NetXMS Support Forum

Hello,
SNMP monitoring is enabled in Cisco Switch C3750. And Data collection objects are collected correctly (sysName, sysUpTime,..) but interface list is not.
And everytime i try full poll configuration, i get Unable to get interface list from node.
Besides, information in Object Details is missing, like System Description
I don't know what i can make to make it happen correctly espesially that i searched in the forum and didn't find any clue.

Thanks in advance.
Regards.

Hello Sir,
I believe that setting community string to default "public" resolved my issue in my MSL. But i wonder what was the problem with it..?

here is the full configuration poll :
[16.08.2016 15:33:40] **** Poll request sent to server ****
[16.08.2016 15:33:40] Poll request accepted
[16.08.2016 15:33:40] Starting configuration poll for node ROBOT-SAUVEGARDE
[16.08.2016 15:33:40] Capability reset
[16.08.2016 15:33:40] Checking node's capabilities...
[16.08.2016 15:33:40]    Checking SNMP...
[16.08.2016 15:33:41] Capability check finished
[16.08.2016 15:33:41] Checking interface configuration...
[16.08.2016 15:33:41] Unable to get interface list from node
[16.08.2016 15:33:41]    Interface "unknown" is no longer exist
[16.08.2016 15:33:41] Interface configuration check finished
[16.08.2016 15:33:41] Checking node name
[16.08.2016 15:33:41] Node name is OK
[16.08.2016 15:33:41] Finished configuration poll for node ROBOT-SAUVEGARDE
[16.08.2016 15:33:41] Node configuration was not changed after poll
[16.08.2016 15:33:41] **** Poll completed successfully ****

Besides, i get a different trap which is like the picture joint to this.
About your first question, no, it doesn't see the MSL as SNMP node.

here are screenshots of my configuration :

Hello, and thank you for your reply.
I am using the newest version 2.0.5 and SQL Server 2008 as Database Management Software. All this, is installed in a Windows Server 2008 R2 VM.

Hello,
My NetXMS server (2.0.5) is running on WIndows Server 2008 and i want to monitor an HP MSL 4048 Tapelibrary with SNMP.
I created the appropriate node with deactivating agent polling, configured the MSL with the appropriate SNMP community which is configured in the MSL Management Network.
But, every minute, i get : SNMP_AUTH_FAILURE.
I would be so grateful if anyone can share a tip that helps resolving this problem.
Thanks in advance.

Hello, I just want to tell you that I have found a temporary workaround by activating ping.nsm agent in that remote server (suposed to tell if there's internet connectivity or not for that location) and created a DCI icmp.ping(www.google.com) and configured thresholds to tell if it is ok or not.

Just another question, how can i set alarms to auto-resolve?

Thanks in advance.

any help gladiators, please?

attached to this post, i demonstrate for you what i did to test connection with my ISP.

Hello,
How can i monitor internet availability in my remote locations please?

I am trying to provide a mean to check Internet availability for my remote users. So I created a node with IP address of my ISP gateway. But, the state does not change, even if the ping is OK.

All i want to do, is to say if the remote locations of my company have internet connections or not.

Thanks in advance.

Thanks, i'll do my best and send you feedback.
Regards

Thank you so much, that works finally, i did as you said, and it works finally.

thank you so much for your help. I'll search deeper to find out what's not going alright with these OIDs.

Hello, and thanks for your answer.

I took your answer as if the OID that i were looking for was wrong. I searched in Cisco Websites and took another OID, which is :     1.3.6.1.4.1.14179.1.1.5.3     agentFreeMemory. But in the console, it gives me the same error. I don't know what i have to do with it now.
Joint, the error alarm from the Console.

Thanks in advance.

Hello,
I am trying to monitor a CISCO 3725 Layer 3 switch with NetXMS through SNMP. I configured the switch with the appropriate community string and the detection in NetXMS console was successful. But, when i try to configure a Data Collection Item, it says that it is not supported.
Joint, is the configuration of the DCI.
What should i do to make it work please?
Thanks in advance.