Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Carl Green]

Is there any plans to support SMTP Authentication?
TLS over 587 for example.

[Alex Kirhenshtein]

Not at the moment - there are multiple ways to configure is using existing tools:
* on most UNIXes you can use existing MTA (Postfix, Exim, Sendmail, e.t.c.) to use smarthost over TLS.
* For Windows there is http://emailrelay.sourceforge.net/ (I recommend version 1.9)

[Carl Green]

thanks will check it out.

[Staj]

Some easy instructions for running EmailRelay 2.0.0 on 127.0.0.1:25 on Windows with an upstream SMTPS server.

• This configuration is for SMTPS and which uses publicly trusted TLS certificates that need to be verified.
• Assumes one is using SMTPS on port 465, change smtp.example.com to your desired SMTPS server.

1) Extract emailrelay-2.0-w64 into C:\NetXMS\emailrelay on the same system as the NetXMS server, change paths to suit your own environment
2) Create spool directory: C:\NetXMS\emailrelay\spool
3) Create config directory: C:\NetXMS\emailrelay\config
4) Place a Trusted CA Certificate bundle into C:\NetXMS\emailrelay\config\cacert.pem (Eg: From Mozilla or curl for public CAs or you'll need to make your own if your SMTPS server uses certificates signed by an internal CA)

5) Create C:\NetXMS\emailrelay\config\email.auth and put in any relevant authentication
Example:

Code: [Select]

client plain netxms@example.com PasswordHere

6) Create batch file to start emailrelay.exe: C:\NetXMS\emailrelay\start-emailrelay.bat

Code: [Select]

start "emailrelay" "C:\NetXMS\emailrelay\emailrelay.exe" --interface=127.0.0.1 --interface=127.0.0.1 --port=25 --as-proxy=smtp.example.com:465 --client-auth=C:\NetXMS\emailrelay\config\email.auth --client-tls-connection --client-tls-required  --client-tls-server-name=smtp.example.com --client-tls-verify=C:\NetXMS\emailrelay\config\cacert.pem --spool-dir=C:\NetXMS\emailrelay\spool --pid-file=C:\NetXMS\emailrelay\emailrelay.pid --no-syslogChange smtp.example.com to your desired SMTPS server.

7) Create C:\NetXMS\emailrelay\emailrelay-service.cfg

Code: [Select]

dir-config="C:\NetXMS\emailrelay\config"
8 ) Run as Administrator to install service:

Code: [Select]

C:\NetXMS\emailrelay\emailrelay-service --install
Remember to document the existence of the cacert.pem bundle and the need to manually update it.