RE: Templates & Services

Hi!

We have plans to implement more service checks. Alex can tell more on
this.

You can get something similar to preset graphs using save/restore
desktop functionality in administrator console. Do the following:

1. Open and setup any number of graphs in console.
2. Go to Desktop -> Save as
3. Enter name for your desktop configuration and press OK. Your current
desktop configuration will be saved to NetXMS server under your profile.
You can have unlimited number of saved desktop configurations.
4. You can restore your desktop configuration at any time by selecting
Desktop -> Restore from any workstation as long as you are logged in
with the same user account.

Your saved configurations may include not only graph windows, but also
alram browser and last values views.

Best regards,
Victor

> -----Original Message-----
> From: Rune Nilssen [mailto:rune_at_directconnect.no]
> Sent: Thursday, September 29, 2005 4:31 PM
> To: NetXMS Users
> Subject: Re: [netxms-users] Templates & Services
>
>
>
> Hi,
>
> In regards to templates, I would suggest allowing all
> possible client parameters to be selected. After all, theres
> always the risk that I apply some template to a node that
> cannot provide the given parameters. Thus I would suggest
> that inapplicable parameters silently fail.
>
> Thanks for explaining the service checks for me. They seem to
> work just fine now. About that, is there more service checks
> in the pipeline? In the past I've used Nagios for service
> checks and are quite happy with the vast amount of available
> modules there. Have you considered leaving default values ofr
> the request and response boxes? Ive been having a hard time
> trying to figure out what to put in the SSH service check.
> Any suggestions on that? Or any general advice about service checks?
>
> I've also been wondering about graphing. Is there planned any
> kind of graphwiev that allows me to browse a set of preset
> grahps? Or are there already a similar feature? Currently Im
> using cacti to graph various data. Cacti lets me in a very
> easy manner browse a large set of graphs searching for
> abnormalities aswell as assist me in estimating when various
> link needs to be upgraded.
>
>
> Med vennlig hilsen
> Rune Nilssen
> rune_at_directconnect.no
>
> -----Opprinnelig melding-----
> Fra: Victor Kirhenshtein [mailto:victor_at_opticom.lv]
> Sendt: 29. september 2005 12:39
> Til: NetXMS Users
> Emne: Re: [netxms-users] Templates & Services
>
>
> Hello!
>
> 1. Idea of "Select" button for agent parameters is to show
> parameters supported by particular agent. Because template
> does not represents any specific node, there are no way to
> determine what parameters should be shown. "Move to
> template..." function was created as a solution to this
> problem. However, any suggestions how to do parameter
> selection for templates in a logical way are very welcome.
> Support for importing/exporting templates is in the
> development and should be implemented in next release.
>
> 2. Service checks is done by separate subagent, which you
> should load at least on your management server. Also, if you
> set node1 as a "poller node" for node2, you should load
> portchecker subagent on node1 as well. To load portchecker
> subagent, add the following to your agent's configuration file:
>
> SubAgent = /opt/lib/libnsm_portCheck.so
>
> Also, I recommend you to add 127.0.0.1 to list of master
> servers on agent on your management server.
>
> Hope this helps!
>
> Best regards,
> Victor
>
> > -----Original Message-----
> > From: Rune Nilssen [mailto:rune_at_directconnect.no]
> > Sent: Thursday, September 29, 2005 1:16 PM
> > To: NetXMS Users
> > Subject: [netxms-users] Templates & Services
> >
> >
> >
> > Hi,
> >
> > 1) Templates
> > If I select a template in the object browser and select "Data
> > collection" and then try to add a new item I get an error
> > message saying "Error retrieving supported parameters:
> > Incompatible operation" when I push the Select button in the
> > "Data Collection Item"-dialogue box. Is this intentional? As
> > far as I can tell the only way I can add new data items to a
> > template is by first adding them to one of the nodes using
> > this template and then use the "Move to template..." option.
> > Is this correct?
> >
> > Also, is there any support for importing pre-made template
> > sets or anything similar?
> >
> >
> > 2) Services
> > I cant fully figure out how services work. I added a HTTP
> > service type check to a server Im testing, set a request and
> > an expected response as described by Alex Kirhenshtein in
> > http://www.netxms.org/archive/netxms-users/0020.html. However
> > when I select the node and choose Poll->Status the following
> > shows in the poll window:
> >
> > Starting status poll on network service HTTP server
> > Current status is Unknown
> > Polling service from node somenode.directconnect.no
> > [82.148.160.xxx]
> > Unable to check service status due to agent or
> > communication error
> > Finished status poll on network service HTTP server
> >
> > Agent configuration is as follows:
> >
> > MasterServers = 82.148.160.xxx
> > LogFile = /var/log/nxagentd.log
> > RequireAuthentication = yes
> > RequireEncryption = yes
> > SharedSecret = somesecret
> > FileStore = /var/nxagentd
> > SubAgent = /opt/lib/libnsm_linux.so
> >
> > Any suggestions on what I should check?
> >
> >
> >
> > Best regards,
> > Rune Nilssen
> > rune_at_directconnect.no
> >
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.344 / Virus Database: 267.11.8/113 - Release
> > Date: 27.09.2005
> >
> >
> >
>
>
Received on Thu Sep 29 2005 - 16:53:49 EEST