Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - LogicalNZ

Pages: [1] 2
1
General Support / Is there a way to save a SYSLOG query?
« on: July 06, 2020, 10:59:56 pm »
We have a customer who would like to be able to develop and save syslog queries (filters). At the moment they are having to re-enter them every time they wish to use them.

Is there a way to do this?

2
So the issue I have is when a user connects to a vpn these interfaces are created and then the monitoring starts, which is fine.

The issue is that when the user disconnects from the vpn these interfaces become in a unknown start until they drop off. Thats fine as well, but when they move into the unknown state they produce an alarm (thats what I want to stop happening).

One of the options I have have put to me is to stop monitoring tunnel interfaces in the EPP all together, the issue with this approach is that I have a number of tunnel interfaces that I do want to monitor, its just the dynamic tunnel interfaces that I don't want to monitor.

The dynamic interfaces are identified by the following OID's

 .1.3.6.1.2.1.31.1.1.1.6.[greater than 1000] and .1.3.6.1.2.1.31.1.1.1.10.[greater than 1000]

So my thought to to create some type of script to look for these OID's and tell netXMS not to alert on the interface going to a unknown state.

I hope that makes it clearer :)

With thanks

3
General Support / Invalid Subnet Issues
« on: March 31, 2020, 09:05:50 am »
The more I use this the more I'm getting frustrated with it!

how do you tell netXMS to ignore the sub-net address?

I use 172.16.X.X with a /24 which seems to cause NetXMS to alarm. I have looked in the EPP rules and cant see anything? How to I turn this off please?

With thanks


4
Hey all,

I'm a little lost, I need to write e EPP script to filter an OID Address.

The address range I want to filter is:

.1.3.6.1.2.1.31.1.1.1.6.[filter < 1000] and .1.3.6.1.2.1.31.1.1.1.10.[filter < 1000]

Can anyone help me with this please?

With thanks

Alan Scott

5
General Support / Re: Event Processing Filtering Script
« on: March 17, 2020, 05:35:07 am »
Hey all,

I'm looking to want to do a EPP filter script based on a OID.

So my base OID =  .1.3.6.1.2.1.31.1.1.1.10.XX

Where XX >  15000000

Any ideas?

With thanks

6
General Support / Multiple DCI's to the same IP Address (How to?)
« on: March 06, 2020, 01:35:50 am »
Hey Guys,

I have a router that I'm NATing SNMP to multiple devices inside a customers network. I have used PAT change the SNMP Port for the different devices. The issue I have is when I try to configure a second Node to the same IP address (with a different port), NetXMS tells me I'm not allowed to do this :(

How do you do this?

With thanks

7
General Support / Re: DCI Table trasform Script help please
« on: February 26, 2020, 03:26:35 pm »
What I'm after is to change the output from these two columns to be the result * 8 and Average delta per second.

This transform only to effect "bytes-in" and "bytes-out" columns in the table.

8
General Support / DCI Table trasform Script help please
« on: February 24, 2020, 03:37:02 pm »
Hey all,

I'm trying to get a transform script working on my interface table (I'm not very good at scripting).

This is what I have at the moment:
Code: [Select]
idxbin = $1->getColumnIndex("bytes-in");
idxbout = $1->getColumnIndex("bytes-out");

for (i=0;i<rowCount;i++)
{
  $1->set(i,idxbin,$1->get(i,idxbin * 8);
  $1->set(i,idxbout,$1->get(i,idxbout * 8);
}


My columns are "bytes-in" and "bytes-out" and are in octets. Is this correct and also how do I set the transform script to be Delta per second?

A little lost and any help would be gratefully accepted...

How do I get rid of them god dam stupid faces!!!



9
General Support / DCI Tables
« on: February 17, 2020, 03:41:11 am »
Hey Team,

I'm a bit of a newbie but wanting a steer in the right direction, please. I started using manual single DCI's but soon came to the realisation there had to be a better way!

I then found DCI Tables (Very cool!), but are having issues making them behave as expected.

1. How do you execute a transformation based only of a single column of data? (Example I have a table called "interfaces" one for the columns is in Bytes-in (Octets), I need to transform to get bytes * 8?

2. When I create a single DCI interface for reading, Netxms nicely seems to list the correct multiplier (either K on M) it seems that when using a table this is not done. How to do you get the table to display as the single DCI would do?


with thanks


10
General Support / Re: Issue with Alarm (Newbee) /2 ?
« on: October 18, 2017, 11:01:05 pm »
Thanks Victor,

I have deleted that reconfigured the Node in NetXMS with the same issue. I have searched the router (MikroTik) and have no /2 subnets and networks so are a little lost :(


11
General Support / Re: Agent to NetXMS connection Issues
« on: October 18, 2017, 09:50:25 pm »
Ok, I think I'm making progress......

Our NetXMS server is in our datacentre and I have found it seems to have no problem with connecting to a agent in the DC. Our offices are remote to the DC and connected via a VPN. When I pole a machine in my offices the log shows the following error;

19-Oct-2017 07:40:36.117] [INFO ] NetXMS Agent started
[19-Oct-2017 07:42:35.820] [DEBUG] Incoming connection from 14.1.61.XX
[19-Oct-2017 07:42:35.820] [DEBUG] Connection from 14.1.61.XX rejected
[19-Oct-2017 07:43:29.173] [DEBUG] Incoming connection from 14.1.61.XX
[19-Oct-2017 07:43:29.173] [DEBUG] Connection from 14.1.61.XX rejected

So 14.1.61.XX is my offices external IP address. I would say there is some type of IP filtering on the agent that I need to allow the NetXMS server in?

How do I do this?

With thanks (By the way Fantastic product!!!)  - would love to do some training on NetXMS


Update: Fixed by adding MasterServers = 14.1.61.XX in my agent config file :)

12
General Support / Re: Agent to NetXMS connection Issues
« on: October 18, 2017, 04:13:47 am »
Further to my post.

I have worked out it is connecting, just not getting any details.

[18.10.2017 14:11:16] **** Poll request sent to server ****
[18.10.2017 14:11:16] Poll request accepted
[18.10.2017 14:11:17] Starting interface names poll for node Alan-PC
[18.10.2017 14:11:17]    Unable to get interface list from node
[18.10.2017 14:11:17] Finished interface names poll for node Alan-PC
[18.10.2017 14:11:17] **** Poll completed successfully ****

Here is another server with the same issue I have a agent installed on;

[18.10.2017 14:15:53] **** Poll request sent to server ****
[18.10.2017 14:15:53] Poll request accepted
[18.10.2017 14:15:53] Starting configuration poll for node LSD-Test
[18.10.2017 14:15:53] Checking node's capabilities...
[18.10.2017 14:15:53]    Checking NetXMS agent...
[18.10.2017 14:15:58] Capability check finished
[18.10.2017 14:15:58] Checking interface configuration...
[18.10.2017 14:15:58] Unable to get interface list from node
[18.10.2017 14:15:58] Interface configuration check finished
[18.10.2017 14:15:58] Checking node name
[18.10.2017 14:15:58] Node name is OK
[18.10.2017 14:15:58] Finished configuration poll for node LSD-Test
[18.10.2017 14:15:58] Node configuration was not changed after poll
[18.10.2017 14:15:58] **** Poll completed successfully ****



What would cause this to fail? It's almost like the NetXMS server cannot get any details from the agent service?

13
General Support / Agent to NetXMS connection Issues
« on: October 18, 2017, 03:41:57 am »
Hey All,

Firstly I'm a newbee to NetXMS.

I'm having issues making the agents work. I have installed the agents on 2 x Windows boxes (64bit version). When I add the Node, it does add the Node by comes up with NIC as unknown and looks like the NetXMS cannot communicate to the agents. From the NetXMS server I can ping the machines with the Agents installed no problem.

What am I missing???

Thanks

14
General Support / Issue with Alarm (Newbee) /2 ?
« on: October 17, 2017, 01:18:02 am »
I have a problem where I get error reports that state my network should be a /2 rather than a /24 (which is correct).

What do I do to resolve this please?

With thanks

15
General Support / Minor Error reporinted on a router "Invalid Netmask"
« on: September 01, 2017, 05:47:58 am »
Hey all,

I have a Mikrotik router when I configure the node, I get an error on one of the VLANS.

"Invalid network mask /24 on interface xyzVALN, should be /2"

little lost as the netmask is actually /24 and that is correct - what causes this?

With thanks

Pages: [1] 2