.22018 The rack power subsystem is no longer in a redundant state. SNMP_HP_cpqRackPowerSubsystemNotRedundant .1.3.6.1.4.1.232.0.22020 The rack power subsystem overload condition. SNMP_HP_cpqRackPowerSubsystemOverloadCondition .1.3.6.1.4.1.232.0.22019 The rack power supply detected an input line voltage problem. SNMP_HP_cpqRackPowerSubsystemLineVoltageProblem .1.3.6.1.4.1.232.153.0.153014 The rack shock detector has detected a vibration to the rack. SNMP_HP_cpqCmcalarmShock .1.3.6.1.4.1.232.153.0.153013 The rack smoke detector has detected smoke. SNMP_HP_cpqCmcalarmSmoke .1.3.6.1.4.1.232.0.9004 The Remote Insight battery has failed and needs to be replaced. SNMP_HP_cpqSm2BatteryFailed .1.3.6.1.4.1.232.0.9011 The Remote Insight/ Integrated Lights-Out firmware has detected the logs are full. SNMP_HP_cpqSm2LogsFull .1.3.6.1.4.1.232.141.3.2.0.3 The secondary controller in the subsytem has failed. SNMP_HP_cpqCrController2FailureTrap .1.3.6.1.4.1.232.0.22042 The server blade e-keying has failed. SNMP_HP_cpqRackServerBladeEKeyingFailed .1.3.6.1.4.1.232.153.0.153003 The status of Fan 1 has changed. Action: Refer to Trap Details for more information. SNMP_HP_cpqCmcalarmFan1 .1.3.6.1.4.1.232.153.0.153004 The status of Fan 2 has changed. Action: Refer to Trap Details for more information. SNMP_HP_cpqCmcalarmFan2 .1.3.6.1.4.1.232.0.161006 The switch fan has failed. SNMP_HP_switchFanFailed .1.3.6.1.4.1.232.0.161008 The switch temperature sensor indicates a high temperature condidtion. SNMP_HP_switchTempSensorDegraded .1.3.6.1.4.1.232.0.161009 The switch temperature sensor indicates an over-temperature condition. SNMP_HP_switchTempSensorFailed .1.3.6.1.4.1.232.153.0.153001 The temperature at rack sensor 1 is outside the specified threshold. SNMP_HP_cpqCmcalarmTemp1 .1.3.6.1.4.1.232.153.0.153002 The temperature at rack sensor 2 is outside the specified threshold. SNMP_HP_cpqCmcalarmTemp2 .1.3.6.1.4.1.232.0.12012 The UPS battery is about to fail. Replace as soon as possible. SNMP_HP_cpqUpsPendingBatteryFailure .1.3.6.1.4.1.232.154.2.0.21033 The UPS has been powered off with user interaction. SNMP_HP_cpqRPMTrapUPSManualLoadDumped .1.3.6.1.4.1.232.154.2.0.29998 The UPS has been started on battery when AC input power is not present. SNMP_HP_cpqRPMTrapUPSDCStartOccurred .1.3.6.1.4.1.232.0.12011 The UPS has entered an overload condition. SNMP_HP_cpqUpsOverload .1.3.6.1.4.1.232.0.12001 The UPS reports that the AC line power has failed. SNMP_HP_cpqUpsLineFailed .1.3.6.1.4.1.232.0.1009 This trap is sent when a attached USB storage device is removed SNMP_HP_cpqSeUSBStorageDeviceRemoved Attached USB device name. .1.3.6.1.4.1.232.1.2.22.2 Attached USB device type. .1.3.6.1.4.1.232.1.2.22.1 .1.3.6.1.4.1.232.0.1008 This trap is sent when a USB storage device has been attached SNMP_HP_cpqSeUSBStorageDeviceAttached Attached USB device name. .1.3.6.1.4.1.232.1.2.22.2 Attached USB device type. .1.3.6.1.4.1.232.1.2.22.1 .1.3.6.1.4.1.232.0.22033 Unknown power consumption. SNMP_HP_cpqRackPowerUnknownPowerConsumption .1.3.6.1.4.1.232.0.12010 UPS Battery Low. The server will soon lose power. SNMP_HP_cpqUps2BatteryLow .1.3.6.1.4.1.232.0.12005 UPS Battery Low. The server will soon lose power. SNMP_HP_cpqUpsBatteryLow .1.3.6.1.4.1.232.0.12008 UPS initiating graceful server shutdown. SNMP_HP_cpqUps2Shutdown .1.3.6.1.4.1.232.0.12003 UPS initiating graceful server shutdown. SNMP_HP_cpqUpsShutdown .1.3.6.1.4.1.232.167.0.2 Water Cool Unit Sensor Alarm. SNMP_HP_alarmSensorWaterCoolUnit .1.3.6.1.4.1.232.167.0.6 Water Cool Unit System Alarm. SNMP_HP_alarmWaterCoolUnit