News:

We really need your input in this questionnaire

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - jds

#1
General Support / Re: Asterisk Subagent
January 31, 2023, 11:14:36 PM
Thank you for all the help! I was able to get the deb package installed after installing a prerequisite for it which then allowed me to install the subagent. Now I just have to figure out the freepbx/asterisk config to allow this to work  :D
#2
General Support / Re: Asterisk Subagent
January 31, 2023, 03:52:38 PM
Ubuntu 22.04.1 LTS

We also tried building from source on a Centos 7 server and got a similar error for the same file.
#3
General Support / Asterisk Subagent
January 30, 2023, 11:33:41 PM
I was trying to install the asterisk subagent on ubuntu from .deb package. I ran the command 'sudo apt install netxms-agent-asterisk' and it finds the subagent but it gives the error "netxms-agent-asterisk : Depends: libexosip2-11 but it is not installable". I have tried install libexosip2-11 but it's not found. Any help would be appreciated.
#4
General Support / WebAPI custom attribute filter
December 05, 2022, 09:41:57 PM
Good day all, I have been trying to use the webapi to filter objects with a particular custom attribute name. Everything I have tried either comes back with all the objects or empty. Reading the documentation I assumed the url to call this is API_BASE/objects?@custom_attribute_name={insert attribute name}. I'm thinking I have a formatting problem but I'm not sure. I am using an Admin account to call the API so permissions shouldn't be an issue. Any help would be appreciated. Thank you
#5
General Support / Error importing Cisco Firewall MIBs
August 16, 2022, 08:44:06 PM
I am trying to import the Cisco Firepower MIBs and I keep getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on one of the files that seems to be needed for other MIBs. I say seems to be needed because I tried removing the file and started getting messages that the MIB doesn't exist. I have uploaded the MIB that is causing the problem. If I find a solution (which I have been trying to do) I will update this post but any help would be appreciated. Thank you
#6
General Support / Error importing Cisco Firewall MIBs
August 16, 2022, 07:12:46 PM
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB. I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.

Thank you
#7
General Support / Error importing Cisco Firewall MIB
August 16, 2022, 07:11:05 PM
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB. I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.

Thank you
#8
General Support / Error import Cisco Firewall MIB
August 16, 2022, 07:10:35 PM
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB. I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.

Thank you
#9
General Support / Error import MIB for Cisco Firewalls
August 16, 2022, 07:09:52 PM
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB (I uploaded the MIB text file below). I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.

Thank you
#10
General Support / Problem Import Cisco Firepower MIBs
August 16, 2022, 07:08:36 PM
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB (I uploaded the MIB text file below). I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.

Thank you
#11
We are monitor some W3SVC_W3WP counters in netxms. The counters have a name format such as PID_APPPOOL. I was able to remove the PID from {instance-name} but if I remove it from {instance} the DCI doesn't work anymore. When the service restarts there is a new PID generated which creates a new DCI with the same {instance-name} but a different {instance}. What I would like to see if it's possible, is somehow keep the same DCI but allow the PID to change. The problem is we lose historical data when the new DCI is created and the old one ages out. Does anyone know of a solution for this?
#12
I have been trying to get the new web interface (war) working in our system. Our webserver is on a different server from the netxms server itself. With the old webserver we had the nxmc.properties file to set the server= parameter but with the new interface when I try to log in I get a "Connection Refused" response instead of logging in. I can log in if I change back to the legacy war file.
#13
General Support / Set Node data values
June 14, 2022, 04:31:38 PM
We have some devices that are SNMP but don't set the vendor, product name, etc via SNMP. They do state it in the SNMP description. I have parsed the snmp description to get me the info I need but I can't figure out if I can set the vendor, product name, etc via the configuration poll script. Is there a way I can set the info via the script?

Thank you,
Josh
#14
General Support / LDAP Sync Invalid Credentials
April 13, 2022, 05:49:23 PM
Hello,

Our server is spamming an alarm for Invalid Credentials on LDAP sync but I can't figure out what is wrong in my LDAP setup. It was previously working and I just recently noticed the alarms. I have made the user a domain admin, I have reset its password in the domain. I'm at a loss and any help would be appreciated.


LDAP.ConnectionString       ldap://{dc server}:389
LDAP.GroupClass               group
LDAP.GroupUniqueID         objectGUID
LDAP.SeachBase               {OU of users in domain}
LDAP.SearchFilter              (objectClass=*)
LDAP.SyncUser                 {distingushed name of user in domain}
LDAP.SyncUserPassword    {sync user password}
LDAP.UserClass                 user
LDAP.UserUniqueID           objectGUID
#15
General Support / Re: Web API on external linux server
February 24, 2022, 05:27:04 PM
I found the issue, I had an typo and left an s off of the "netxms.server.address" line. Its working now. Sorry for the inconvenience.