Strange interface counting and port view

Started by hbc, January 16, 2019, 10:43:39 AM

Previous topic - Next topic

hbc

Hello,

I have some modulare HP 5412 switches. The component view looks pretty good. Several modules as container and ports from Letter 1-24 (A1-A24, B1-B24,...).
The interface names in interface view are also right, even the ifIndex is incrementing correctly (A1=1, A24=24, B1=25, B24=48), BUT the port number is wrong.

A1=1, A23=23, A24=0, B1=1, B23=23, B24=0

This leads to display errors in port view. Sometime even one port (24) is missing per module and most modules start with port 0 instead of 1.

For further info watch the screenshots.

Victor Kirhenshtein

Hi,

what is device OID and what driver is selected? If it is PROCURVE, please check if node has custom attributes .procurve.isModular and .procurve.slotSize.

Best regards,
Victor

Victor Kirhenshtein

Update: I likely found the reason for this error in numbering. Next release should show it correctly.

Best regards,
Victor