NetXMS Support Forum

Добрый день!


Подскажите!!  Автоматически не выстраивается map layer2(((((( На нодах включены snmp, lldp  и cdp. На ноде, от кого строится map собрана информация в interface. В map -> properties -> map options поставлена галка include end note. В чем может быть проблема?

Hello everyone,

I've searched the forum and although I've found a few posts I haven't been able to find a solution for sending notification emails using the Office365 servers.

Example of my configuration:
Server=smtp.office365.com
[email protected]
Password=##########
Port=587
TLSMode=STARTTLS
RetryCount=1
FromName=Account Name
[email protected]
MailEncoding=utf8
IsHTML=yes


How did you encrypt the password? There's some help in the manual, but I'm not sure what kind of encryption Office365 uses.

Are these the right settings or is something missing? When i try to send a email i get DRIVER ERROR

qtech-olt is an old driver module, now it is called qtech. So what happened is that server attempted to load driver module built for old version, which had now incorrect references to other libraries.
If you are building server from source, make sure that before doing "make install" (or copying binaries to target machine) you removed everything from <install_prefix>/lib/netxms (/usr/local/lib/netxms in your case).

Best regards,
Victor

I was able to get the sever back up and running by isolating the qtech-olt.ndd into its own directory so it would not be loaded

See attached.. I guess I been used to doing it this way as prior not all features where enabled by default such as mqtt and a few others.

Maps were reworked in 5.0, but there are still some things to finalize before it's released. Release should happen within coming month.

Hi,

Out of curiosity, what are the reasons to build from source, as there are packages for Debian. But, chances are that it will also crash if installed from packages.

Can you please run it under gdb:
gdb --args netxmsd -D 6

then enter run
when it crashes, enter bt and show us the output

I usually build from source and have no problems but for some reason my server is now dead after installing 4.5.4 from source

Details
Debian 11
Postgres 13 with timescale db extension 2.10

database was upgraded via nxdbmgr successfully

running with -D 9  gives nothing of value last lines are 

Network device driver JUNIPER loaded successfully 
Network device driver NETSCREEN loaded successfully 
Segmentation fault

Hi,

Ever since I upgraded to v4.5.4 I've observed that changes made in maps (like creating a link, changing text box color etc.) are not getting saved sometimes. The problem is erratic. Please help to resolve this issue.

Thanks
Deep  

Thank you Filipp!

F.