Allright, here goes
--------------------------------------------------------------------------------------------
DCI 1: BLACK TONER (this one works)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.1
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
DCI 2: CYAN TONER (this one works as well)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.2
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
DCI 3: MAGENTA TONER (This one does NOT workl)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.3
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
DCI 3: YELLOW TONER (This one does NOT workl)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.4
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
I have set the threshold really high on the DCI'S, I was testing to make sure that an alert would be triggered, I tried putting them on an interval of 10 seconds, I disabled all DCI'S but the ones I was testing.
I hope you see something wrong because I can't find the problem
--------------------------------------------------------------------------------------------
DCI 1: BLACK TONER (this one works)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.1
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
DCI 2: CYAN TONER (this one works as well)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.2
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
DCI 3: MAGENTA TONER (This one does NOT workl)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.3
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
DCI 3: YELLOW TONER (This one does NOT workl)
TYPE: SNMP
OID : .1.3.6.1.4.1.2001.1.1.1.1.100.3.1.1.3.4
DATATYPE: Integer
INTERVAL: 3600
THRESHOLD:
LAST POLLED VALUE will be LESS OR EQUAL than 10
If true execute: X_TONER
If false exectue: X_TONER_NORMAL
GRAPH (it gets turned off a lot so I selected the data it did collect):
--------------------------------------------------------------------------------------------
I have set the threshold really high on the DCI'S, I was testing to make sure that an alert would be triggered, I tried putting them on an interval of 10 seconds, I disabled all DCI'S but the ones I was testing.
I hope you see something wrong because I can't find the problem