SNMPv2-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
   TimeTicks, Counter32, snmpModules, mib-2
       FROM SNMPv2-SMI
   DisplayString, TestAndIncr, TimeStamp
       FROM SNMPv2-TC
   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
       FROM SNMPv2-CONF;

snmpMIB MODULE-IDENTITY
   LAST-UPDATED "200210160000Z"
   ORGANIZATION "IETF SNMPv3 Working Group"
   CONTACT-INFO
           "WG-EMail:   snmpv3@lists.tislabs.com
            Subscribe:  snmpv3-request@lists.tislabs.com

            Co-Chair:   Russ Mundy
                        Network Associates Laboratories
            postal:     15204 Omega Drive, Suite 300
                        Rockville, MD 20850-4601
                        USA
            EMail:      mundy@tislabs.com
            phone:      +1 301 947-7107

            Co-Chair:   David Harrington
                        Enterasys Networks
            postal:     35 Industrial Way
                        P. O. Box 5005
                        Rochester, NH 03866-5005
                        USA
            EMail:      dbh@enterasys.com
            phone:      +1 603 337-2614

            Editor:     Randy Presuhn
                        BMC Software, Inc.
            postal:     2141 North First Street
                        San Jose, CA 95131
                        USA
            EMail:      randy_presuhn@bmc.com
            phone:      +1 408 546-1006"
   DESCRIPTION
           "The MIB module for SNMP entities.

            Copyright (C) The Internet Society (2002). This
            version of this MIB module is part of RFC 3418;
            see the RFC itself for full legal notices.
           "
   REVISION      "200210160000Z"
   DESCRIPTION
           "This revision of this MIB module was published as
            RFC 3418."
   REVISION      "199511090000Z"
   DESCRIPTION
           "This revision of this MIB module was published as
            RFC 1907."
   REVISION      "199304010000Z"
   DESCRIPTION
           "The initial revision of this MIB module was published
           as RFC 1450."
   ::= { snmpModules 1 }

snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }

--  ::= { snmpMIBObjects 1 }        this OID is obsolete
--  ::= { snmpMIBObjects 2 }        this OID is obsolete
--  ::= { snmpMIBObjects 3 }        this OID is obsolete

-- the System group
--
-- a collection of objects common to all managed systems.

system   OBJECT IDENTIFIER ::= { mib-2 1 }

sysDescr OBJECT-TYPE
   SYNTAX      DisplayString (SIZE (0..255))
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
           "A textual description of the entity.  This value should
           include the full name and version identification of
           the system's hardware type, software operating-system,
           and networking software."
   ::= { system 1 }

sysObjectID OBJECT-TYPE
   SYNTAX      OBJECT IDENTIFIER
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
           "The vendor's authoritative identification of the
           network management subsystem contained in the entity.
           This value is allocated within the SMI enterprises
           subtree (1.3.6.1.4.1) and provides an easy and
           unambiguous means for determining `what kind of box' is
           being managed.  For example, if vendor `Flintstones,
           Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
           it could assign the identifier 1.3.6.1.4.1.424242.1.1
           to its `Fred Router'."
   ::= { system 2 }

sysUpTime OBJECT-TYPE
   SYNTAX      TimeTicks
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
           "The time (in hundredths of a second) since the
           network management portion of the system was last
           re-initialized."
   ::= { system 3 }

sysContact OBJECT-TYPE
   SYNTAX      DisplayString (SIZE (0..255))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
           "The textual identification of the contact person for
           this managed node, together with information on how
           to contact this person.  If no contact information is
           known, the value is the zero-length string."
   ::= { system 4 }

sysName OBJECT-TYPE
   SYNTAX      DisplayString (SIZE (0..255))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
           "An administratively-assigned name for this managed
           node.  By convention, this is the node's fully-qualified
           domain name.  If the name is unknown, the value is
           the zero-length string."
   ::= { system 5 }

sysLocation OBJECT-TYPE
   SYNTAX      DisplayString (SIZE (0..255))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
           "The physical location of this node (e.g., 'telephone
           closet, 3rd floor').  If the location is unknown, the
           value is the zero-length string."
   ::= { system 6 }

sysServices OBJECT-TYPE
   SYNTAX      INTEGER (0..127)
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
           "A value which indicates the set of services that this
           entity may potentially offer.  The value is a sum.
           This sum initially takes the value zero. Then, for
           each layer, L, in the range 1 through 7, that this node
           performs transactions for, 2 raised to (L - 1) is added
           to the sum.  For example, a node which performs only
           routing functions would have a value of 4 (2^(3-1)).
           In contrast, a node which is a host offering application
           services would have a value of 72 (2^(4-1) + 2^(7-1)).
           Note that in the context of the Internet suite of
           protocols, values should be calculated accordingly:

                layer      functionality
                  1        physical (e.g., repeaters)
                  2        datalink/subnetwork (e.g., bridges)
                  3        internet (e.g., supports the IP)
                  4        end-to-end  (e.g., supports the TCP)
                  7        applications (e.g., supports the SMTP)

           For systems including OSI protocols, layers 5 and 6
           may also be counted."
   ::= { system 7 }

-- object resource information
--
-- a collection of objects which describe the SNMP entity's
-- (statically and dynamically configurable) support of
-- various MIB modules.

sysORLastChange OBJECT-TYPE
   SYNTAX     TimeStamp
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "The value of sysUpTime at the time of the most recent
           change in state or value of any instance of sysORID."
   ::= { system 8 }

sysORTable OBJECT-TYPE
   SYNTAX     SEQUENCE OF SysOREntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
           "The (conceptual) table listing the capabilities of
           the local SNMP application acting as a command
           responder with respect to various MIB modules.
           SNMP entities having dynamically-configurable support
           of MIB modules will have a dynamically-varying number
           of conceptual rows."
   ::= { system 9 }

sysOREntry OBJECT-TYPE
   SYNTAX     SysOREntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
           "An entry (conceptual row) in the sysORTable."
   INDEX      { sysORIndex }
   ::= { sysORTable 1 }

SysOREntry ::= SEQUENCE {
   sysORIndex     INTEGER,
   sysORID        OBJECT IDENTIFIER,
   sysORDescr     DisplayString,
   sysORUpTime    TimeStamp
}

sysORIndex OBJECT-TYPE
   SYNTAX     INTEGER (1..2147483647)
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
           "The auxiliary variable used for identifying instances
           of the columnar objects in the sysORTable."
   ::= { sysOREntry 1 }

sysORID OBJECT-TYPE
   SYNTAX     OBJECT IDENTIFIER
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "An authoritative identification of a capabilities
           statement with respect to various MIB modules supported
           by the local SNMP application acting as a command
           responder."
   ::= { sysOREntry 2 }

sysORDescr OBJECT-TYPE
   SYNTAX     DisplayString
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "A textual description of the capabilities identified
           by the corresponding instance of sysORID."
   ::= { sysOREntry 3 }

sysORUpTime OBJECT-TYPE
   SYNTAX     TimeStamp
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "The value of sysUpTime at the time this conceptual
           row was last instantiated."
   ::= { sysOREntry 4 }


-- the SNMP group
--
-- a collection of objects providing basic instrumentation and
-- control of an SNMP entity.

snmp     OBJECT IDENTIFIER ::= { mib-2 11 }

snmpInPkts OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "The total number of messages delivered to the SNMP
           entity from the transport service."
   ::= { snmp 1 }

snmpInBadVersions OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "The total number of SNMP messages which were delivered
           to the SNMP entity and were for an unsupported SNMP
           version."
   ::= { snmp 3 }

snmpInBadCommunityNames OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
          "The total number of community-based SNMP messages (for
          example,  SNMPv1) delivered to the SNMP entity which
          used an SNMP community name not known to said entity.
          Also, implementations which authenticate community-based
          SNMP messages using check(s) in addition to matching
          the community name (for example, by also checking
          whether the message originated from a transport address
          allowed to use a specified community name) MAY include
          in this value the number of messages which failed the
          additional check(s).  It is strongly RECOMMENDED that
          the documentation for any security model which is used
          to authenticate community-based SNMP messages specify
          the precise conditions that contribute to this value."
   ::= { snmp 4 }

snmpInBadCommunityUses OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
          "The total number of community-based SNMP messages (for
          example, SNMPv1) delivered to the SNMP entity which
          represented an SNMP operation that was not allowed for
          the SNMP community named in the message.  The precise
          conditions under which this counter is incremented
          (if at all) depend on how the SNMP entity implements
          its access control mechanism and how its applications
          interact with that access control mechanism.  It is
          strongly RECOMMENDED that the documentation for any
          access control mechanism which is used to control access
          to and visibility of MIB instrumentation specify the
          precise conditions that contribute to this value."
   ::= { snmp 5 }

snmpInASNParseErrs OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "The total number of ASN.1 or BER errors encountered by
           the SNMP entity when decoding received SNMP messages."
   ::= { snmp 6 }

snmpEnableAuthenTraps OBJECT-TYPE
   SYNTAX      INTEGER { enabled(1), disabled(2) }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
           "Indicates whether the SNMP entity is permitted to
           generate authenticationFailure traps.  The value of this
           object overrides any configuration information; as such,
           it provides a means whereby all authenticationFailure
           traps may be disabled.

           Note that it is strongly recommended that this object
           be stored in non-volatile memory so that it remains
           constant across re-initializations of the network
           management system."
   ::= { snmp 30 }

snmpSilentDrops OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
          "The total number of Confirmed Class PDUs (such as
          GetRequest-PDUs, GetNextRequest-PDUs,
          GetBulkRequest-PDUs, SetRequest-PDUs, and
          InformRequest-PDUs) delivered to the SNMP entity which
          were silently dropped because the size of a reply
          containing an alternate Response Class PDU (such as a
          Response-PDU) with an empty variable-bindings field
          was greater than either a local constraint or the
          maximum message size associated with the originator of
          the request."
   ::= { snmp 31 }

snmpProxyDrops OBJECT-TYPE
   SYNTAX     Counter32
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
           "The total number of Confirmed Class PDUs
           (such as GetRequest-PDUs, GetNextRequest-PDUs,
           GetBulkRequest-PDUs, SetRequest-PDUs, and
           InformRequest-PDUs) delivered to the SNMP entity which
           were silently dropped because the transmission of
           the (possibly translated) message to a proxy target
           failed in a manner (other than a time-out) such that
           no Response Class PDU (such as a Response-PDU) could
           be returned."
   ::= { snmp 32 }

-- information for notifications
--
-- a collection of objects which allow the SNMP entity, when
-- supporting a notification originator application,
-- to be configured to generate SNMPv2-Trap-PDUs.

snmpTrap       OBJECT IDENTIFIER ::= { snmpMIBObjects 4 }

snmpTrapOID OBJECT-TYPE
   SYNTAX     OBJECT IDENTIFIER
   MAX-ACCESS accessible-for-notify
   STATUS     current
   DESCRIPTION
           "The authoritative identification of the notification
           currently being sent.  This variable occurs as
           the second varbind in every SNMPv2-Trap-PDU and
           InformRequest-PDU."
   ::= { snmpTrap 1 }

--  ::= { snmpTrap 2 }   this OID is obsolete

snmpTrapEnterprise OBJECT-TYPE
   SYNTAX     OBJECT IDENTIFIER
   MAX-ACCESS accessible-for-notify
   STATUS     current
   DESCRIPTION
           "The authoritative identification of the enterprise
           associated with the trap currently being sent.  When an
           SNMP proxy agent is mapping an RFC1157 Trap-PDU
           into a SNMPv2-Trap-PDU, this variable occurs as the
           last varbind."
   ::= { snmpTrap 3 }

--  ::= { snmpTrap 4 }   this OID is obsolete


-- well-known traps

snmpTraps      OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }

coldStart NOTIFICATION-TYPE
   STATUS  current
   DESCRIPTION
           "A coldStart trap signifies that the SNMP entity,
           supporting a notification originator application, is
           reinitializing itself and that its configuration may
           have been altered."
   ::= { snmpTraps 1 }

warmStart NOTIFICATION-TYPE
   STATUS  current
   DESCRIPTION
           "A warmStart trap signifies that the SNMP entity,
           supporting a notification originator application,
           is reinitializing itself such that its configuration
           is unaltered."
   ::= { snmpTraps 2 }

-- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }
-- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }
-- are defined in RFC 2863 [RFC2863]

authenticationFailure NOTIFICATION-TYPE
   STATUS  current
   DESCRIPTION
           "An authenticationFailure trap signifies that the SNMP
            entity has received a protocol message that is not
            properly authenticated.  While all implementations
            of SNMP entities MAY be capable of generating this
            trap, the snmpEnableAuthenTraps object indicates
            whether this trap will be generated."
   ::= { snmpTraps 5 }

-- Note the egpNeighborLoss notification is defined
-- as { snmpTraps 6 } in RFC 1213

-- the set group
--
-- a collection of objects which allow several cooperating
-- command generator applications to coordinate their use of the
-- set operation.

snmpSet        OBJECT IDENTIFIER ::= { snmpMIBObjects 6 }

snmpSetSerialNo OBJECT-TYPE
   SYNTAX     TestAndIncr
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
           "An advisory lock used to allow several cooperating
           command generator applications to coordinate their
           use of the SNMP set operation.

           This object is used for coarse-grain coordination.
           To achieve fine-grain coordination, one or more similar
           objects might be defined within each MIB group, as
           appropriate."
   ::= { snmpSet 1 }

-- conformance information

snmpMIBConformance
              OBJECT IDENTIFIER ::= { snmpMIB 2 }

snmpMIBCompliances
              OBJECT IDENTIFIER ::= { snmpMIBConformance 1 }
snmpMIBGroups  OBJECT IDENTIFIER ::= { snmpMIBConformance 2 }

-- compliance statements

--    ::= { snmpMIBCompliances 1 }      this OID is obsolete
snmpBasicCompliance MODULE-COMPLIANCE
   STATUS  deprecated
   DESCRIPTION
           "The compliance statement for SNMPv2 entities which
           implement the SNMPv2 MIB.

           This compliance statement is replaced by
           snmpBasicComplianceRev2."
   MODULE  -- this module
       MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
                          snmpBasicNotificationsGroup }

       GROUP   snmpCommunityGroup
       DESCRIPTION
           "This group is mandatory for SNMPv2 entities which
           support community-based authentication."

   ::= { snmpMIBCompliances 2 }

snmpBasicComplianceRev2 MODULE-COMPLIANCE
   STATUS  current
   DESCRIPTION
           "The compliance statement for SNMP entities which
           implement this MIB module."
   MODULE  -- this module
       MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
                          snmpBasicNotificationsGroup }

       GROUP   snmpCommunityGroup
       DESCRIPTION
           "This group is mandatory for SNMP entities which
           support community-based authentication."

       GROUP   snmpWarmStartNotificationGroup
       DESCRIPTION
           "This group is mandatory for an SNMP entity which
           supports command responder applications, and is
           able to reinitialize itself such that its
           configuration is unaltered."

   ::= { snmpMIBCompliances 3 }

-- units of conformance

--  ::= { snmpMIBGroups 1 }           this OID is obsolete
--  ::= { snmpMIBGroups 2 }           this OID is obsolete
--  ::= { snmpMIBGroups 3 }           this OID is obsolete
--  ::= { snmpMIBGroups 4 }           this OID is obsolete

snmpGroup OBJECT-GROUP
   OBJECTS { snmpInPkts,
             snmpInBadVersions,
             snmpInASNParseErrs,
             snmpSilentDrops,
             snmpProxyDrops,
             snmpEnableAuthenTraps }
   STATUS  current
   DESCRIPTION
           "A collection of objects providing basic instrumentation
           and control of an SNMP entity."
   ::= { snmpMIBGroups 8 }

snmpCommunityGroup OBJECT-GROUP
   OBJECTS { snmpInBadCommunityNames,
             snmpInBadCommunityUses }
   STATUS  current
   DESCRIPTION
           "A collection of objects providing basic instrumentation
           of a SNMP entity which supports community-based
           authentication."
   ::= { snmpMIBGroups 9 }

snmpSetGroup OBJECT-GROUP
   OBJECTS { snmpSetSerialNo }
   STATUS  current
   DESCRIPTION
           "A collection of objects which allow several cooperating
           command generator applications to coordinate their
           use of the set operation."
   ::= { snmpMIBGroups 5 }

systemGroup OBJECT-GROUP
   OBJECTS { sysDescr, sysObjectID, sysUpTime,
             sysContact, sysName, sysLocation,
             sysServices,
             sysORLastChange, sysORID,
             sysORUpTime, sysORDescr }
   STATUS  current
   DESCRIPTION
           "The system group defines objects which are common to all
           managed systems."
   ::= { snmpMIBGroups 6 }

snmpBasicNotificationsGroup NOTIFICATION-GROUP
   NOTIFICATIONS { coldStart, authenticationFailure }
   STATUS        current
   DESCRIPTION
      "The basic notifications implemented by an SNMP entity
       supporting command responder applications."
   ::= { snmpMIBGroups 7 }

snmpWarmStartNotificationGroup NOTIFICATION-GROUP
  NOTIFICATIONS { warmStart }
  STATUS        current
  DESCRIPTION
    "An additional notification for an SNMP entity supporting
    command responder applications, if it is able to reinitialize
    itself such that its configuration is unaltered."
 ::= { snmpMIBGroups 11 }

snmpNotificationGroup OBJECT-GROUP
   OBJECTS { snmpTrapOID, snmpTrapEnterprise }
   STATUS  current
   DESCRIPTION
           "These objects are required for entities
           which support notification originator applications."
   ::= { snmpMIBGroups 12 }

-- definitions in RFC 1213 made obsolete by the inclusion of a
-- subset of the snmp group in this MIB

snmpOutPkts OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Messages which were
           passed from the SNMP protocol entity to the
           transport service."
   ::= { snmp 2 }

-- { snmp 7 } is not used

snmpInTooBigs OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were
           delivered to the SNMP protocol entity and for
           which the value of the error-status field was
           `tooBig'."
   ::= { snmp 8 }

snmpInNoSuchNames OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were
           delivered to the SNMP protocol entity and for
           which the value of the error-status field was
           `noSuchName'."
   ::= { snmp 9 }

snmpInBadValues OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were
           delivered to the SNMP protocol entity and for
           which the value of the error-status field was
           `badValue'."
   ::= { snmp 10 }

snmpInReadOnlys OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number valid SNMP PDUs which were delivered
           to the SNMP protocol entity and for which the value
           of the error-status field was `readOnly'.  It should
           be noted that it is a protocol error to generate an
           SNMP PDU which contains the value `readOnly' in the
           error-status field, as such this object is provided
           as a means of detecting incorrect implementations of
           the SNMP."
   ::= { snmp 11 }

snmpInGenErrs OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were delivered
           to the SNMP protocol entity and for which the value
           of the error-status field was `genErr'."
   ::= { snmp 12 }

snmpInTotalReqVars OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of MIB objects which have been
           retrieved successfully by the SNMP protocol entity
           as the result of receiving valid SNMP Get-Request
           and Get-Next PDUs."
   ::= { snmp 13 }

snmpInTotalSetVars OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of MIB objects which have been
           altered successfully by the SNMP protocol entity as
           the result of receiving valid SNMP Set-Request PDUs."
   ::= { snmp 14 }

snmpInGetRequests OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Get-Request PDUs which
           have been accepted and processed by the SNMP
           protocol entity."
   ::= { snmp 15 }

snmpInGetNexts OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Get-Next PDUs which have been
           accepted and processed by the SNMP protocol entity."
   ::= { snmp 16 }

snmpInSetRequests OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Set-Request PDUs which
           have been accepted and processed by the SNMP protocol
           entity."
   ::= { snmp 17 }

snmpInGetResponses OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Get-Response PDUs which
           have been accepted and processed by the SNMP protocol
           entity."
   ::= { snmp 18 }

snmpInTraps OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Trap PDUs which have been
           accepted and processed by the SNMP protocol entity."
   ::= { snmp 19 }

snmpOutTooBigs OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were generated
           by the SNMP protocol entity and for which the value
           of the error-status field was `tooBig.'"
   ::= { snmp 20 }

snmpOutNoSuchNames OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were generated
           by the SNMP protocol entity and for which the value
           of the error-status was `noSuchName'."
   ::= { snmp 21 }

snmpOutBadValues OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were generated
           by the SNMP protocol entity and for which the value
           of the error-status field was `badValue'."
   ::= { snmp 22 }

-- { snmp 23 } is not used

snmpOutGenErrs OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP PDUs which were generated
           by the SNMP protocol entity and for which the value
           of the error-status field was `genErr'."
   ::= { snmp 24 }

snmpOutGetRequests OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Get-Request PDUs which
           have been generated by the SNMP protocol entity."
   ::= { snmp 25 }

snmpOutGetNexts OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Get-Next PDUs which have
           been generated by the SNMP protocol entity."
   ::= { snmp 26 }

snmpOutSetRequests OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Set-Request PDUs which
           have been generated by the SNMP protocol entity."
   ::= { snmp 27 }

snmpOutGetResponses OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Get-Response PDUs which
           have been generated by the SNMP protocol entity."
   ::= { snmp 28 }

snmpOutTraps OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      obsolete
   DESCRIPTION
           "The total number of SNMP Trap PDUs which have
           been generated by the SNMP protocol entity."
   ::= { snmp 29 }

snmpObsoleteGroup OBJECT-GROUP
   OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
             snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
             snmpInTotalReqVars, snmpInTotalSetVars,
             snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
             snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
             snmpOutNoSuchNames, snmpOutBadValues,
             snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
             snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
             }
   STATUS  obsolete
   DESCRIPTION
           "A collection of objects from RFC 1213 made obsolete
           by this MIB module."
   ::= { snmpMIBGroups 10 }

END

