3
SNMP_TRAPS_BAYSTACK_bsnTemperatureExceeded
101600
5
1
This notification is generated when the temperature of a chassis
component has exceeded some threshold. The instance of s5ChasComType
included in the notification identifies the component.
This notification is generated when the temperature of a chassis
component has exceeded some threshold. The instance of s5ChasComType
included in the notification identifies the component.
OBJECTS:
s5ChasComType
SNMP_TRAPS_BAYSTACK_bsnTrialLicenseExpiration
101601
5
1
This notification is generated to indicate that a trial license is
going to expire soon, or has already expired.
This notification is generated to indicate that a trial license is
going to expire soon, or has already expired.
OBJECTS:
bsnTrialLicenseExpirationTime
bsnTrialLicenseExpirationNumber
SNMP_TRAPS_BAYSTACK_bsnStackManagerReconfiguration
101602
5
1
This notification is generated by a stackable system when the stack
manager detects a problem with a link between stack members.
This notification is generated by a stackable system when the stack
manager detects a problem with a link between stack members.
OBJECTS:
SNMP_TRAPS_BAYSTACK_bsnPortSpeedDuplexMismatch
101603
5
1
This notification is generated when a speed or duplex mismatch
is detected. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
This notification is generated when a speed or duplex mismatch
is detected. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
OBJECTS:
ifIndex
SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledToPreventBroadcastStorm
101604
5
1
This notification is generated when a LAG port that was port of
a trunk is disabled as a result of the LAC setting on the port
being turned off.
This notification is generated when a LAG port that was port of
a trunk is disabled as a result of the LAC setting on the port
being turned off.
OBJECTS:
ifIndex
SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledDueToLossOfVLACPDU
101605
5
1
Generated when a port is disabled due to the loss of a VLACP PDU.
Generated when a port is disabled due to the loss of a VLACP PDU.
OBJECTS:
ifIndex
SNMP_TRAPS_BAYSTACK_bsnTrunkPortEnabledToPreventBroadcastStorm
101606
5
1
This notification is generated when an MLT port is enabled as
a result of an MLT trunk being disabled.
This notification is generated when an MLT port is enabled as
a result of an MLT trunk being disabled.
OBJECTS:
ifIndex
SNMP_TRAPS_BAYSTACK_bsnLacTrunkUnavailable
101607
5
1
This notification is generated when an attempt is made to form an
802.3ad LAG trunk, but there are no available resources to create
a new trunk. The condition usually occurs because a system has
some hardware or software limit on the number of trunks that can
be created.
This notification is generated when an attempt is made to form an
802.3ad LAG trunk, but there are no available resources to create
a new trunk. The condition usually occurs because a system has
some hardware or software limit on the number of trunks that can
be created.
OBJECTS:
SNMP_TRAPS_BAYSTACK_bsnEapUbpFailure
101608
5
1
This notification is generated when installation of a UBP
policy fails following EAP authentication.
This notification is generated when installation of a UBP
policy fails following EAP authentication.
OBJECTS:
bsnEapUbpFailureIfIndex
bsnEapUbpFailureMacAddress
bsnEapUbpFailureRoleString
SNMP_TRAPS_BAYSTACK_bsnConfigurationSavedToNvram
101609
5
1
This notification is generated whenever the device saves
its configuration to non-volatile storage. The system should
limit the frequency with which this notification is generated,
as frequent configuration changes could potentially generate
too many of these notifications. How the frequency is limitted
is an implementation details, but it is suggested that no more
than one notification be generated per minute.
This notification is generated whenever the device saves
its configuration to non-volatile storage. The system should
limit the frequency with which this notification is generated,
as frequent configuration changes could potentially generate
too many of these notifications. How the frequency is limitted
is an implementation details, but it is suggested that no more
than one notification be generated per minute.
OBJECTS:
SNMP_TRAPS_BAYSTACK_bsnEapAccessViolation
101610
5
1
This notification is generated whenever an EAP access violation
occurs.
This notification is generated whenever an EAP access violation
occurs.
OBJECTS:
dot1xAuthPaeState
dot1xAuthBackendAuthState
bsnEapAccessViolationMacAddress
SNMP_TRAPS_BAYSTACK_bsnLacPortEnabledDueToReceiptOfVLACPDU
101611
5
1
Generated when a port is enabled due to receipt of a VLACP PDU.
Generated when a port is enabled due to receipt of a VLACP PDU.
OBJECTS:
ifIndex
SNMP_TRAPS_BAYSTACK_bsnEnteredForcedStackMode
101612
5
1
This notification is generated to indicate that a switch has
entered forced stack mode.
This notification is generated to indicate that a switch has
entered forced stack mode.
OBJECTS:
bsnEnteredForcedStackModeMAC
SNMP_TRAPS_BAYSTACK_bsnLoginFailure
101613
5
1
This notification is generated when an attempt to login to the
system fails as a result of an incorrect password.
This notification is generated when an attempt to login to the
system fails as a result of an incorrect password.
OBJECTS:
bsnLoginFailureType
bsnLoginFailureAddressType
bsnLoginFailureAddress
bsnLoginFailureUsername
SNMP_TRAPS_BAYSTACK_bsnTrunkPortDisabledToPreventBroadcastStorm
101614
5
1
This notification is generated when an MLT port is disabled as
a result of an MLT trunk being disabled.
This notification is generated when an MLT port is disabled as
a result of an MLT trunk being disabled.
OBJECTS:
ifIndex
SNMP_TRAPS_BAYSTACK_bsnMLTHealthFailure
101615
5
1
This notification is generated when a receiving switch does not
receive an expected number of autotopology frames on an MLT in a
given time interval from the sending switch(es) on the other end
of the MLT. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
The ifAdminStatus object reflects the state of the port. The port
may be partitioned by the switch or still be active depending on
the detection algorithm's control parameters.
This notification is generated when a receiving switch does not
receive an expected number of autotopology frames on an MLT in a
given time interval from the sending switch(es) on the other end
of the MLT. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
The ifAdminStatus object reflects the state of the port. The port
may be partitioned by the switch or still be active depending on
the detection algorithm's control parameters.
OBJECTS:
ifAdminStatus
SNMP_TRAPS_BAYSTACK_bsnStackConfigurationError
101616
5
1
This notification is generated when the expected size of
a stack is not equal to the actual size of the stack.
This notification is generated when the expected size of
a stack is not equal to the actual size of the stack.
OBJECTS:
bayStackConfigExpectedStackSize
bsnActualStackSize
1.3.6.1.4.1.45.5.2.2.0.17This notification is generated when the temperature of a chassis
component has exceeded some threshold. The instance of s5ChasComType
included in the notification identifies the component.
s5ChasComType
SNMP_TRAPS_BAYSTACK_bsnTemperatureExceeded
0
s5ChasComType
1
1.3.6.1.4.1.45.5.2.2.0.15This notification is generated to indicate that a trial license is
going to expire soon, or has already expired.
bsnTrialLicenseExpirationTime
bsnTrialLicenseExpirationNumber
SNMP_TRAPS_BAYSTACK_bsnTrialLicenseExpiration
0
bsnTrialLicenseExpirationTime
1
0
bsnTrialLicenseExpirationNumber
2
1.3.6.1.4.1.45.5.2.2.0.4This notification is generated by a stackable system when the stack
manager detects a problem with a link between stack members.
SNMP_TRAPS_BAYSTACK_bsnStackManagerReconfiguration
1.3.6.1.4.1.45.5.2.2.0.3This notification is generated when a speed or duplex mismatch
is detected. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
ifIndex
SNMP_TRAPS_BAYSTACK_bsnPortSpeedDuplexMismatch
0
ifIndex
1
1.3.6.1.4.1.45.5.2.2.0.9This notification is generated when a LAG port that was port of
a trunk is disabled as a result of the LAC setting on the port
being turned off.
ifIndex
SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledToPreventBroadcastStorm
0
ifIndex
1
1.3.6.1.4.1.45.5.2.2.0.11Generated when a port is disabled due to the loss of a VLACP PDU.
ifIndex
SNMP_TRAPS_BAYSTACK_bsnLacPortDisabledDueToLossOfVLACPDU
0
ifIndex
1
1.3.6.1.4.1.45.5.2.2.0.10This notification is generated when an MLT port is enabled as
a result of an MLT trunk being disabled.
ifIndex
SNMP_TRAPS_BAYSTACK_bsnTrunkPortEnabledToPreventBroadcastStorm
0
ifIndex
1
1.3.6.1.4.1.45.5.2.2.0.5This notification is generated when an attempt is made to form an
802.3ad LAG trunk, but there are no available resources to create
a new trunk. The condition usually occurs because a system has
some hardware or software limit on the number of trunks that can
be created.
SNMP_TRAPS_BAYSTACK_bsnLacTrunkUnavailable
1.3.6.1.4.1.45.5.2.2.0.14This notification is generated when installation of a UBP
policy fails following EAP authentication.
bsnEapUbpFailureIfIndex
bsnEapUbpFailureMacAddress
bsnEapUbpFailureRoleString
SNMP_TRAPS_BAYSTACK_bsnEapUbpFailure
0
bsnEapUbpFailureIfIndex
1
0
bsnEapUbpFailureMacAddress
2
0
bsnEapUbpFailureRoleString
3
1.3.6.1.4.1.45.5.2.2.0.1This notification is generated whenever the device saves
its configuration to non-volatile storage. The system should
limit the frequency with which this notification is generated,
as frequent configuration changes could potentially generate
too many of these notifications. How the frequency is limitted
is an implementation details, but it is suggested that no more
than one notification be generated per minute.
SNMP_TRAPS_BAYSTACK_bsnConfigurationSavedToNvram
1.3.6.1.4.1.45.5.2.2.0.2This notification is generated whenever an EAP access violation
occurs.
dot1xAuthPaeState
dot1xAuthBackendAuthState
bsnEapAccessViolationMacAddress
SNMP_TRAPS_BAYSTACK_bsnEapAccessViolation
0
dot1xAuthPaeState
1
0
dot1xAuthBackendAuthState
2
0
bsnEapAccessViolationMacAddress
3
1.3.6.1.4.1.45.5.2.2.0.12Generated when a port is enabled due to receipt of a VLACP PDU.
ifIndex
SNMP_TRAPS_BAYSTACK_bsnLacPortEnabledDueToReceiptOfVLACPDU
0
ifIndex
1
1.3.6.1.4.1.45.5.2.2.0.16This notification is generated to indicate that a switch has
entered forced stack mode.
bsnEnteredForcedStackModeMAC
SNMP_TRAPS_BAYSTACK_bsnEnteredForcedStackMode
0
bsnEnteredForcedStackModeMAC
1
1.3.6.1.4.1.45.5.2.2.0.6This notification is generated when an attempt to login to the
system fails as a result of an incorrect password.
bsnLoginFailureType
bsnLoginFailureAddressType
bsnLoginFailureAddress
bsnLoginFailureUsername
SNMP_TRAPS_BAYSTACK_bsnLoginFailure
0
bsnLoginFailureType
1
0
bsnLoginFailureAddressType
2
0
bsnLoginFailureAddress
3
0
bsnLoginFailureUsername
4
1.3.6.1.4.1.45.5.2.2.0.8This notification is generated when an MLT port is disabled as
a result of an MLT trunk being disabled.
ifIndex
SNMP_TRAPS_BAYSTACK_bsnTrunkPortDisabledToPreventBroadcastStorm
0
ifIndex
1
1.3.6.1.4.1.45.5.2.2.0.7This notification is generated when a receiving switch does not
receive an expected number of autotopology frames on an MLT in a
given time interval from the sending switch(es) on the other end
of the MLT. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
The ifAdminStatus object reflects the state of the port. The port
may be partitioned by the switch or still be active depending on
the detection algorithm's control parameters.
ifAdminStatus
SNMP_TRAPS_BAYSTACK_bsnMLTHealthFailure
0
ifAdminStatus
1
1.3.6.1.4.1.45.5.2.2.0.13This notification is generated when the expected size of
a stack is not equal to the actual size of the stack.
bayStackConfigExpectedStackSize
bsnActualStackSize
SNMP_TRAPS_BAYSTACK_bsnStackConfigurationError
0
bayStackConfigExpectedStackSize
1
0
bsnActualStackSize
2