NetXMS Support Forum

Hi Filipp Sudanov

I have tried this and am really stuck. Picture A is the script in the script library, Picture B is the script in the source router DCI. However the value has remained -1 regardless in picture C. Picture D shows I can reach the ip 10.10.10.2 from the source router and this is the ip in the script destination. IS there anything am missing?

Quote from: Tatjana Dubrovica on June 06, 2025, 01:36:39 PMThere is new blog post about Grafana/NetXMS integration. Maybe object queries might help you with interface display options.
Post:
https://netxms.com/blog/grafana-configuraiton-in-netxms

Wow, Wow..Thank you so much Tatjana Dubrovica. This is a life saver. I have struggled working with infinity plugin to get all the things I want. Though I have made a little progress, the blog post provides a lot more granular insight. I really do appreciate this..

Quote from: Tatjana Dubrovica on May 09, 2025, 07:04:53 PMFirst endpoint also just works without Grafana plugin (it just provides data in human readable way).

Thank you for the support Tatjana Dubrovica. I have successfully retrieved the Alarms via API on grafana. I was wondering if I can do same to retrieve the following via API. Are there limitations? I cant find any clue on the API documentations.

1. DCI
2. Status Map
3. Device interfaces as it is on NetXMS UI and hardware inventory
4. Maps - the nice map showing real time statistics of link and interface states

If not supported via API, can it be done by querying the postgres database directly?

Quote from: Filipp Sudanov on May 20, 2025, 06:26:00 PMIt's probably taking the first line of the output that was obtained via ssh. In this case it's !!!!!, which might be interpreted as 0 if the DCI is Integer.
If you check history for this DCI, raw value column might have some clue.

if your router supports i command which allows to filter the output, you can do something like this:

Code Select Expand

ping 8.8.8.8 repeat 3 timeout 1 | i SuccessThis would limit the output just to one line, which then can be parsed using transformation script. Note that I limited number of requests and timeout as by default there's 4 second limitation between netxms server and agent - result should be returned within that time.

If above is not possible, the other approach is to call ssh command from NXSL script. In this case all lines of output are received (as array) and we can parse this array to extract data:

Code Select Expand

r = $node.executeSSHCommand("ping 8.8.8.8 repeat 3 timeout 1");
avg = -1;
for (s : r) {
  m = s match "Success rate is .* round-trip min/avg/max = .*/(.*)/.*";
  if (m) avg = m[1];
}
return avg;

You can either put this script into script library and use it in Script DCI; or you can make Internal DCI with metric Dummy and put this into transformation script.

Thank you soo much Filipi, Am going to test this and come back. I know am quite new to NetXMS and learning. I will try this out..Thank you

Hi,

I tried testing with SSH and also debugging netxms agent at the same. I see the following debug output(ping) but the DCI just keep showing zero(ping2). When I ping the same remote endpoint from the source router(ping3) the response time is much higher. Not sure what the problem is. Or am I  not outputting the result properly ?

Quote from: Filipp Sudanov on May 16, 2025, 05:05:04 PMNetXMS can connect via ssh, send some command and get first line of output of that command as DCI value. See more here: https://netxms.org/documentation/adminguide/ssh-monitoring.html
For SNMP you just need to create a new DCI with origin SNMP and put OID into the Metric field.
However, I can not tell if your specific device can perform pinging and report value via mentioned methods. Ssh is probably more promising, as typically ping command is present on devices.

Thank you for providing feedback.Am using Its HPE router and Cisco router . I will try the ssh versions as it appears to be more like what can be done easily. Do you also mean there is SNMP OID to use to extract ICMP data on remote device by this statement - "For SNMP you just need to create a new DCI with origin SNMP and put OID into the Metric field.".?

Quote from: Filipp Sudanov on May 16, 2025, 09:23:18 AMDepending on what that router supports. If you could install NetXMS agent there, that would be the best way - e.g. this can be done with some newer Mikrotiks that support containers. If not, then you can collect data via snmp or ssh. Or you can put some machine with netxms agent in the proximity of this router.

Thank you Filipp, nothing can be installed on the router. You mentioned this can be achieved using ssh and SNMP. Do you mind throwing more light. 

I have wondered if there is a better way to monitor ISP connectivity using ICMP - latency, packet loss and RTT. The challenge is that when ICMP request is sent from netxms server to ISP, the result is usually affected by underlying LAN network and doesn't give true picture to measure from the Edge Router (Source) to ISP end (destination). Is there a way to achieve this using Netxms where the router becomes the source to send ICMP echo request.

Thank you. I had thought is particular to the plugin. It made more sense now. Trying this out. Appreciate the input.

Hi Tatjana,

Thank you soooo much. it worked. I resorted to using option 2 since I am using newer version of grafana and it does appear the plugin is deprecated on newer grafana version

Hi

Am trying to replicate this dashboard https://netxms.org/documentation/adminguide/_images/grafana-alarm-browser.png by making API calls. Am able to get some data in but I cant see any API that retrieves the node name. All I see is the object ID as seen below. Is  there a way to get it to show the actual device name and not just ID. This is my API http://x.x.x.x:8080/webapi/alarms