Re: Service polling issues

Hello.

Ftp check are not implemented jet. For now you can use "User defined".
This check also in almost-unimplemented state, it just connects to
requested host/port, but at least you'll see if ftpd still acceptig
connections. Maybe i'll add support for ftp protocol in upcoming release.

luc Van Hoeylandt wrote:
> Hi,
>
> Thanks for all the help ssh service monitoring works perfectly :) The only
> new problem i'm facing is that ftp monitoring doesn't seem to work(status:
> UNKNOWN) . I'm guessing something needs to be added to the request and
> expected response fields ?
>
> Tnx,
>
> Luc
>
> On 12/1/05, Victor Kirhenshtein <victor_at_opticom.lv> wrote:
>
>>Hi,
>>
>>yes, you can run nxagentd on the management server and poll remote
>>service. Actually, it's a default configuration for service poller. Don't
>>forget to load port checker subagent by adding
>>
>>SubAgent = <your_netxms_lib_dir>/libnsm_portCheck.so
>>
>>line to your nxagentd.conf.
>>
>>Best regards,
>>Victor
>>
>> -----Original Message-----
>>*From:* luc Van Hoeylandt [mailto:lucvht_at_gmail.com]
>>*Sent:* Thursday, December 01, 2005 7:06 PM
>>*To:* NetXMS Users
>>*Subject:* Re: [netxms-users] Service polling issues
>>
>>Tnx for the info,
>>
>>Would it be possible to run nxagentd on the server that runs netxmsd and
>>use that to poll the remote ssh service ? Or this there no other way then
>>to install the nxagent on the machine itself ?
>>
>>Regards,
>>
>>Luc
>>
>>Near future netxms user :)
>>
>>On 12/1/05, Igor Kopman <igor.kopman_at_ctco.lv> wrote:
>>
>>> Hi,
>>>
>>>
>>>
>>>AFAIK You need service checker subagent to be complied and added into
>>>configuration of agent (if guys didn't implement it as part of core agent
>>>yet).
>>>
>>>At least in our environments only nodes with "Service Checker" subagent
>>>do the service polls.
>>>
>>>
>>>
>>>Regards,
>>>
>>>Igor Kopman,
>>>
>>>NetXMS user ;)
>>>
>>>
>>> ------------------------------
>>>
>>>*From:* luc Van Hoeylandt [mailto:lucvht_at_gmail.com]
>>>*Sent:* Thursday, December 01, 2005 6:45 PM
>>>*To:* NetXMS Users
>>>*Subject:* [netxms-users] Service polling issues
>>>
>>>
>>>
>>>Hi,
>>>
>>>I have installed netxmsd on a debain sarge box and i am using the netxms
>>>console on windows xp to configure it. Monitoring through smnp seems to work
>>>fine. But adding services to a node (ssh for example) always results in
>>>status unknown, doing a manual poll -> status on the node shows:
>>>
>>>Statring status poll on network service ssh
>>>current status is unknown
>>>polling service from node xxx.xxx.xxx.xxx
>>>unable to check service status due to agent or communication error
>>>finished status poll on network service ssh
>>>
>>>Manually connecting to the ssh server from the monitor server works, the
>>>ssh server runs on port 8022 but i have updated this in the service TCP/UDP
>>>port settings as well
>>>
>>>Any clues what i'm doing wrong ?
>>>
>>>Regards,
>>>
>>>Luc
>>>
>>>
>>
>

-- 
Alex Kirhenshtein
C.T.Co
Cellular: +371-9145688