I have an with some dlink switches (not with netgear and cisco switches).
I get "VLAN list successfully retrieved from node"
[09.09.2018 20:54:13] **** Poll request sent to server ****
[09.09.2018 20:54:14] Poll request accepted
[09.09.2018 20:54:14] Starting topology poll for node Library
[09.09.2018 20:54:14] VLAN list successfully retrieved from node
[09.09.2018 20:54:20] Switch forwarding database retrieved
[09.09.2018 20:54:21] Link layer topology retrieved (1 connections found)
[09.09.2018 20:54:21] Updating peer information on interfaces
[09.09.2018 20:54:21] Link layer topology processed
[09.09.2018 20:54:21] Finished topology poll for node Library
[09.09.2018 20:54:21] **** Poll completed successfully ****
but nothing shows up in the dlink VLAN column on the interfaces tab (cisco and netgear switch interface tabs show vlan information in vlan column)
Dlink MIB seems to be loaded because in the netxms MIB browser for the dlink switch I can see the vlan table OID for the switch, with OID as text and description filled as below, and SNMP walking it gives me vlan names and egress and untagged members
.1.3.6.1.4.1.171.10.76.9.7.6.1
.iso.org.dod.internet.private.enterprises.d-link.dlink-products.dlink-DGS1210SeriesProd.dgs-1210-16ax.companyDot1qVlanGroup.dot1qVlanTable.dot1qVlanEntry
Hi, I have the same issue with the Junipers EX3400. Did you find a solution for your issue?
Thanks
making sure LLDP was enabled on both dlink and cisco devices fixed most issues
MIB file as such will not add VLAN information, we have to make changes to device driver so it read non-standard MIB. If you can provide SNMP access to test device we can implement necessary changes in D-Link driver for reading VLAN information.
Best regards,
Victor