NetXMS Support Forum

Please login or register.

Login with username, password and session length

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - gmonk63

Pages: [1] 2 3
General Support / AWS agent
« on: March 05, 2018, 07:31:55 pm »
I have an AWS instance I want to add in netxms.  I installed the agent and changed the agent port to a non standard port ex  3355  however i can not communicate to it from the server. I changed agent port settings to match on netxms but it does not seem to want to connect.

General Support / MQTT
« on: January 25, 2018, 07:54:22 pm »
Are you guys going to release any documentation on setting this up ?  We have a use case where we have some modbus devices and using modbus2mqtt  we would like to log that data in netxms


Gary Bonner

General Support / 2.1M3 Mqtt support
« on: April 06, 2017, 03:08:14 am »
Just curious.. I see experimental mqtt support was added and looking at the source it is only listed under subagents.  Is both the broker and client running on the agent ?   Just trying to figure out the topology of this. Does the agent publish predefined metrics to the server ?


Installation / V2.1-M2 build problem
« on: February 07, 2017, 12:10:07 am »
getting the following when trying to install..  this is on a Ubuntu 16.04 system installing from source 

/usr/local/bin/nxmibc: symbol lookup error: /usr/local/lib/ undefined symbol: wfopen
Makefile:1204: recipe for target 'install-data-hook' failed
make[5]: *** [install-data-hook] Error 127
make[5]: Leaving directory '/home/nmsadmin/netxms-2.1-M2/contrib/mibs'
Makefile:1139: recipe for target 'install-data-am' failed
make[4]: *** [install-data-am] Error 2
make[4]: Leaving directory '/home/nmsadmin/netxms-2.1-M2/contrib/mibs'
Makefile:1094: recipe for target 'install-am' failed
make[3]: *** [install-am] Error 2
make[3]: Leaving directory '/home/nmsadmin/netxms-2.1-M2/contrib/mibs'
Makefile:431: recipe for target 'install-recursive' failed
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory '/home/nmsadmin/netxms-2.1-M2/contrib'
Makefile:481: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '/home/nmsadmin/netxms-2.1-M2'
Makefile:775: recipe for target 'install' failed
make: *** [install] Error 2

General Support / False Agent Detection
« on: January 18, 2017, 04:47:40 pm »
I have several switches that Netxms  2.0.5 is communicating with SNMPV3   I have seen this issues more than once but never thought too much about it but now its becoming a pain.  For some reason after configuration probably after the configurations polls are executed netxms  sees these layer 2 switches as having agents   which breaks any DCI and summary tables these are associated with..  Any suggestions as to how I can stop this or is this just a bug


General Support / CLI
« on: October 31, 2016, 08:13:08 pm »
Is it possible to launch on demand topology polls and network discoveries via the command line ?

General Support / nxshell snmp vaules
« on: September 20, 2016, 08:53:46 pm »
Is it possible to get snmp values via nxshell ?  I need to get the serial numbers for a certain type of switch and the only way is via snmp


General Support / Custom scripts
« on: September 03, 2016, 09:23:39 pm »
Can we start a thread or a place for people to post scripts.  I think it would be useful..Im sure there are alot of people that have scripts that could be useful for new comers or some that maybe trying to do the same thing.


Installation / ZeroMQ
« on: August 23, 2016, 05:44:33 pm »
i dont see any documentation for zeromq.. is this going to be used for pub/sub to alarms or will it be able to do api calls to the server using req/resp  and any zeromq client.

General Support / PING Subagent
« on: August 21, 2016, 09:10:39 pm »
Is is possible to cause a node to go into critical or down status based on the results from icmp stats.  I have a subagent setup to monitor latency of several hosts  but when the threshold is met the alarm is generated for the agent and not the instance being monitored ..  I would like to generate  a critical or down status if the latency shows 10k  for that particular instance   

Feature Requests / User permissions
« on: August 06, 2016, 06:04:56 am »
It would be nice to be able to assign nodes to users... So if you have user Tech1 which is only concerned with servers. You can select which servers he should be able to see Alarms for and only those. And Tech2 which is only concerned with PC's  he only recieve alarms for those selected

General Support / DCI checks over SSH
« on: August 04, 2016, 04:08:29 am »
Is there a way through scripting or other to do checks on nodes that dont either support SNMP or Agent  but have ssh access.   Since ssh supports running remote commands such as  if i run "ssh me@remotenode uname -a "  will give me system identification info  could I create a DCI that could run these remote commands via SSH to gather data ?  I have a switch that does not fully support SNMP and  only way to gather interface,cpu or temp stats is either via web or login and run a custom executable which comminticates with switch chip my only options is try and scrape the data from the gui or run the custom commands over ssh and return it to NETXMS but i dont see any way to do that in the DCI setup options...


Installation / Ubiquity Edge Router Pro / Edge Router Lite Agent
« on: August 04, 2016, 02:41:14 am »
For any one interested I compiled a Agent that will run on a Ubiquity Edge Router/Lite products ... I currently use these as Pollers to proxy snmp or icmp polls  to ease the load on the main server. They also act as distribution devices to the field so it helps to be able to get interface BW and CPU usage for a segment .. Also here is the script that i use to assign nodes to these so i dont have to go one by one ...Just grab the object id of the poller and add the object names in the .txt file   You will have to scp the deb file to the router then run sudo dpkg -i netxms_ubnt_2.0.5.deb to install this will install to /usr/local  and config files to /etc/nxagentd.conf   also you will need to run "sudo ldconfig" after install or else you will have errors when attempting to start  with  "sudo service nxagentd start "  You will also need to vi the nxagentd.conf with your own params....  Hope this can be useful to someone

from org.netxms.client.objects import Node

for name in open("snmp-proxy.txt").readlines():
    node = session.findObjectByName(name.strip())
    if node:
        md = NXCObjectModificationData(node.getObjectId())
        proxy = 10254

Installation / Migrating to new server
« on: June 30, 2016, 11:27:43 pm »
Question I currently have a server ubuntu 14.04 with netxms 2.0.1   I have purchased a newer server and want to migrate all data to the new server which is ubuntu 16.04  but I want to install the latest Netxms version 2.0.4   can i simply install the new version and dump and restore the data base using mysql tools or do i need to do this using nxdbmgr  and what is the difference between using nxdbmgr vs mysql dump  does dbmgr only grab the schema and not the data ?


General Support / OpenWRT Agent
« on: June 03, 2016, 02:23:13 am »
Just curious what versions of WRT is netxms agent compatible with ?  I tried to build it on 15.05 and got the following

make[6]: Entering directory `/home/gmonk/Desktop/openwrt/build_dir/target-mips_34kc_uClibc-'
  CXX      libnetxms_la-tools.lo
In file included from libnetxms.h:27:0,
                 from tools.cpp:23:
../../include/nms_common.h:1175:13: error: previous declaration of 'void nx_free(void*)' with 'C++' linkage
 inline void nx_free(void *p)
In file included from /home/gmonk/Desktop/openwrt/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-,
                 from /home/gmonk/Desktop/openwrt/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-,
                 from ../../include/unicode.h:119,
                 from ../../include/nms_common.h:72,
                 from libnetxms.h:27,
                 from tools.cpp:23:
/home/gmonk/Desktop/openwrt/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc- error: conflicts with new declaration with 'C' linkage
 extern void free __MALLOC_P ((__malloc_ptr_t __ptr));
make[6]: *** [libnetxms_la-tools.lo] Error 1
make[6]: Leaving directory `/home/gmonk/Desktop/openwrt/build_dir/target-mips_34kc_uClibc-'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/home/gmonk/Desktop/openwrt/build_dir/target-mips_34kc_uClibc-'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/home/gmonk/Desktop/openwrt/build_dir/target-mips_34kc_uClibc-'
make[3]: *** [all] Error 2
make[3]: Leaving directory `/home/gmonk/Desktop/openwrt/build_dir/target-mips_34kc_uClibc-'
make[2]: *** [/home/gmonk/Desktop/openwrt/build_dir/target-mips_34kc_uClibc-] Error 2
make[2]: Leaving directory `/home/gmonk/Desktop/openwrt/feeds/netxms/admin/netxms'
make[1]: *** [package/feeds/netxms/netxms/install] Error 2
make[1]: Leaving directory `/home/gmonk/Desktop/openwrt'

Pages: [1] 2 3