NetXMS Support Forum

Thanks for considering our problem for the 1.2.8 release.

Best regards

Hello,

Is there a way to avoid this expectation of the standard MIBs?

Best regards

 There aren't any standard MIBs. It begins under .1.3.6.1.4.1.14848:
http://www.messpc.de/MIB/betternetworks_ethernetbox.mib

Best regards

The device responded to both requests however it replied with null.

Best regards

Here is the output:

[06-Jun-2013 14:09:00] Sending poll request to server...
[06-Jun-2013 14:09:00] Poll request accepted
[06-Jun-2013 14:09:00] Starting configuration poll for node test sensorbox
[06-Jun-2013 14:09:00] Checking node's capabilities...
[06-Jun-2013 14:09:00]    Checking SNMP...
[06-Jun-2013 14:09:56] Capability check finished
[06-Jun-2013 14:09:56] Checking interface configuration...
[06-Jun-2013 14:09:56] eUnable to get interface list from node
[06-Jun-2013 14:09:56] w   Interface "unknown" is no longer exist
[06-Jun-2013 14:09:56] Interface configuration check finished
[06-Jun-2013 14:09:56] Checking node name
[06-Jun-2013 14:09:56] Node name is OK
[06-Jun-2013 14:09:56] Finished configuration poll for node test sensorbox
[06-Jun-2013 14:09:56] Node configuration was not changed after poll
[06-Jun-2013 14:09:56] Poll completed successfully


Best regards

Hello,

The -v1 option worked, but we selected in the node properties communication snmpv1.

Best regards

Hi,

I send you the captured packets. It contains captured packets from the snmptester (first one) and from nxsnmpget (second one).

Best regards

Hi,

Thanks for the reply. We tested it with the tools, but the host doesn't answer(request timed out). However we tested it with the mibbrowser from ireasoning and with the snmptester from the Paessler AG. We got the values with both tools. We used the snmptester on the server where we installed netxms as well as on a client. We also used an other ethernetbox, but the same problem occurred. The problem occured after the update from the netxms version 1.0.7 to 1.2.7.

Edit: We installed Netxms (V1.2.7) on an other Server but the result was the same.

Best regards

Hi,

We have a problem with the Ethernetbox from Messpc. We created a node for the Ethernetbox and we got the message that the device is not capable with snmp in the object properties. Is there a way to set the value from "isSNMP" manually to true?

Best regards