NetXMS Support Forum

Спасибо. Настроим перезапуск по крону.

Oracle 11.

Создал дашбоард.
В нем line chart.
Добавил 16 элементов.
В лог посыпалась ошибка:

INSERT INTO dashboard_elements (dashboard_id,element_id,element_type,element_data,layout_data) VALUES (142571,0,1,'
___Много_строк_xml____
')"): ORA-01704: string literal too long

Похоже при INSERT оракл использует varchar2, c лимитом в 4000 символов.
На форумах рекомендуют использовать приведение типов:
to_clob( 'value of 1500 characters' )

Как можно исправить?

Можно ли автоматизировать discovery удаленного site, если там установлен сервер? Через те же зоны.
Идеально было бы иметь возможность получить не только алерты, но и топологию, показатели, историю и проч. с удаленного сервера.
Когда увидил зонирование, сразу подумал, что это реализовано, а тут крах всех надежд

У кого-либо возникают подобные ошибки?

Обнаружил несколько устройств, у которых primary_ip - Broadcast адрес сети.
Это ошибка моей конфигурации или все же проверка на broadcast не осуществляется?

Так же заметил, что по каждому интерфейсу создалась отдельная нода

Обнаружил, что по snmp не заполняются адреса интерфейсов на циске.

QuoteSNMP Object ID=.1.3.6.1.4.1.9.12.3.1.3.612

Заметил следующее:
в OID .1.3.6.1.2.1.4.34.1.2 пусто.
Вся информация по адресам находится в .1.3.6.1.2.1.4.20.1.1

Возможно ли исправить?

Попробуйте протестировать отправку сообщения используя telnet, как указано на вики:
http://ru.wikipedia.org/wiki/SMTP#.D0.9F.D1.80.D0.B8.D0.BC.D0.B5.D1.80_.D0.BF.D1.80.D0.BE.D1.81.D1.82.D0.B5.D0.B9.D1.88.D0.B5.D0.B9_SMTP-.D1.81.D0.B5.D1.81.D1.81.D0.B8.D0.B8

Подумал.
Подключил субагенты.
ServiceCheck.HTTP заработал.

Обнаружил в логе большое количество ошибок:
...
...
[16-Jun-2014 16:03:42.590] [DEBUG] * Syncer * Unable to delete object with id 115018 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.590] [DEBUG] * Syncer * Unable to delete object with id 115019 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.590] [DEBUG] * Syncer * Unable to delete object with id 115020 because it is being referenced 12 time(s)
[16-Jun-2014 16:03:42.677] [DEBUG] * Syncer * Unable to delete object with id 115781 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.677] [DEBUG] * Syncer * Unable to delete object with id 115786 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.791] [DEBUG] * Syncer * Unable to delete object with id 117912 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.791] [DEBUG] * Syncer * Unable to delete object with id 117913 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.809] [DEBUG] * Syncer * Unable to delete object with id 118928 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.809] [DEBUG] * Syncer * Unable to delete object with id 120795 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.809] [DEBUG] * Syncer * Unable to delete object with id 120796 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 120799 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 120800 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 120801 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 120802 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 120803 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 120804 because it is being referenced 13 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 121911 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.810] [DEBUG] * Syncer * Unable to delete object with id 121912 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 123238 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 123239 because it is being referenced 4 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 123241 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 123242 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 123243 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 123264 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 124560 because it is being referenced 3 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 124561 because it is being referenced 7 time(s)
[16-Jun-2014 16:03:42.828] [DEBUG] * Syncer * Unable to delete object with id 124588 because it is being referenced 3 time(s)
...
...

На сколько такие события критичны?

Перепробовал кучу вариантов. Все бестолку.
ServiceCheck.*
Вылетает.

Создание сервиса на ноде - постоянно возвращает статус "5".

Ничего не понимаю

На вики описаны почти все переменные:
http://wiki.netxms.org/wiki/Server_Configuration_Variables

Перерыл вики, не могу найти, как правильно создавать сетевые сервисы.
Мне надо проверять ftp, http,https, ssh.
Подскажите, где в документации описаны примеры заполнения полей Request и Response для каждого из протоколов?

You can use git or daily snapshot.

Quotehttp://wiki.netxms.org/wiki/Oracle#Latest_snapshot

But you can face with troubles in communication with nxmc or webinterface.

See indentation example on wiki:

Quote
http://en.wikipedia.org/wiki/Python_syntax_and_semantics#Indentation