3 SNMP_TRAPS_BAYSTACK_bsnTemperatureExceeded 101600 5 1 This notification is generated when the temperature of a chassis component has exceeded some threshold. The instance of s5ChasComType included in the notification identifies the component. This notification is generated when the temperature of a chassis component has exceeded some threshold. The instance of s5ChasComType included in the notification identifies the component. OBJECTS: s5ChasComType SNMP_TRAPS_BAYSTACK_bsnTrialLicenseExpiration 101601 5 1 This notification is generated to indicate that a trial license is going to expire soon, or has already expired. This notification is generated to indicate that a trial license is going to expire soon, or has already expired. OBJECTS: bsnTrialLicenseExpirationTime bsnTrialLicenseExpirationNumber SNMP_TRAPS_BAYSTACK_bsnStackManagerReconfiguration 101602 5 1 This notification is generated by a stackable system when the stack manager detects a problem with a link between stack members. This notification is generated by a stackable system when the stack manager detects a problem with a link between stack members. OBJECTS: SNMP_TRAPS_BAYSTACK_bsnPortSpeedDuplexMismatch 101603 5 1 This notification is generated when a speed or duplex mismatch is detected. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. This notification is generated when a speed or duplex mismatch is detected. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. OBJECTS: ifIndex SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledToPreventBroadcastStorm 101604 5 1 This notification is generated when a LAG port that was port of a trunk is disabled as a result of the LAC setting on the port being turned off. This notification is generated when a LAG port that was port of a trunk is disabled as a result of the LAC setting on the port being turned off. OBJECTS: ifIndex SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledDueToLossOfVLACPDU 101605 5 1 Generated when a port is disabled due to the loss of a VLACP PDU. Generated when a port is disabled due to the loss of a VLACP PDU. OBJECTS: ifIndex SNMP_TRAPS_BAYSTACK_bsnTrunkPortEnabledToPreventBroadcastStorm 101606 5 1 This notification is generated when an MLT port is enabled as a result of an MLT trunk being disabled. This notification is generated when an MLT port is enabled as a result of an MLT trunk being disabled. OBJECTS: ifIndex SNMP_TRAPS_BAYSTACK_bsnLacTrunkUnavailable 101607 5 1 This notification is generated when an attempt is made to form an 802.3ad LAG trunk, but there are no available resources to create a new trunk. The condition usually occurs because a system has some hardware or software limit on the number of trunks that can be created. This notification is generated when an attempt is made to form an 802.3ad LAG trunk, but there are no available resources to create a new trunk. The condition usually occurs because a system has some hardware or software limit on the number of trunks that can be created. OBJECTS: SNMP_TRAPS_BAYSTACK_bsnEapUbpFailure 101608 5 1 This notification is generated when installation of a UBP policy fails following EAP authentication. This notification is generated when installation of a UBP policy fails following EAP authentication. OBJECTS: bsnEapUbpFailureIfIndex bsnEapUbpFailureMacAddress bsnEapUbpFailureRoleString SNMP_TRAPS_BAYSTACK_bsnConfigurationSavedToNvram 101609 5 1 This notification is generated whenever the device saves its configuration to non-volatile storage. The system should limit the frequency with which this notification is generated, as frequent configuration changes could potentially generate too many of these notifications. How the frequency is limitted is an implementation details, but it is suggested that no more than one notification be generated per minute. This notification is generated whenever the device saves its configuration to non-volatile storage. The system should limit the frequency with which this notification is generated, as frequent configuration changes could potentially generate too many of these notifications. How the frequency is limitted is an implementation details, but it is suggested that no more than one notification be generated per minute. OBJECTS: SNMP_TRAPS_BAYSTACK_bsnEapAccessViolation 101610 5 1 This notification is generated whenever an EAP access violation occurs. This notification is generated whenever an EAP access violation occurs. OBJECTS: dot1xAuthPaeState dot1xAuthBackendAuthState bsnEapAccessViolationMacAddress SNMP_TRAPS_BAYSTACK_bsnLacPortEnabledDueToReceiptOfVLACPDU 101611 5 1 Generated when a port is enabled due to receipt of a VLACP PDU. Generated when a port is enabled due to receipt of a VLACP PDU. OBJECTS: ifIndex SNMP_TRAPS_BAYSTACK_bsnEnteredForcedStackMode 101612 5 1 This notification is generated to indicate that a switch has entered forced stack mode. This notification is generated to indicate that a switch has entered forced stack mode. OBJECTS: bsnEnteredForcedStackModeMAC SNMP_TRAPS_BAYSTACK_bsnLoginFailure 101613 5 1 This notification is generated when an attempt to login to the system fails as a result of an incorrect password. This notification is generated when an attempt to login to the system fails as a result of an incorrect password. OBJECTS: bsnLoginFailureType bsnLoginFailureAddressType bsnLoginFailureAddress bsnLoginFailureUsername SNMP_TRAPS_BAYSTACK_bsnTrunkPortDisabledToPreventBroadcastStorm 101614 5 1 This notification is generated when an MLT port is disabled as a result of an MLT trunk being disabled. This notification is generated when an MLT port is disabled as a result of an MLT trunk being disabled. OBJECTS: ifIndex SNMP_TRAPS_BAYSTACK_bsnMLTHealthFailure 101615 5 1 This notification is generated when a receiving switch does not receive an expected number of autotopology frames on an MLT in a given time interval from the sending switch(es) on the other end of the MLT. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. The ifAdminStatus object reflects the state of the port. The port may be partitioned by the switch or still be active depending on the detection algorithm's control parameters. This notification is generated when a receiving switch does not receive an expected number of autotopology frames on an MLT in a given time interval from the sending switch(es) on the other end of the MLT. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. The ifAdminStatus object reflects the state of the port. The port may be partitioned by the switch or still be active depending on the detection algorithm's control parameters. OBJECTS: ifAdminStatus SNMP_TRAPS_BAYSTACK_bsnStackConfigurationError 101616 5 1 This notification is generated when the expected size of a stack is not equal to the actual size of the stack. This notification is generated when the expected size of a stack is not equal to the actual size of the stack. OBJECTS: bayStackConfigExpectedStackSize bsnActualStackSize 1.3.6.1.4.1.45.5.2.2.0.17This notification is generated when the temperature of a chassis component has exceeded some threshold. The instance of s5ChasComType included in the notification identifies the component. s5ChasComType SNMP_TRAPS_BAYSTACK_bsnTemperatureExceeded 0 s5ChasComType 1 1.3.6.1.4.1.45.5.2.2.0.15This notification is generated to indicate that a trial license is going to expire soon, or has already expired. bsnTrialLicenseExpirationTime bsnTrialLicenseExpirationNumber SNMP_TRAPS_BAYSTACK_bsnTrialLicenseExpiration 0 bsnTrialLicenseExpirationTime 1 0 bsnTrialLicenseExpirationNumber 2 1.3.6.1.4.1.45.5.2.2.0.4This notification is generated by a stackable system when the stack manager detects a problem with a link between stack members. SNMP_TRAPS_BAYSTACK_bsnStackManagerReconfiguration 1.3.6.1.4.1.45.5.2.2.0.3This notification is generated when a speed or duplex mismatch is detected. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. ifIndex SNMP_TRAPS_BAYSTACK_bsnPortSpeedDuplexMismatch 0 ifIndex 1 1.3.6.1.4.1.45.5.2.2.0.9This notification is generated when a LAG port that was port of a trunk is disabled as a result of the LAC setting on the port being turned off. ifIndex SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledToPreventBroadcastStorm 0 ifIndex 1 1.3.6.1.4.1.45.5.2.2.0.11Generated when a port is disabled due to the loss of a VLACP PDU. ifIndex SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledDueToLossOfVLACPDU 0 ifIndex 1 1.3.6.1.4.1.45.5.2.2.0.10This notification is generated when an MLT port is enabled as a result of an MLT trunk being disabled. ifIndex SNMP_TRAPS_BAYSTACK_bsnTrunkPortEnabledToPreventBroadcastStorm 0 ifIndex 1 1.3.6.1.4.1.45.5.2.2.0.5This notification is generated when an attempt is made to form an 802.3ad LAG trunk, but there are no available resources to create a new trunk. The condition usually occurs because a system has some hardware or software limit on the number of trunks that can be created. SNMP_TRAPS_BAYSTACK_bsnLacTrunkUnavailable 1.3.6.1.4.1.45.5.2.2.0.14This notification is generated when installation of a UBP policy fails following EAP authentication. bsnEapUbpFailureIfIndex bsnEapUbpFailureMacAddress bsnEapUbpFailureRoleString SNMP_TRAPS_BAYSTACK_bsnEapUbpFailure 0 bsnEapUbpFailureIfIndex 1 0 bsnEapUbpFailureMacAddress 2 0 bsnEapUbpFailureRoleString 3 1.3.6.1.4.1.45.5.2.2.0.1This notification is generated whenever the device saves its configuration to non-volatile storage. The system should limit the frequency with which this notification is generated, as frequent configuration changes could potentially generate too many of these notifications. How the frequency is limitted is an implementation details, but it is suggested that no more than one notification be generated per minute. SNMP_TRAPS_BAYSTACK_bsnConfigurationSavedToNvram 1.3.6.1.4.1.45.5.2.2.0.2This notification is generated whenever an EAP access violation occurs. dot1xAuthPaeState dot1xAuthBackendAuthState bsnEapAccessViolationMacAddress SNMP_TRAPS_BAYSTACK_bsnEapAccessViolation 0 dot1xAuthPaeState 1 0 dot1xAuthBackendAuthState 2 0 bsnEapAccessViolationMacAddress 3 1.3.6.1.4.1.45.5.2.2.0.12Generated when a port is enabled due to receipt of a VLACP PDU. ifIndex SNMP_TRAPS_BAYSTACK_bsnLacPortEnabledDueToReceiptOfVLACPDU 0 ifIndex 1 1.3.6.1.4.1.45.5.2.2.0.16This notification is generated to indicate that a switch has entered forced stack mode. bsnEnteredForcedStackModeMAC SNMP_TRAPS_BAYSTACK_bsnEnteredForcedStackMode 0 bsnEnteredForcedStackModeMAC 1 1.3.6.1.4.1.45.5.2.2.0.6This notification is generated when an attempt to login to the system fails as a result of an incorrect password. bsnLoginFailureType bsnLoginFailureAddressType bsnLoginFailureAddress bsnLoginFailureUsername SNMP_TRAPS_BAYSTACK_bsnLoginFailure 0 bsnLoginFailureType 1 0 bsnLoginFailureAddressType 2 0 bsnLoginFailureAddress 3 0 bsnLoginFailureUsername 4 1.3.6.1.4.1.45.5.2.2.0.8This notification is generated when an MLT port is disabled as a result of an MLT trunk being disabled. ifIndex SNMP_TRAPS_BAYSTACK_bsnTrunkPortDisabledToPreventBroadcastStorm 0 ifIndex 1 1.3.6.1.4.1.45.5.2.2.0.7This notification is generated when a receiving switch does not receive an expected number of autotopology frames on an MLT in a given time interval from the sending switch(es) on the other end of the MLT. Once notification has been sent, further notifications may be sent, but it is suggested these be at least 5 minutes apart. The ifAdminStatus object reflects the state of the port. The port may be partitioned by the switch or still be active depending on the detection algorithm's control parameters. ifAdminStatus SNMP_TRAPS_BAYSTACK_bsnMLTHealthFailure 0 ifAdminStatus 1 1.3.6.1.4.1.45.5.2.2.0.13This notification is generated when the expected size of a stack is not equal to the actual size of the stack. bayStackConfigExpectedStackSize bsnActualStackSize SNMP_TRAPS_BAYSTACK_bsnStackConfigurationError 0 bayStackConfigExpectedStackSize 1 0 bsnActualStackSize 2