--    Aculab plc ApplianX MIB
--    Version 0.2

--    This is the main MIB for Aculab ApplianX 
--    ISDN, CAS, ISUP, protocol conversion, VoIP media gateway product.
--
--    This document is Copyright (c) 2008 Aculab plc.

ACULAB-APPLIANCE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    enterprises, OBJECT-TYPE, Integer32, MODULE-IDENTITY
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString
        FROM SNMPv2-TC  
    aculab, applianX
        FROM ACULAB-ROOT-MIB;

aculabApplianX  MODULE-IDENTITY
    LAST-UPDATED    "200804141300Z"
    ORGANIZATION    "Aculab plc"
    CONTACT-INFO    "www.aculab.com"
    DESCRIPTION     "MIB for ApplianX SNMPv2"
    ::= { applianX 1 }
   
aculabApplianXStatus OBJECT-IDENTITY
	STATUS current
	-- ACCESS not-accessible
	DESCRIPTION "Generic ApplianX Status"
	::= { aculabApplianX 1 }
	
applianXDefs OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION "Definition point for generic ApplianX types and notifications."
    ::= { aculabApplianXStatus 0 }

applianXTypes OBJECT-IDENTITY
	STATUS	current
	DESCRIPTION "ApplianX Types"
	::= { applianXDefs 1 }

applianXNotifications OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION "Definition point for generic ApplianX types and notifications."
    ::= { applianXDefs 2 }
	
applianXName OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The name that has been applied to the ApplianX"
              ::= { aculabApplianXStatus 1 }

applianXSerialNumber OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"A unique number that identifies the ApplianX"
              ::= { aculabApplianXStatus 2 }

applianXSoftwareVersion OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The version of the software running on the device"
              ::= { aculabApplianXStatus 3 }

applianXSoftwareBuildDate OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The build date of the software running on the device"
              ::= { aculabApplianXStatus 4 }

applianXUptime OBJECT-TYPE
      SYNTAX  TimeTicks
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"the uptime of the ApplianX in 100/ths of a second"
              ::= { aculabApplianXStatus 5 }

--
-- Hardware information
--
applianXHWTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ApplianXHWEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "List of hardware components on this card"
              ::= { aculabApplianXStatus 6 }

applianXHWEntry OBJECT-TYPE
	SYNTAX ApplianXHWEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "Hardware components" 
	INDEX { applianXHWDevice }
	::= { applianXHWTable 1 }

ApplianXHWEntry ::= SEQUENCE {
	applianXHWDevice			INTEGER,
	applianXHWSerial 			DisplayString,
	applianXHWPartNo			DisplayString,
	applianXHWTemp1				INTEGER,
	applianXHWTemp2				INTEGER,
	applianXHW33vVoltage		INTEGER,
	applianXHW5vVoltage			INTEGER
}

applianXHWDevice OBJECT-TYPE
	SYNTAX INTEGER
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION "Device index"
	::= { applianXHWEntry 1 }

applianXHWSerial OBJECT-TYPE
      SYNTAX  		DisplayString (SIZE(1..30))
      MAX-ACCESS  	read-only
      STATUS  		current
      DESCRIPTION	"Device serial number"
              ::= { applianXHWEntry 2 }

applianXHWPartNo OBJECT-TYPE
      SYNTAX  		DisplayString (SIZE(1..20))
      MAX-ACCESS  	read-only
      STATUS  		current
      DESCRIPTION 	"Device part number"
              ::= { applianXHWEntry 3 }
              
applianXHWTemp1 OBJECT-TYPE
      SYNTAX  		INTEGER
      MAX-ACCESS  	read-only
      STATUS  		current
      DESCRIPTION 	"Temperature 1"
              ::= { applianXHWEntry 4 }

applianXHWTemp2 OBJECT-TYPE
      SYNTAX  		INTEGER
      MAX-ACCESS	read-only
      STATUS  		current
      DESCRIPTION	"Temperature 2"
              ::= { applianXHWEntry 5 }

applianXHW33vVoltage OBJECT-TYPE
      SYNTAX  		INTEGER
      MAX-ACCESS	read-only
      STATUS  		current
      DESCRIPTION	"3.3v voltage being received by device"
              ::= { applianXHWEntry 6 }

applianXHW5vVoltage OBJECT-TYPE
      SYNTAX  		INTEGER
      MAX-ACCESS	read-only
      STATUS  		current
      DESCRIPTION	"5v voltage being received by device"
              ::= { applianXHWEntry 7 }              

--
-- Trunk information
--
applianXTrunkTable OBJECT-TYPE
	SYNTAX SEQUENCE OF applianXTrunkEntry
	ACCESS not-accessible
	STATUS current
	DESCRIPTION "List of trunks on this card"
              ::= { aculabApplianXStatus 7 }

applianXTrunkEntry OBJECT-TYPE
	SYNTAX ApplianXTrunkEntry
	ACCESS not-accessible
	STATUS current
	DESCRIPTION "Information about a trunk"
	INDEX { applianXTrunkIx }
	::= { applianXTrunkTable 1 }  

ApplianXTrunkEntry ::= SEQUENCE {
	applianXTrunkIx			INTEGER,
	applianXTrunkProtocol 	DisplayString,
	applianXLayer1bipvios 	INTEGER,
	applianXLayer1faserrs	INTEGER,
	applianXLayer1sliperrs	INTEGER,
	applianXLayer1nos		INTEGER,
	applianXLayer1ais		INTEGER,
	applianXLayer1los		INTEGER,
	applianXLayer1rra 		INTEGER,
	applianXLayer1tra		INTEGER,
	applianXLayer1rma		INTEGER,
	applianXLayer1tma		INTEGER,
	applianXLayer1usr		INTEGER,
	applianXLayer2State		INTEGER 
}

applianXTrunkIx OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Trunk index"
	::= { applianXTrunkEntry 1 }

applianXTrunkProtocol OBJECT-TYPE
      SYNTAX  DisplayString
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"Protocol running on this trunk"
              ::= { applianXTrunkEntry 2 }

applianXLayer1bipvios OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "The number of frames that include at least 1 bit error in the Frame Alignment Signal"
	::= { applianXTrunkEntry 3 }

applianXLayer1faserrs	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "The number of frames that include at least 1 bit error in the Frame Alignment Signal"
	::= { applianXTrunkEntry 4 }

applianXLayer1sliperrs	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "The number of received frame slips in the incoming G703 signal"
	::= { applianXTrunkEntry 5 }

applianXLayer1nos	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that this trunk is not receiving a signal"
	::= { applianXTrunkEntry 6 }

applianXLayer1ais	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that this trunk is receiving an Alarm Indication from the far end"
	::= { applianXTrunkEntry 7 }

applianXLayer1los	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that this trunk has lost synchronisation"
	::= { applianXTrunkEntry 8 }

applianXLayer1rra	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that the far end is sending a remote alarm to this trunk"
	::= { applianXTrunkEntry 9 }

applianXLayer1tra	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that a remote alarm is being transmitted by this trunk"
	::= { applianXTrunkEntry 10 }

applianXLayer1rma	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that the far end is sending a multiframe alarm to this trunk"
	::= { applianXTrunkEntry 11 }

applianXLayer1tma OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Indicates that a multiframe alarm is being transmitted by this trunk"
	::= { applianXTrunkEntry 12 }

applianXLayer1usr	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Provides fault conditions described in CCITT I431"
	::= { applianXTrunkEntry 13 }

applianXLayer2State OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "Layer 2 state for this trunk "
	::= { applianXTrunkEntry 14 }


--
-- Network interfaces
--
applianXNetworkIfTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ApplianXNetworkIfEntry
	ACCESS not-accessible
	STATUS current
	DESCRIPTION "State of the specified media interface"
              ::= { aculabApplianXStatus 8 }

applianXNetworkIfEntry OBJECT-TYPE
	SYNTAX 	ApplianXNetworkIfEntry
	ACCESS not-accessible
	STATUS current
	DESCRIPTION "The status of a single network interface"
	INDEX { applianXNetworkIfIx }
	::= { applianXNetworkIfTable 1 }

ApplianXNetworkIfEntry ::= SEQUENCE {
		applianXNetworkIfIx					INTEGER,
		applianXNetworkIfConnectionState 	INTEGER,
		applianXNetworkIfSpeed				INTEGER, 
		applianXNetworkIfPacketsReceived	INTEGER,
		applianXNetworkIfPacketsSent		INTEGER
	}

applianXNetworkIfIx	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Interface index"
	::= { applianXNetworkIfEntry 1 }

applianXNetworkIfConnectionState	 OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "State of the interface"
	::= { applianXNetworkIfEntry 2 }
	
applianXNetworkIfSpeed	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Speed of the connection"
	::= { applianXNetworkIfEntry 3 }
 
applianXNetworkIfPacketsReceived	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Number of packets received on this interface"
	::= { applianXNetworkIfEntry 4 }
	
applianXNetworkIfPacketsSent	 OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Number of packets sent on this interface"
	::= { applianXNetworkIfEntry 5 }

--
-- Notifications
--
applianXAlarmIx OBJECT-TYPE
	SYNTAX 			Integer32
	ACCESS 			read-only
	STATUS 			current
	DESCRIPTION 	"The resource that has raised the notification"
		::= { applianXTypes 1 }

applianXAlarmStatus OBJECT-TYPE
	SYNTAX INTEGER {
		down(0),
		up(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "The status of the resource"
	::= { applianXTypes 2 }

applianXClockSource OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION "The current clock source for the applianX"
	::= { applianXTypes 3 }

applianXClockStatus OBJECT-TYPE
	SYNTAX INTEGER {
		bad(0),
		good(1)
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "The current state of the clock"
	::= { applianXTypes 4 }

applianXSystemNotificationCategory OBJECT-TYPE
	SYNTAX INTEGER {
		general(0),			-- notifications that don't fall into another category
		configuration(1),	-- notifications relating to configuration loading
		system(2),			-- notifications relating to system functionality (starting/stopping/etc)
		webInterface(3)		-- notifications relating to the web interface
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "The category of the event being reported"
	::= { applianXTypes 5 }

applianXSystemNotificationSeverity OBJECT-TYPE
	SYNTAX INTEGER {
		informational(0),	-- this notification is for information only
		warning(1),			-- this notification is a warning
		error(2),			-- this notification indicates that an error has occurred.  Call traffic may be affected.
		critical(3)			-- this notification indicates that a critical error has occurred.  Call traffic is definitely affected.
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "The severity of the event being reported"
	::= { applianXTypes 6 }

applianXSystemNotificationEvent OBJECT-TYPE
	SYNTAX INTEGER {
		gatewayInitialised(0),						-- indicates that the gateway is initialising
		gatewayTerminated(1),						-- indicates that the gateway has terminated
		gatewayRunning(2),							-- indicates that the gateway is able to handle calls
		gatewayStopped(3),							-- indicates that the gateway is not able to handle calls
		configurationLoadStarted(20),				-- the gateway has begun to load a configuration
		configurationLoadSucceeded(21),				-- the gateway has finished loading a configuration
		configurationLoadFailed(22),				-- the gateway has failed to load a configuration
		configurationNotSpecified(23),				-- There is no configuration to be loaded  
		protocolFirmwareDownloadSucceeded(40),		-- call control firmware has been downloaded
		protocolFirmwareDownloadFailed(41),			-- call control firmware has failed to be downloaded
		dspFirmwareDownloadSucceeded(60),			-- dsp firmware has been downloaded
		dspFirmwareDownloadFailed(61),				-- dsp firmware has failed to download
		webInterfaceLoginSuccessful(80),			-- a user has logged into the web interface
		webInterfaceLoginFailed(81),				-- a user has failed to log into the web interface
		monitoredProcessRunning(100),
		monitoredProcessStopped(101),
		monitoredProcessTimedOut(102),
		monitoredProcessFailed(103),
		processDumpedCore(120)						-- a process has dumped core
	}
	ACCESS read-only
	STATUS current
	DESCRIPTION "The type of event being reported"
	::= { applianXTypes 7 }


applianXSystemNotificationMessage OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS current
	DESCRIPTION "Descriptive text for the event being reported"
	::= { applianXTypes 8 }


applianXSystemNotificationIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS current
	DESCRIPTION "Index of resource raising trap (not all events provide a meaningful value for this item"
	::= { applianXTypes 9 }

applianXTrunkLayer1StatusNotification NOTIFICATION-TYPE
	OBJECTS { applianXAlarmIx, applianXAlarmStatus }
	STATUS current
	DESCRIPTION "This trap is generated when layer 1 on a trunk changes state"
	::= { applianXNotifications 1 }

applianXNetworkIfStatusNotification NOTIFICATION-TYPE
	OBJECTS { applianXAlarmIx, applianXAlarmStatus }
	STATUS current
	DESCRIPTION "This trap is generated when a media interface changes state"
	::= { applianXNotifications 2 }
	
applianXSystemNotification NOTIFICATION-TYPE
	OBJECTS { 
		applianXSystemNotificationCategory, 
		applianXSystemNotificationSeverity, 
		applianXSystemNotificationEvent, 
		applianXSystemNotificationMessage, 
		applianXSystemNotificationIndex 
	}
	STATUS current
	DESCRIPTION "This trap indicates that a system event has occurred."
	::= { applianXNotifications 3 }

applianXTrunkLayer2StatusNotification NOTIFICATION-TYPE
	OBJECTS { applianXAlarmIx, applianXAlarmStatus }
	STATUS current
	DESCRIPTION "This trap is generated when layer 2 on a trunk changes state"
	::= { applianXNotifications 4 }

--
-- Gateway product specific objects
--
aculabApplianXGateway OBJECT-IDENTITY
	STATUS current	
	DESCRIPTION "Gateway status"
	::= { aculabApplianX 2 }

applianXRegistrations OBJECT-TYPE
      SYNTAX  Integer32
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The number of successful registration requests processed by the server"
              ::= { aculabApplianXGateway 1 }

applianXAuthType OBJECT-TYPE
      SYNTAX  INTEGER {
			none(1),
			MD5(2),
			Radius(3),
			RadiusDB(4)
			}
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The Type of Authorisation Scheme in use by the server"
              ::= { aculabApplianXGateway 2 }

applianXInCallCount OBJECT-TYPE
      SYNTAX  Integer32
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The number of successful incoming calls handled by the server"
              ::= { aculabApplianXGateway 3 }

applianXOutCallCount OBJECT-TYPE
      SYNTAX  Integer32
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The number of successful outgoing calls made by the server"
              ::= { aculabApplianXGateway 4 }

applianXUnRouteableCall OBJECT-TYPE
      SYNTAX  Integer32
      ACCESS  read-only
      STATUS  current
      DESCRIPTION
		"The number of unroutable calls handled by the server"
              ::= { aculabApplianXGateway 5 }

END