Re: Service polling issues

Hi,

Thanks for all the help ssh service monitoring works perfectly :) The only
new problem i'm facing is that ftp monitoring doesn't seem to work(status:
UNKNOWN) . I'm guessing something needs to be added to the request and
expected response fields ?

Tnx,

Luc

On 12/1/05, Victor Kirhenshtein <victor_at_opticom.lv> wrote:
>
> Hi,
>
> yes, you can run nxagentd on the management server and poll remote
> service. Actually, it's a default configuration for service poller. Don't
> forget to load port checker subagent by adding
>
> SubAgent = <your_netxms_lib_dir>/libnsm_portCheck.so
>
> line to your nxagentd.conf.
>
> Best regards,
> Victor
>
> -----Original Message-----
> *From:* luc Van Hoeylandt [mailto:lucvht_at_gmail.com]
> *Sent:* Thursday, December 01, 2005 7:06 PM
> *To:* NetXMS Users
> *Subject:* Re: [netxms-users] Service polling issues
>
> Tnx for the info,
>
> Would it be possible to run nxagentd on the server that runs netxmsd and
> use that to poll the remote ssh service ? Or this there no other way then
> to install the nxagent on the machine itself ?
>
> Regards,
>
> Luc
>
> Near future netxms user :)
>
> On 12/1/05, Igor Kopman <igor.kopman_at_ctco.lv> wrote:
> >
> > Hi,
> >
> >
> >
> > AFAIK You need service checker subagent to be complied and added into
> > configuration of agent (if guys didn't implement it as part of core agent
> > yet).
> >
> > At least in our environments only nodes with "Service Checker" subagent
> > do the service polls.
> >
> >
> >
> > Regards,
> >
> > Igor Kopman,
> >
> > NetXMS user ;)
> >
> >
> > ------------------------------
> >
> > *From:* luc Van Hoeylandt [mailto:lucvht_at_gmail.com]
> > *Sent:* Thursday, December 01, 2005 6:45 PM
> > *To:* NetXMS Users
> > *Subject:* [netxms-users] Service polling issues
> >
> >
> >
> > Hi,
> >
> > I have installed netxmsd on a debain sarge box and i am using the netxms
> > console on windows xp to configure it. Monitoring through smnp seems to work
> > fine. But adding services to a node (ssh for example) always results in
> > status unknown, doing a manual poll -> status on the node shows:
> >
> > Statring status poll on network service ssh
> > current status is unknown
> > polling service from node xxx.xxx.xxx.xxx
> > unable to check service status due to agent or communication error
> > finished status poll on network service ssh
> >
> > Manually connecting to the ssh server from the monitor server works, the
> > ssh server runs on port 8022 but i have updated this in the service TCP/UDP
> > port settings as well
> >
> > Any clues what i'm doing wrong ?
> >
> > Regards,
> >
> > Luc
> >
> >
>
Received on Fri Dec 02 2005 - 18:01:29 EET