Print Page - Strange interface counting and port view

Title: Strange interface counting and port view
Post by: hbc on January 16, 2019, 10:43:39 AM

Hello,

I have some modulare HP 5412 switches. The component view looks pretty good. Several modules as container and ports from Letter 1-24 (A1-A24, B1-B24,...).
The interface names in interface view are also right, even the ifIndex is incrementing correctly (A1=1, A24=24, B1=25, B24=48), BUT the port number is wrong.

A1=1, A23=23, A24=0, B1=1, B23=23, B24=0

This leads to display errors in port view. Sometime even one port (24) is missing per module and most modules start with port 0 instead of 1.

For further info watch the screenshots.

Title: Re: Strange interface counting and port view
Post by: Victor Kirhenshtein on January 29, 2019, 04:56:46 PM

Hi,

what is device OID and what driver is selected? If it is PROCURVE, please check if node has custom attributes .procurve.isModular and .procurve.slotSize.

Best regards,
Victor

Title: Re: Strange interface counting and port view
Post by: Victor Kirhenshtein on January 31, 2019, 03:11:38 PM

Update: I likely found the reason for this error in numbering. Next release should show it correctly.

Best regards,
Victor

NetXMS Support Forum

English Support => General Support => Topic started by: hbc on January 16, 2019, 10:43:39 AM