DISMAN-PING-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, Integer32,
   Unsigned32, Gauge32, mib-2,
   NOTIFICATION-TYPE, OBJECT-IDENTITY
       FROM SNMPv2-SMI                  -- RFC2578
   TEXTUAL-CONVENTION, RowStatus,
   StorageType, DateAndTime, TruthValue
       FROM SNMPv2-TC                   -- RFC2579
   MODULE-COMPLIANCE, OBJECT-GROUP,
   NOTIFICATION-GROUP
       FROM SNMPv2-CONF                 -- RFC2580
   InterfaceIndexOrZero                 -- RFC2863
       FROM IF-MIB
   SnmpAdminString
       FROM SNMP-FRAMEWORK-MIB          -- RFC3411
   InetAddressType, InetAddress
       FROM INET-ADDRESS-MIB;           -- RFC4001

pingMIB MODULE-IDENTITY
   LAST-UPDATED "200606130000Z"         -- 13 June 2006
   ORGANIZATION "IETF Distributed Management Working Group"
   CONTACT-INFO
       "Juergen Quittek

       NEC Europe Ltd.
       Network Laboratories
       Kurfuersten-Anlage 36
       69115 Heidelberg
       Germany

       Phone: +49 6221 4342-115
       Email: quittek@netlab.nec.de"
   DESCRIPTION
       "The Ping MIB (DISMAN-PING-MIB) provides the capability of
       controlling the use of the ping function at a remote
       host.

       Copyright (C) The Internet Society (2006).  This version of
       this MIB module is part of RFC 4560; see the RFC itself for
       full legal notices."

    --  Revision history

    REVISION     "200606130000Z"         -- 13 June 2006
    DESCRIPTION
        "Updated version, published as RFC 4560.
            - Correctly considered IPv6 in DESCRIPTION
              clause of pingCtlDataSize
            - Replaced references to RFC 2575 by RFC 3415
            - Replaced references to RFC 2571 by RFC 3411
            - Replaced references to RFC 2851 by RFC 4001
            - Added DEFVAL { {} } to definition of
              pingCtlTrapGeneration
            - Changed DEFVAL of object pingCtlDescr from
              DEFVAL { '00'H } to DEFVAL { ''H }
            - Changed DEFVAL of object pingCtlSourceAddressType
              from DEFVAL { ipv4 } to DEFVAL { unknown }
            - Extended DESCRIPTION clause of pingResultsTable
              describing re-initialization of entries
            - Changed SYNTAX of pingResultsProbeResponses and
              pingResultsSentProbes from Unsigned32 to Gauge32
            - Changed status of pingCompliance to deprecated
            - Added pingFullCompliance and pingMinimumCompliance
            - Changed status of pingGroup and pingTimeStampGroup
              to deprecated
            - Added pingMinimumGroup, pingCtlRowStatusGroup,
              and pingHistoryGroup"

    REVISION     "200009210000Z"         -- 21 September 2000
    DESCRIPTION
        "Initial version, published as RFC 2925."

   ::= { mib-2 80 }

-- Textual Conventions

 OperationResponseStatus ::= TEXTUAL-CONVENTION
   STATUS  current
   DESCRIPTION
       "Used to report the result of an operation:

        responseReceived(1) - Operation is completed successfully.
        unknown(2) - Operation failed due to unknown error.
        internalError(3) - An implementation detected an error
             in its own processing that caused an operation
             to fail.
        requestTimedOut(4) - Operation failed to receive a
             valid reply within the time limit imposed on it.
        unknownDestinationAddress(5) - Invalid destination
             address.
        noRouteToTarget(6) - Could not find a route to target.
        interfaceInactiveToTarget(7) - The interface to be
             used in sending a probe is inactive, and an
             alternate route does not exist.
        arpFailure(8) - Unable to resolve a target address to a
             media-specific address.
        maxConcurrentLimitReached(9) - The maximum number of
             concurrent active operations would have been exceeded
             if the corresponding operation was allowed.
        unableToResolveDnsName(10) - The DNS name specified was
             unable to be mapped to an IP address.
        invalidHostAddress(11) - The IP address for a host
             has been determined to be invalid.  Examples of this
             are broadcast or multicast addresses."
   SYNTAX INTEGER {
                responseReceived(1),
                unknown(2),
                internalError(3),
                requestTimedOut(4),
                unknownDestinationAddress(5),
                noRouteToTarget(6),
                interfaceInactiveToTarget(7),
                arpFailure(8),
                maxConcurrentLimitReached(9),
                unableToResolveDnsName(10),
                invalidHostAddress(11)
             }

-- Top level structure of the MIB

pingNotifications              OBJECT IDENTIFIER ::= { pingMIB 0 }
pingObjects                    OBJECT IDENTIFIER ::= { pingMIB 1 }
pingConformance                OBJECT IDENTIFIER ::= { pingMIB 2 }


-- The registration node (point) for ping implementation types
pingImplementationTypeDomains  OBJECT IDENTIFIER ::= { pingMIB 3 }

pingIcmpEcho OBJECT-IDENTITY
   STATUS      current
   DESCRIPTION
       "Indicates that an implementation is using the Internet
       Control Message Protocol (ICMP) 'ECHO' facility."
   ::= { pingImplementationTypeDomains 1 }

pingUdpEcho OBJECT-IDENTITY
   STATUS      current
   DESCRIPTION
       "Indicates that an implementation is using the UDP echo
       port (7)."

   REFERENCE
       "RFC 862, 'Echo Protocol'."
   ::= { pingImplementationTypeDomains 2 }

pingSnmpQuery OBJECT-IDENTITY
   STATUS      current
   DESCRIPTION
       "Indicates that an implementation is using an SNMP query
        to calculate a round trip time."
   ::= { pingImplementationTypeDomains 3 }

pingTcpConnectionAttempt OBJECT-IDENTITY
   STATUS      current
   DESCRIPTION
       "Indicates that an implementation is attempting to
       connect to a TCP port in order to calculate a round
       trip time."
   ::= { pingImplementationTypeDomains 4 }


-- Simple Object Definitions

pingMaxConcurrentRequests OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "requests"
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "The maximum number of concurrent active ping requests
      that are allowed within an agent implementation.  A value
      of 0 for this object implies that there is no limit for
      the number of concurrent active requests in effect.
      The limit applies only to new requests being activated.
      When a new value is set, the agent will continue processing
      all the requests already active, even if their number
      exceeds the limit just imposed."
   DEFVAL { 10 }
   ::= { pingObjects 1 }

-- Ping Control Table

pingCtlTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF PingCtlEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Defines the ping Control Table for providing, via SNMP,
       the capability of performing ping operations at
       a remote host.  The results of these operations are
       stored in the pingResultsTable and the
       pingProbeHistoryTable."
  ::= { pingObjects 2 }

pingCtlEntry OBJECT-TYPE
   SYNTAX      PingCtlEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Defines an entry in the pingCtlTable.  The first index
       element, pingCtlOwnerIndex, is of type SnmpAdminString,
       a textual convention that allows for use of the SNMPv3
       View-Based Access Control Model (RFC 3415, VACM)
       and that allows a management application to identify its
       entries.  The second index, pingCtlTestName (also an
       SnmpAdminString), enables the same management
       application to have multiple outstanding requests."
   INDEX {
            pingCtlOwnerIndex,
            pingCtlTestName
         }
   ::= { pingCtlTable 1 }

PingCtlEntry ::=
   SEQUENCE {
       pingCtlOwnerIndex             SnmpAdminString,
       pingCtlTestName               SnmpAdminString,
       pingCtlTargetAddressType      InetAddressType,
       pingCtlTargetAddress          InetAddress,
       pingCtlDataSize               Unsigned32,
       pingCtlTimeOut                Unsigned32,
       pingCtlProbeCount             Unsigned32,
       pingCtlAdminStatus            INTEGER,
       pingCtlDataFill               OCTET STRING,
       pingCtlFrequency              Unsigned32,
       pingCtlMaxRows                Unsigned32,
       pingCtlStorageType            StorageType,
       pingCtlTrapGeneration         BITS,
       pingCtlTrapProbeFailureFilter Unsigned32,
       pingCtlTrapTestFailureFilter  Unsigned32,
       pingCtlType                   OBJECT IDENTIFIER,
       pingCtlDescr                  SnmpAdminString,
       pingCtlSourceAddressType      InetAddressType,
       pingCtlSourceAddress          InetAddress,
       pingCtlIfIndex                InterfaceIndexOrZero,
       pingCtlByPassRouteTable       TruthValue,
       pingCtlDSField                Unsigned32,
       pingCtlRowStatus              RowStatus
   }

pingCtlOwnerIndex OBJECT-TYPE
   SYNTAX      SnmpAdminString (SIZE(0..32))
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
      "To facilitate the provisioning of access control by a
      security administrator using the View-Based Access
      Control Model (RFC 2575, VACM) for tables in which
      multiple users may need to create or
      modify entries independently, the initial index is used
      as an 'owner index'.  Such an initial index has a syntax
      of SnmpAdminString and can thus be trivially mapped to a
      securityName or groupName defined in VACM, in
      accordance with a security policy.

      When used in conjunction with such a security policy, all
      entries in the table belonging to a particular user (or
      group) will have the same value for this initial index.
      For a given user's entries in a particular table, the
      object identifiers for the information in these entries
      will have the same subidentifiers (except for the 'column'
      subidentifier) up to the end of the encoded owner index.
      To configure VACM to permit access to this portion of the
      table, one would create vacmViewTreeFamilyTable entries
      with the value of vacmViewTreeFamilySubtree including
      the owner index portion, and vacmViewTreeFamilyMask
      'wildcarding' the column subidentifier.  More elaborate
      configurations are possible."
   ::= { pingCtlEntry 1 }

pingCtlTestName OBJECT-TYPE
   SYNTAX      SnmpAdminString (SIZE(0..32))
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "The name of the ping test.  This is locally unique, within
       the scope of a pingCtlOwnerIndex."
   ::= { pingCtlEntry 2 }

pingCtlTargetAddressType OBJECT-TYPE
   SYNTAX      InetAddressType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the type of host address to be used at a remote
       host for performing a ping operation."
   DEFVAL { unknown }
   ::= { pingCtlEntry 3 }

pingCtlTargetAddress OBJECT-TYPE

   SYNTAX      InetAddress
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the host address to be used at a remote host for
       performing a ping operation.  The host address type is
       determined by the value of the corresponding
       pingCtlTargetAddressType.

       A value for this object MUST be set prior to transitioning
       its corresponding pingCtlEntry to active(1) via
       pingCtlRowStatus."
   DEFVAL { ''H }
   ::= { pingCtlEntry 4 }

pingCtlDataSize OBJECT-TYPE
   SYNTAX      Unsigned32 (0..65507)
   UNITS       "octets"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the size of the data portion to be
       transmitted in a ping operation, in octets.  Whether this
       value can be applied depends on the selected
       implementation method for performing a ping operation,
       indicated by pingCtlType in the same conceptual row.
       If the method used allows applying the value contained
       in this object, then it MUST be applied.  If the specified
       size is not appropriate for the chosen ping method, the
       implementation SHOULD use whatever size (appropriate to
       the method) is closest to the specified size.

       The maximum value for this object was computed by
       subtracting the smallest possible IP header size of
       20 octets (IPv4 header with no options) and the UDP
       header size of 8 octets from the maximum IP packet size.
       An IP packet has a maximum size of 65535 octets
       (excluding IPv6 Jumbograms)."
   DEFVAL { 0 }
   ::= { pingCtlEntry 5 }

pingCtlTimeOut OBJECT-TYPE
   SYNTAX      Unsigned32 (1..60)
   UNITS       "seconds"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the time-out value, in seconds, for a
       remote ping operation."
   DEFVAL { 3 }

   ::= { pingCtlEntry 6 }

pingCtlProbeCount OBJECT-TYPE
   SYNTAX      Unsigned32 (1..15)
   UNITS       "probes"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the number of times to perform a ping
       operation at a remote host as part of a single ping test."
   DEFVAL { 1 }
   ::= { pingCtlEntry 7 }

pingCtlAdminStatus OBJECT-TYPE
   SYNTAX      INTEGER {
                         enabled(1), -- test should be started
                         disabled(2) -- test should be stopped
                       }
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Reflects the desired state that a pingCtlEntry should be
       in:
          enabled(1)  - Attempt to activate the test as defined by
                        this pingCtlEntry.
          disabled(2) - Deactivate the test as defined by this
                        pingCtlEntry.

       Refer to the corresponding pingResultsOperStatus to
       determine the operational state of the test defined by
       this entry."
    DEFVAL { disabled }
   ::= { pingCtlEntry 8 }

pingCtlDataFill  OBJECT-TYPE
   SYNTAX      OCTET STRING (SIZE(0..1024))
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The content of this object is used together with the
       corresponding pingCtlDataSize value to determine how to
       fill the data portion of a probe packet.  The option of
       selecting a data fill pattern can be useful when links
       are compressed or have data pattern sensitivities.  The
       contents of pingCtlDataFill should be repeated in a ping
       packet when the size of the data portion of the ping
       packet is greater than the size of pingCtlDataFill."
   DEFVAL { '00'H }
   ::= { pingCtlEntry 9 }

pingCtlFrequency  OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "seconds"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The number of seconds to wait before repeating a ping test
       as defined by the value of the various objects in the
       corresponding row.

       A single ping test consists of a series of ping probes.
       The number of probes is determined by the value of the
       corresponding pingCtlProbeCount object.  After a single
       test is completed the number of seconds as defined by the
       value of pingCtlFrequency MUST elapse before the
       next ping test is started.

       A value of 0 for this object implies that the test
       as defined by the corresponding entry will not be
       repeated."
   DEFVAL { 0 }
   ::= { pingCtlEntry 10 }

pingCtlMaxRows OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "rows"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The maximum number of corresponding entries allowed
       in the pingProbeHistoryTable.  An implementation of this
       MIB will remove the oldest corresponding entry in the
       pingProbeHistoryTable to allow the addition of an
       new entry once the number of corresponding rows in the
       pingProbeHistoryTable reaches this value.

       Old entries are not removed when a new test is
       started.  Entries are added to the pingProbeHistoryTable
       until pingCtlMaxRows is reached before entries begin to
       be removed.

       A value of 0 for this object disables creation of
       pingProbeHistoryTable entries."
   DEFVAL      { 50 }
   ::= { pingCtlEntry 11 }

pingCtlStorageType OBJECT-TYPE
   SYNTAX      StorageType
   MAX-ACCESS  read-create
   STATUS      current

   DESCRIPTION
       "The storage type for this conceptual row.
       Conceptual rows having the value 'permanent' need not
       allow write-access to any columnar objects in the row."
   DEFVAL { nonVolatile }
   ::= { pingCtlEntry 12 }

pingCtlTrapGeneration OBJECT-TYPE
   SYNTAX      BITS {
                  probeFailure(0),
                  testFailure(1),
                  testCompletion(2)
                 }
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The value of this object determines when and whether
       to generate a notification for this entry:
       probeFailure(0)   - Generate a pingProbeFailed
           notification subject to the value of
           pingCtlTrapProbeFailureFilter.  The object
           pingCtlTrapProbeFailureFilter can be used
           to specify the number of consecutive probe
           failures that are required before a
           pingProbeFailed notification can be generated.
       testFailure(1)    - Generate a pingTestFailed
           notification.  In this instance the object
           pingCtlTrapTestFailureFilter can be used to
           determine the number of probe failures that
           signal when a test fails.
       testCompletion(2) - Generate a pingTestCompleted
           notification.

       By default, no bits are set, indicating that
       none of the above options is selected."
   DEFVAL { {} }  -- no bits set.
   ::= { pingCtlEntry 13 }

pingCtlTrapProbeFailureFilter OBJECT-TYPE
   SYNTAX      Unsigned32 (0..15)
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The value of this object is used to determine when
       to generate a pingProbeFailed NOTIFICATION.

       Setting BIT probeFailure(0) of object
       pingCtlTrapGeneration to '1' implies that a
       pingProbeFailed NOTIFICATION is generated only when

       a number of consecutive ping probes equal to the
       value of pingCtlTrapProbeFailureFilter fail within
       a given ping test.  After triggering the notification,
       the probe failure counter is reset to zero."
   DEFVAL { 1 }
   ::= { pingCtlEntry 14 }

pingCtlTrapTestFailureFilter OBJECT-TYPE
   SYNTAX      Unsigned32 (0..15)
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The value of this object is used to determine when
       to generate a pingTestFailed NOTIFICATION.

       Setting BIT testFailure(1) of object
       pingCtlTrapGeneration to '1' implies that a
       pingTestFailed NOTIFICATION is generated only when
       a number of consecutive ping tests equal to the
       value of pingCtlTrapProbeFailureFilter fail.
       After triggering the notification, the test failure
       counter is reset to zero."
   DEFVAL { 1 }
   ::= { pingCtlEntry 15 }

pingCtlType OBJECT-TYPE
   SYNTAX      OBJECT IDENTIFIER
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The value of this object is used either to report or
       to select the implementation method to be used for
       calculating a ping response time.  The value of this
       object MAY be selected from pingImplementationTypeDomains.

       Additional implementation types SHOULD be allocated as
       required by implementers of the DISMAN-PING-MIB under
       their enterprise-specific registration point and not
       beneath pingImplementationTypeDomains."
   DEFVAL { pingIcmpEcho }
   ::= { pingCtlEntry 16 }

pingCtlDescr OBJECT-TYPE
   SYNTAX      SnmpAdminString
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The purpose of this object is to provide a
       descriptive name of the remote ping test."
   DEFVAL { ''H }

   ::= { pingCtlEntry 17 }

pingCtlSourceAddressType OBJECT-TYPE
   SYNTAX      InetAddressType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the type of the source address,
       pingCtlSourceAddress, to be used at a remote host
       when a ping operation is performed."
   DEFVAL { unknown }
   ::= { pingCtlEntry 18 }

 pingCtlSourceAddress OBJECT-TYPE
   SYNTAX      InetAddress
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Use the specified IP address (which must be given in
       numeric form, not as a hostname) as the source address
       in outgoing probe packets.  On hosts with more than one
       IP address, this option can be used to select the address
       to be used.  If the IP address is not one of this
       machine's interface addresses, an error is returned and
       nothing is sent.  A zero-length octet string value for
       this object disables source address specification.

       The address type (InetAddressType) that relates to
       this object is specified by the corresponding value
       of pingCtlSourceAddressType."
   DEFVAL { ''H }
   ::= { pingCtlEntry 19 }

pingCtlIfIndex OBJECT-TYPE
   SYNTAX      InterfaceIndexOrZero
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Setting this object to an interface's ifIndex prior
       to starting a remote ping operation directs
       the ping probes to be transmitted over the
       specified interface.  A value of zero for this object
       means that this option is not enabled."
   DEFVAL { 0 }
   ::= { pingCtlEntry 20 }

pingCtlByPassRouteTable OBJECT-TYPE
   SYNTAX      TruthValue
   MAX-ACCESS  read-create
   STATUS      current

   DESCRIPTION
      "The purpose of this object is to enable optional
      bypassing the route table.  If enabled, the remote
      host will bypass the normal routing tables and send
      directly to a host on an attached network.  If the
      host is not on a directly attached network, an
      error is returned.  This option can be used to perform
      the ping operation to a local host through an
      interface that has no route defined (e.g., after the
      interface was dropped by the routing daemon at the host)."
   DEFVAL { false }
   ::= { pingCtlEntry 21 }

pingCtlDSField OBJECT-TYPE
   SYNTAX      Unsigned32 (0..255)
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "Specifies the value to store in the Type of Service
       (TOS) octet in the IPv4 header or in the Traffic
       Class octet in the IPv6 header, respectively, of the
       IP packet used to encapsulate the ping probe.

       The octet to be set in the IP header contains the
       Differentiated Services (DS) Field in the six most
       significant bits.

       This option can be used to determine what effect an
       explicit DS Field setting has on a ping response.
       Not all values are legal or meaningful.  A value of 0
       means that the function represented by this option is
       not supported.  DS Field usage is often not supported
       by IP implementations, and not all values are supported.
       Refer to RFC 2474 and RFC 3260 for guidance on usage of
       this field."
   REFERENCE
       "Refer to RFC 1812 for the definition of the IPv4 TOS
       octet and to RFC 2460 for the definition of the IPv6
       Traffic Class octet.  Refer to RFC 2474 and RFC 3260
       for the definition of the Differentiated Services Field."
   DEFVAL { 0 }
   ::= { pingCtlEntry 22 }

pingCtlRowStatus OBJECT-TYPE
   SYNTAX      RowStatus
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "This object allows entries to be created and deleted
       in the pingCtlTable.  Deletion of an entry in this
       table results in the deletion of all corresponding (same
       pingCtlOwnerIndex and pingCtlTestName index values)
       pingResultsTable and pingProbeHistoryTable entries.

       A value MUST be specified for pingCtlTargetAddress
       prior to acceptance of a transition to active(1) state.

       When a value for pingCtlTargetAddress is set,
       the value of object pingCtlRowStatus changes
       from notReady(3) to notInService(2).

       Activation of a remote ping operation is controlled
       via pingCtlAdminStatus, not by changing
       this object's value to active(1).

       Transitions in and out of active(1) state are not
       allowed while an entry's pingResultsOperStatus is
       active(1), with the exception that deletion of
       an entry in this table by setting its RowStatus
       object to destroy(6) will stop an active
       ping operation.

       The operational state of a ping operation
       can be determined by examination of its
       pingResultsOperStatus object."
   REFERENCE
       "See definition of RowStatus in RFC 2579, 'Textual
       Conventions for SMIv2.'"
   ::= { pingCtlEntry 23 }

-- Ping Results Table

pingResultsTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF PingResultsEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Defines the Ping Results Table for providing
       the capability of performing ping operations at
       a remote host.  The results of these operations are
       stored in the pingResultsTable and the pingProbeHistoryTable.

       An entry is added to the pingResultsTable when an
       pingCtlEntry is started by successful transition
       of its pingCtlAdminStatus object to enabled(1).

       If the object pingCtlAdminStatus already has the value
       enabled(1), and if the corresponding pingResultsOperStatus
       object has the value completed(3), then successfully writing
       enabled(1) to object pingCtlAdminStatus re-initializes the
       already existing entry in the pingResultsTable.  The values
       of objects in the re-initialized entry are the same as the
       values of objects in a new entry would be.

       An entry is removed from the pingResultsTable when
       its corresponding pingCtlEntry is deleted."
  ::= { pingObjects 3 }

pingResultsEntry OBJECT-TYPE
   SYNTAX      PingResultsEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Defines an entry in the pingResultsTable.  The
       pingResultsTable has the same indexing as the
       pingCtlTable so that a pingResultsEntry
       corresponds to the pingCtlEntry that caused it to
       be created."
   INDEX {
            pingCtlOwnerIndex,
            pingCtlTestName
         }
   ::= { pingResultsTable 1 }

PingResultsEntry ::=
   SEQUENCE {
       pingResultsOperStatus          INTEGER,
       pingResultsIpTargetAddressType InetAddressType,
       pingResultsIpTargetAddress     InetAddress,
       pingResultsMinRtt              Unsigned32,
       pingResultsMaxRtt              Unsigned32,
       pingResultsAverageRtt          Unsigned32,
       pingResultsProbeResponses      Gauge32,
       pingResultsSentProbes          Gauge32,
       pingResultsRttSumOfSquares     Unsigned32,
       pingResultsLastGoodProbe       DateAndTime
    }

pingResultsOperStatus OBJECT-TYPE
   SYNTAX      INTEGER {
                         enabled(1),   -- test is in progress
                         disabled(2),  -- test has stopped
                         completed(3)  -- test is completed
                       }
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Reflects the operational state of a pingCtlEntry:

          enabled(1)    - Test is active.
          disabled(2)   - Test has stopped.
          completed(3)  - Test is completed."
   ::= { pingResultsEntry 1 }

pingResultsIpTargetAddressType OBJECT-TYPE
   SYNTAX      InetAddressType
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "This object indicates the type of address stored
       in the corresponding pingResultsIpTargetAddress
       object."
   DEFVAL { unknown }
   ::= { pingResultsEntry 2 }

pingResultsIpTargetAddress OBJECT-TYPE
   SYNTAX      InetAddress
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "This object reports the IP address associated
       with a pingCtlTargetAddress value when the destination
       address is specified as a DNS name.  The value of
       this object should be a zero-length octet string
       when a DNS name is not specified or when a
       specified DNS name fails to resolve.

       The address type (InetAddressType) that relates to
       this object is specified by the corresponding value
       of pingResultsIpTargetAddressType."
   DEFVAL { ''H }
   ::= { pingResultsEntry 3 }

pingResultsMinRtt OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "milliseconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The minimum ping round-trip-time (RTT) received.  A value
       of 0 for this object implies that no RTT has been received."
   ::= { pingResultsEntry 4 }

pingResultsMaxRtt OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "milliseconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The maximum ping round-trip-time (RTT) received.  A value
       of 0 for this object implies that no RTT has been received."
   ::= { pingResultsEntry 5 }

 pingResultsAverageRtt OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "milliseconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The current average ping round-trip-time (RTT)."
   ::= { pingResultsEntry 6 }

 pingResultsProbeResponses OBJECT-TYPE
   SYNTAX      Gauge32
   UNITS       "responses"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of responses received for the corresponding
       pingCtlEntry and pingResultsEntry.  The value of this object
       MUST be reported as 0 when no probe responses have been
       received."
   ::= { pingResultsEntry 7 }

 pingResultsSentProbes OBJECT-TYPE
   SYNTAX      Gauge32
   UNITS       "probes"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The value of this object reflects the number of probes sent
       for the corresponding pingCtlEntry and pingResultsEntry.
       The value of this object MUST be reported as 0 when no probes
       have been sent."
   ::= { pingResultsEntry 8 }

 pingResultsRttSumOfSquares OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "milliseconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "This object contains the sum of the squares for all ping
       responses received.  Its purpose is to enable standard
       deviation calculation.  The value of this object MUST
       be reported as 0 when no ping responses have been
       received."
   ::= { pingResultsEntry 9 }

pingResultsLastGoodProbe OBJECT-TYPE
   SYNTAX      DateAndTime
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Date and time when the last response was received for
       a probe."
   ::= { pingResultsEntry 10 }

-- Ping Probe History Table

pingProbeHistoryTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF PingProbeHistoryEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Defines a table for storing the results of ping
       operations.  The number of entries in this table is
       limited per entry in the pingCtlTable by the value
       of the corresponding pingCtlMaxRows object.

       An entry in this table is created when the result of
       a ping probe is determined.  The initial 2 instance
       identifier index values identify the pingCtlEntry
       that a probe result (pingProbeHistoryEntry) belongs
       to.  An entry is removed from this table when
       its corresponding pingCtlEntry is deleted.

       An implementation of this MIB will remove the oldest
       entry in the pingProbeHistoryTable of the
       corresponding entry in the pingCtlTable to allow
       the addition of an new entry once the number of rows
       in the pingProbeHistoryTable reaches the value
       specified by pingCtlMaxRows for the corresponding
       entry in the pingCtlTable."
  ::= { pingObjects 4 }

pingProbeHistoryEntry OBJECT-TYPE
   SYNTAX      PingProbeHistoryEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Defines an entry in the pingProbeHistoryTable.
       The first two index elements identify the
       pingCtlEntry that a pingProbeHistoryEntry belongs
       to.  The third index element selects a single
       probe result."
   INDEX {
            pingCtlOwnerIndex,
            pingCtlTestName,
            pingProbeHistoryIndex
          }
   ::= { pingProbeHistoryTable 1 }

PingProbeHistoryEntry ::=
   SEQUENCE {
       pingProbeHistoryIndex         Unsigned32,
       pingProbeHistoryResponse      Unsigned32,
       pingProbeHistoryStatus        OperationResponseStatus,
       pingProbeHistoryLastRC        Integer32,
       pingProbeHistoryTime          DateAndTime
   }

pingProbeHistoryIndex OBJECT-TYPE
   SYNTAX      Unsigned32 (1..'ffffffff'h)
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "An entry in this table is created when the result of
       a ping probe is determined.  The initial 2 instance
       identifier index values identify the pingCtlEntry
       that a probe result (pingProbeHistoryEntry) belongs
       to.

       An implementation MUST start assigning
       pingProbeHistoryIndex values at 1 and wrap after
       exceeding the maximum possible value as defined by
       the limit of this object ('ffffffff'h)."
   ::= { pingProbeHistoryEntry 1 }

pingProbeHistoryResponse OBJECT-TYPE
   SYNTAX      Unsigned32
   UNITS       "milliseconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The amount of time measured in milliseconds from when
       a probe was sent to when its response was received or
       when it timed out.  The value of this object is reported
       as 0 when it is not possible to transmit a probe."
   ::= { pingProbeHistoryEntry 2 }

pingProbeHistoryStatus OBJECT-TYPE
   SYNTAX      OperationResponseStatus
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The result of a particular probe done by a remote host."
   ::= { pingProbeHistoryEntry 3 }

pingProbeHistoryLastRC        OBJECT-TYPE
   SYNTAX      Integer32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The last implementation-method-specific reply code received.
       If the ICMP Echo capability is being used, then a successful
       probe ends when an ICMP response is received that contains
       the code ICMP_ECHOREPLY(0).  The ICMP codes are maintained
       by IANA.  Standardized ICMP codes are listed at
       http://www.iana.org/assignments/icmp-parameters.
       The ICMPv6 codes are listed at
       http://www.iana.org/assignments/icmpv6-parameters."
   ::= { pingProbeHistoryEntry 4 }

pingProbeHistoryTime OBJECT-TYPE
   SYNTAX      DateAndTime
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Timestamp for when this probe result was determined."
   ::= { pingProbeHistoryEntry 5 }


-- Notification Definition section

pingProbeFailed NOTIFICATION-TYPE
     OBJECTS {
       pingCtlTargetAddressType,
       pingCtlTargetAddress,
       pingResultsOperStatus,
       pingResultsIpTargetAddressType,
       pingResultsIpTargetAddress,
       pingResultsMinRtt,
       pingResultsMaxRtt,
       pingResultsAverageRtt,
       pingResultsProbeResponses,
       pingResultsSentProbes,
       pingResultsRttSumOfSquares,
       pingResultsLastGoodProbe
     }
     STATUS  current
     DESCRIPTION
         "Generated when a probe failure is detected, when the
         corresponding pingCtlTrapGeneration object is set to
         probeFailure(0), subject to the value of
         pingCtlTrapProbeFailureFilter.  The object
         pingCtlTrapProbeFailureFilter can be used to specify the
         number of consecutive probe failures that are required
         before this notification can be generated."

     ::= { pingNotifications 1 }

pingTestFailed NOTIFICATION-TYPE
     OBJECTS {
       pingCtlTargetAddressType,
       pingCtlTargetAddress,
       pingResultsOperStatus,
       pingResultsIpTargetAddressType,
       pingResultsIpTargetAddress,
       pingResultsMinRtt,
       pingResultsMaxRtt,
       pingResultsAverageRtt,
       pingResultsProbeResponses,
       pingResultsSentProbes,
       pingResultsRttSumOfSquares,
       pingResultsLastGoodProbe
     }
     STATUS  current
     DESCRIPTION
         "Generated when a ping test is determined to have failed,
         when the corresponding pingCtlTrapGeneration object is
         set to testFailure(1).  In this instance,
         pingCtlTrapTestFailureFilter should specify the number of
         probes in a test required to have failed in order to
         consider the test failed."
     ::= { pingNotifications 2 }

pingTestCompleted NOTIFICATION-TYPE
     OBJECTS {
       pingCtlTargetAddressType,
       pingCtlTargetAddress,
       pingResultsOperStatus,
       pingResultsIpTargetAddressType,
       pingResultsIpTargetAddress,
       pingResultsMinRtt,
       pingResultsMaxRtt,
       pingResultsAverageRtt,
       pingResultsProbeResponses,
       pingResultsSentProbes,
       pingResultsRttSumOfSquares,
       pingResultsLastGoodProbe
     }
     STATUS  current
     DESCRIPTION
         "Generated at the completion of a ping test when the
         corresponding pingCtlTrapGeneration object has the
         testCompletion(2) bit set."
     ::= { pingNotifications 3 }

-- Conformance information

-- Compliance statements

pingCompliances OBJECT IDENTIFIER ::= { pingConformance 1 }
pingGroups      OBJECT IDENTIFIER ::= { pingConformance 2 }

-- Compliance statements

pingFullCompliance MODULE-COMPLIANCE
   STATUS  current
   DESCRIPTION
           "The compliance statement for SNMP entities that
           fully implement the DISMAN-PING-MIB."
   MODULE  -- this module
       MANDATORY-GROUPS {
                           pingMinimumGroup,
                           pingCtlRowStatusGroup,
                           pingHistoryGroup,
                           pingNotificationsGroup
                         }

       OBJECT pingMaxConcurrentRequests
       MIN-ACCESS  read-only
       DESCRIPTION
           "The agent is not required to support set
           operations to this object."

       OBJECT pingCtlStorageType
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required."

       OBJECT pingCtlType
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  In addition, the only
           value that MUST be supported by an implementation is
           pingIcmpEcho."
       OBJECT pingCtlSourceAddressType
       SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access to this object is not required by
           implementations that are not capable of binding the
           send socket with a source address.  An implementation
           is only required to support IPv4 and IPv6 addresses."

       OBJECT pingCtlSourceAddress
       SYNTAX  InetAddress (SIZE(0|4|16))
       MIN-ACCESS  read-only

       DESCRIPTION
           "Write access to this object is not required by
           implementations that are not capable of binding the
           send socket with a source address.  An implementation
           is only required to support IPv4 and IPv6 addresses."

       OBJECT pingCtlIfIndex
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingCtlByPassRouteTable
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access to this object is not required by
           implementations that are not capable of its
           implementation.  The function represented by this
           object is implementable if the setsockopt
           SOL_SOCKET SO_DONTROUTE option is supported."

       OBJECT pingCtlDSField
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingResultsIpTargetAddressType
       SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
       DESCRIPTION
           "An implementation is only required to
           support IPv4 and IPv6 addresses."

       OBJECT pingResultsIpTargetAddress
       SYNTAX  InetAddress (SIZE(0|4|16))
       DESCRIPTION
           "An implementation is only required to
           support IPv4 and globally unique IPv6 addresses."

       OBJECT pingResultsLastGoodProbe
       DESCRIPTION
           "This object is mandatory for implementations that have
           access to a system clock and that are capable of setting
           the values for DateAndTime objects.  It is RECOMMENDED
           that when this object is not supported its values
           be reported as '0000000000000000'H."

       OBJECT pingProbeHistoryTime
       DESCRIPTION
           "This object is mandatory for implementations that have
           access to a system clock and that are capable of setting
           the values for DateAndTime objects.  It is RECOMMENDED
           that when this object is not supported its values
           be reported as '0000000000000000'H."
   ::= { pingCompliances 2 }

pingMinimumCompliance MODULE-COMPLIANCE
   STATUS  current
   DESCRIPTION
           "The minimum compliance statement for SNMP entities
           that implement the minimal subset of the
           DISMAN-PING-MIB.  Implementors might choose this
           subset for small devices with limited resources."
   MODULE  -- this module
       MANDATORY-GROUPS { pingMinimumGroup }

       GROUP pingCtlRowStatusGroup
       DESCRIPTION
           "A compliant implementation does not have to implement
           the pingCtlRowStatusGroup."

       GROUP pingHistoryGroup
       DESCRIPTION
           "A compliant implementation does not have to implement
           the pingHistoryGroup."

       GROUP pingNotificationsGroup
       DESCRIPTION
           "A compliant implementation does not have to implement
           the pingNotificationsGroup."

       OBJECT pingMaxConcurrentRequests
       MIN-ACCESS  read-only
       DESCRIPTION
           "The agent is not required to support set
           operations to this object."

       OBJECT pingCtlDataFill
       MIN-ACCESS  read-only
       DESCRIPTION
           "The agent is not required to support set
           operations to this object."

       OBJECT pingCtlFrequency
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingCtlMaxRows
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If the
           pingHistoryGroup is not implemented, then write
           access to this object MUST be disabled, and the object
           MUST return a value of 0 when retrieved."

       OBJECT pingCtlStorageType
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required."

       OBJECT pingCtlTrapGeneration
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If the
           pingNotificationsGroup is not implemented, then write
           access to this object MUST be disabled, and the object
           MUST return a value with no bit set when retrieved.
           No bit set indicates that not notification is
           generated."

       OBJECT pingCtlTrapProbeFailureFilter
       MIN-ACCESS  read-only
       DESCRIPTION
           "If write access to pingCtlTrapGeneration is not
           supported, then write access to this object must also
           not be supported.  In this case, return 0 as the value
           of this object."

       OBJECT pingCtlTrapTestFailureFilter
       MIN-ACCESS  read-only
       DESCRIPTION
           "If write access to pingCtlTrapGeneration is not
           supported, then write access to this object must also
           not be supported.  In this case, return 0 as the value
           of this object."

       OBJECT pingCtlType
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  In addition, the only
           value that MUST be supported by an implementation is
           pingIcmpEcho."

       OBJECT pingCtlDescr
       MIN-ACCESS  read-only
       DESCRIPTION
           "The agent is not required to support set
           operations to this object."

       OBJECT pingCtlSourceAddressType
       SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access to this object is not required by
           implementations that are not capable of binding the
           send socket with a source address.  An implementation
           is only required to support IPv4 and IPv6 addresses."

       OBJECT pingCtlSourceAddress
       SYNTAX  InetAddress (SIZE(0|4|16))
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access to this object is not required by
           implementations that are not capable of binding the
           send socket with a source address.  An implementation
           is only required to support IPv4 and IPv6 addresses."

       OBJECT pingCtlIfIndex
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingCtlByPassRouteTable
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If write access is
           not supported, return false(2) as the value of this
           object.  A value of false(2) means that the function
           represented by this option is not supported."

       OBJECT pingCtlDSField
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  If write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingResultsIpTargetAddressType
       SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }

       DESCRIPTION
           "An implementation is only required to
           support IPv4 and IPv6 addresses."

       OBJECT pingResultsIpTargetAddress
       SYNTAX  InetAddress (SIZE(0|4|16))
       DESCRIPTION
           "An implementation is only required to
           support IPv4 and globally unique IPv6 addresses."

       OBJECT pingResultsLastGoodProbe
       DESCRIPTION
           "This object is mandatory for implementations that have
           access to a system clock and that are capable of setting
           the values for DateAndTime objects.  It is RECOMMENDED
           that when this object is not supported its values
           be reported as '0000000000000000'H."

       OBJECT pingProbeHistoryTime
       DESCRIPTION
           "If the pingHistoryGroup is implemented, then this
           object is mandatory for implementations that have
           access to a system clock and that are capable of setting
           the values for DateAndTime objects.  It is RECOMMENDED
           that when this object is not supported its values
           be reported as '0000000000000000'H."

   ::= { pingCompliances 3 }

pingCompliance MODULE-COMPLIANCE
   STATUS  deprecated
   DESCRIPTION
           "The compliance statement for the DISMAN-PING-MIB.  This
           compliance statement has been deprecated because the
           group pingGroup and the pingTimeStampGroup have been
           split and deprecated.  The pingFullCompliance statement
           is semantically identical to the deprecated
           pingCompliance statement."

   MODULE  -- this module
       MANDATORY-GROUPS {
                           pingGroup,
                           pingNotificationsGroup
                         }
       GROUP pingTimeStampGroup
       DESCRIPTION
           "This group is mandatory for implementations that have
           access to a system clock and that are capable of setting
           the values for DateAndTime objects.  It is RECOMMENDED
           that when this group is not supported the values
           for the objects in this group be reported as
           '0000000000000000'H."

       OBJECT pingMaxConcurrentRequests
       MIN-ACCESS  read-only
       DESCRIPTION
           "The agent is not required to support set
           operations to this object."

       OBJECT pingCtlStorageType
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  It is also allowed
           that implementations support only the volatile
           StorageType enumeration."

       OBJECT pingCtlType
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  In addition, the only
           value that MUST be supported by an implementation is
           pingIcmpEcho."
       OBJECT pingCtlByPassRouteTable
       MIN-ACCESS  read-only
       DESCRIPTION
           "This object is not required by implementations that
           are not capable of its implementation.  The function
           represented by this object is implementable if the
           setsockopt SOL_SOCKET SO_DONTROUTE option is
           supported."

       OBJECT pingCtlSourceAddressType
       SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
       MIN-ACCESS  read-only
       DESCRIPTION
           "This object is not required by implementations that
           are not capable of binding the send socket with a
           source address.  An implementation is only required to
           support IPv4 and IPv6 addresses."

       OBJECT pingCtlSourceAddress
       SYNTAX  InetAddress (SIZE(0|4|16))
       MIN-ACCESS  read-only
       DESCRIPTION
           "This object is not required by implementations that
           are not capable of binding the send socket with a
           source address.  An implementation is only required to
           support IPv4 and globally unique IPv6 addresses."

       OBJECT pingCtlIfIndex
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  When write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingCtlDSField
       MIN-ACCESS  read-only
       DESCRIPTION
           "Write access is not required.  When write access is
           not supported, return a 0 as the value of this object.
           A value of 0 means that the function represented by
           this option is not supported."

       OBJECT pingResultsIpTargetAddressType
       SYNTAX  InetAddressType { unknown(0), ipv4(1), ipv6(2) }
       DESCRIPTION
           "An implementation is only required to
           support IPv4 and IPv6 addresses."
       OBJECT pingResultsIpTargetAddress
       SYNTAX  InetAddress (SIZE(0|4|16))
       DESCRIPTION
           "An implementation is only required to
           support IPv4 and globally unique IPv6 addresses."
   ::= { pingCompliances 1 }

-- MIB groupings

pingMinimumGroup OBJECT-GROUP
  OBJECTS {
            pingMaxConcurrentRequests,
            pingCtlTargetAddressType,
            pingCtlTargetAddress,
            pingCtlDataSize,
            pingCtlTimeOut,
            pingCtlProbeCount,
            pingCtlAdminStatus,
            pingCtlDataFill,
            pingCtlFrequency,
            pingCtlMaxRows,
            pingCtlStorageType,
            pingCtlTrapGeneration,
            pingCtlTrapProbeFailureFilter,
            pingCtlTrapTestFailureFilter,
            pingCtlType,
            pingCtlDescr,

            pingCtlByPassRouteTable,
            pingCtlSourceAddressType,
            pingCtlSourceAddress,
            pingCtlIfIndex,
            pingCtlDSField,
            pingResultsOperStatus,
            pingResultsIpTargetAddressType,
            pingResultsIpTargetAddress,
            pingResultsMinRtt,
            pingResultsMaxRtt,
            pingResultsAverageRtt,
            pingResultsProbeResponses,
            pingResultsSentProbes,
            pingResultsRttSumOfSquares,
            pingResultsLastGoodProbe
          }
  STATUS  current
  DESCRIPTION
      "The group of objects that constitute the remote ping
      capability."
   ::= { pingGroups 4 }

pingCtlRowStatusGroup OBJECT-GROUP
  OBJECTS {
            pingCtlRowStatus
          }
  STATUS  current
  DESCRIPTION
      "The RowStatus object of the pingCtlTable."
   ::= { pingGroups 5 }

pingHistoryGroup OBJECT-GROUP
  OBJECTS {
            pingProbeHistoryResponse,
            pingProbeHistoryStatus,
            pingProbeHistoryLastRC,
            pingProbeHistoryTime
          }
  STATUS  current
  DESCRIPTION
      "The group of objects that constitute the history
      capability."
   ::= { pingGroups 6 }

pingNotificationsGroup NOTIFICATION-GROUP
  NOTIFICATIONS {
            pingProbeFailed,
            pingTestFailed,
            pingTestCompleted
         }

  STATUS        current
  DESCRIPTION
      "The notification that are required to be supported by
      implementations of this MIB."
  ::= { pingGroups 3 }

pingGroup OBJECT-GROUP
  OBJECTS {
            pingMaxConcurrentRequests,
            pingCtlTargetAddressType,
            pingCtlTargetAddress,
            pingCtlDataSize,
            pingCtlTimeOut,
            pingCtlProbeCount,
            pingCtlAdminStatus,
            pingCtlDataFill,
            pingCtlFrequency,
            pingCtlMaxRows,
            pingCtlStorageType,
            pingCtlTrapGeneration,
            pingCtlTrapProbeFailureFilter,
            pingCtlTrapTestFailureFilter,
            pingCtlType,
            pingCtlDescr,
            pingCtlByPassRouteTable,
            pingCtlSourceAddressType,
            pingCtlSourceAddress,
            pingCtlIfIndex,
            pingCtlDSField,
            pingCtlRowStatus,
            pingResultsOperStatus,
            pingResultsIpTargetAddressType,
            pingResultsIpTargetAddress,
            pingResultsMinRtt,
            pingResultsMaxRtt,
            pingResultsAverageRtt,
            pingResultsProbeResponses,
            pingResultsSentProbes,
            pingResultsRttSumOfSquares,
            pingProbeHistoryResponse,
            pingProbeHistoryStatus,
            pingProbeHistoryLastRC
          }
  STATUS  deprecated
  DESCRIPTION
      "The group of objects that constitute the remote ping
      capability."
   ::= { pingGroups 1 }

pingTimeStampGroup OBJECT-GROUP

  OBJECTS {
            pingResultsLastGoodProbe,
            pingProbeHistoryTime
          }
  STATUS  deprecated
  DESCRIPTION
      "The group of DateAndTime objects."
   ::= { pingGroups 2 }

END
