3
SNMP_TRAPS_BAYSTACK_s5EtrPortAutoPart
102400
5
1
A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
OBJECTS:
s5EnPortPartStatus
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacTableCleared
102401
5
1
This trap is sent when the mac-security address table
is cleared for all ports.
This trap is sent when the mac-security address table
is cleared for all ports.
OBJECTS:
SNMP_TRAPS_BAYSTACK_s5EtrMgmAccessViolation
102402
5
1
This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
OBJECTS:
s5SbsMgmViolationType
s5SbsMgmViolationIpAddress
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacTableClearedForPort
102403
5
1
This trap is sent when the mac-security address table
is cleared for a particular port.
This trap is sent when the mac-security address table
is cleared for a particular port.
OBJECTS:
s5SbsViolationStatusBrdIndx
s5SbsViolationStatusPortIndx
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacTableFull
102404
5
1
This trap is sent when the mac-security address table
is filled.
This trap is sent when the mac-security address table
is filled.
OBJECTS:
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacAccessViolation
102405
5
1
This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
this violation
This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
this violation
OBJECTS:
s5SbsViolationStatusBrdIndx
s5SbsViolationStatusPortIndx
s5SbsViolationStatusMACAddress
SNMP_TRAPS_BAYSTACK_s5EtrRedPortFailure
102406
5
1
A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault.
A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault.
OBJECTS:
s5EnRedPortOperStatus
s5EnRedPortCompanionBrdNum
s5EnRedPortCompanionPortNum
s5EnPortPartStatus
s5EnPortLinkStatus
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrRedBadRemCfgDetected
102407
5
1
This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port.
This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port.
OBJECTS:
s5EnRedPortRemoteOperStatus
s5EnRedPortRedundMode
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacRemoved
102408
5
1
This trap is sent when a mac address is removed from the
mac-security address table.
This trap is sent when a mac address is removed from the
mac-security address table.
OBJECTS:
s5SbsViolationStatusBrdIndx
s5SbsViolationStatusPortIndx
s5SbsViolationStatusMACAddress
SNMP_TRAPS_BAYSTACK_s5EtrPortManualPart
102409
5
1
A port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
A port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
OBJECTS:
s5EnPortPartStatus
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrPortDteJabbering
102410
5
1
An ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
An ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
OBJECTS:
s5EnPortJabberStatus
1.3.6.1.4.1.45.1.6.2.1.1A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
s5EnPortPartStatus
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrPortAutoPart
0
s5EnPortPartStatus
1
0
s5EnPortJabberStatus
2
1.3.6.1.4.1.45.1.6.2.1.0.3This trap is sent when the mac-security address table
is cleared for all ports.
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacTableCleared
1.3.6.1.4.1.45.1.6.2.1.6This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
s5SbsMgmViolationType
s5SbsMgmViolationIpAddress
SNMP_TRAPS_BAYSTACK_s5EtrMgmAccessViolation
0
s5SbsMgmViolationType
1
0
s5SbsMgmViolationIpAddress
2
1.3.6.1.4.1.45.1.6.2.1.0.2This trap is sent when the mac-security address table
is cleared for a particular port.
s5SbsViolationStatusBrdIndx
s5SbsViolationStatusPortIndx
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacTableClearedForPort
0
s5SbsViolationStatusBrdIndx
1
0
s5SbsViolationStatusPortIndx
2
1.3.6.1.4.1.45.1.6.2.1.0.1This trap is sent when the mac-security address table
is filled.
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacTableFull
1.3.6.1.4.1.45.1.6.2.1.5This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
this violation
s5SbsViolationStatusBrdIndx
s5SbsViolationStatusPortIndx
s5SbsViolationStatusMACAddress
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacAccessViolation
0
s5SbsViolationStatusBrdIndx
1
0
s5SbsViolationStatusPortIndx
2
0
s5SbsViolationStatusMACAddress
3
1.3.6.1.4.1.45.1.6.2.1.3A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault.
s5EnRedPortOperStatus
s5EnRedPortCompanionBrdNum
s5EnRedPortCompanionPortNum
s5EnPortPartStatus
s5EnPortLinkStatus
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrRedPortFailure
0
s5EnRedPortOperStatus
1
0
s5EnRedPortCompanionBrdNum
2
0
s5EnRedPortCompanionPortNum
3
0
s5EnPortPartStatus
4
0
s5EnPortLinkStatus
5
0
s5EnPortJabberStatus
6
1.3.6.1.4.1.45.1.6.2.1.4This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port.
s5EnRedPortRemoteOperStatus
s5EnRedPortRedundMode
SNMP_TRAPS_BAYSTACK_s5EtrRedBadRemCfgDetected
0
s5EnRedPortRemoteOperStatus
1
0
s5EnRedPortRedundMode
2
1.3.6.1.4.1.45.1.6.2.1.0.4This trap is sent when a mac address is removed from the
mac-security address table.
s5SbsViolationStatusBrdIndx
s5SbsViolationStatusPortIndx
s5SbsViolationStatusMACAddress
SNMP_TRAPS_BAYSTACK_s5EtrSbsMacRemoved
0
s5SbsViolationStatusBrdIndx
1
0
s5SbsViolationStatusPortIndx
2
0
s5SbsViolationStatusMACAddress
3
1.3.6.1.4.1.45.1.6.2.1.7A port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
s5EnPortPartStatus
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrPortManualPart
0
s5EnPortPartStatus
1
0
s5EnPortJabberStatus
2
1.3.6.1.4.1.45.1.6.2.1.2An ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
s5EnPortJabberStatus
SNMP_TRAPS_BAYSTACK_s5EtrPortDteJabbering
0
s5EnPortJabberStatus
1