NetXMS Support Forum

Hello

What could cause constant peer hopping between interfaces. I have Mikrotik router with Cisco switch. They are connected via trunk port. In event logs the switch (peer) is constantly changing between Bridge interface and eth 5 (interface with public ip).

Logs:
15602046 21.10.2020 13:09:22 21.10.2020 13:09:22 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface Bridge is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15601843 21.10.2020 13:04:48 21.10.2020 13:04:48 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface ether5 is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15600621 21.10.2020 12:39:16 21.10.2020 12:39:16 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface Bridge is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15600356 21.10.2020 12:34:46 21.10.2020 12:34:46 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface ether5 is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15599406 21.10.2020 12:09:04 21.10.2020 12:09:04 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface Bridge is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15599315 21.10.2020 12:04:41 21.10.2020 12:04:41 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface ether5 is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15598004 21.10.2020 11:39:01 21.10.2020 11:39:01 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface Bridge is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0
15597867 21.10.2020 11:34:38 21.10.2020 11:34:38 System [Router] Site Default 0 SYS_IF_PEER_CHANGED Normal New peer for interface ether5 is [Sw] Site - Core interface Gi1/0/24 (A4:B2:39:C3:4D:98) 0