Re: Adding hosts via discovery - needassistance

Awesome, I will upgrade immediately.

--------------------------------------
Tim Moore
614.387.8197
Network Operations Center
ODJFS

>>> victor_at_opticom.lv 11/16/2006 12:07:26 PM >>>

Hello!

Most likely, NetXMS server does not have a seed device, i.e. device
which is connected to the subnet in question and is manageable. To
simplify this, I suggest to upgrade to new version - 0.2.14, and
enable
active discovery for this subnet. You can do this via Control
Panel->Network Discovery - select "Active and passive" discovery mode,
and on Active Discovery Targets tab, enter your test subnet. This
should
instruct NetXMS to check every IP address in subnet and add nodes
which
passes filter script to the system. You can also look for
SYS_NODE_ADDED
events to see when new node is added, or add a rule to event policy to
show an alarm for every added node.

Best regards,
Victor

> -----Original Message-----
> From: TIM MOORE [mailto:MOORET10_at_odjfs.state.oh.us]
> Sent: Tuesday, 14 November, 2006 22:59
> To: netxms-users_at_alk.lv; Victor Kirhenshtein
> Subject: Re: [netxms-users] Adding hosts via discovery -
> needassistance
>
>
> How can you tell if it is running? I'm not seeing any
> devices at this point. I changed the filter to read what you
> said. I'll let it run for a bit.
>
> --------------------------------------
> Tim Moore
> 614.387.8197
> Network Operations Center
> ODJFS
>
> >>> victor_at_opticom.lv 11/14/2006 1:55:43 PM >>>
> Hello!
>
> The only problem I see is that you need to set
> DiscoveryFilter to Filter::Subnet instead of simply Subnet.
>
> Best regards,
> Victor
>
>
> -----Original Message-----
> From: TIM MOORE [mailto:MOORET10_at_odjfs.state.oh.us]
> Sent: Monday, 13 November, 2006 20:01
> To: NetXMS Users
> Subject: [netxms-users] Adding hosts via discovery - need assistance
>
>
> I sent a request to the user list before regarding discovery,
> but I never heard any response. I've been having trouble
> trying to get a Linux agent to do the network discovery. I
> have a linux box with the agent loaded and I can talk to the
> agent via the server console. I tried creating the below
> script for my network discover. I just want to try this on
> one subnet first before unleashing on our 10-net.
>
>
>
> I then went to the Server Configuration page and changed the
following
> values:
>
> DiscoveryFilter - Subnet
> RunNetworkDiscover - 1
>
> See my Server configuration page below:
>
>
>
>
>
> I tried restarting the service but it never seems to begin
> discovery. I think I need to link up the command to run this
> discovery with an agent, but I'm not sure how.
>
> Thanks,
>
>
>
> --------------------------------------
> Tim Moore
> 614.387.8197
> Network Operations Center
> ODJFS
>
> This e-mail message, including any attachments, is for the
> sole use of the intended recipient(s) and may contain
> private, confidential, and/or privileged information. Any
> unauthorized review, use, disclosure, or distribution is
> prohibited. If you are not the intended recipient, employee,
> or agent responsible for delivering this message, please
> contact the sender by reply e-mail and destroy all copies of
> the original e-mail message.
>
>
>
>
>
> This e-mail message, including any attachments, is for the
> sole use of the intended recipient(s) and may contain
> private, confidential, and/or privileged information. Any
> unauthorized review, use, disclosure, or distribution is
> prohibited. If you are not the intended recipient, employee,
> or agent responsible for delivering this message, please
> contact the sender by reply e-mail and destroy all copies of
> the original e-mail message.
>
>

This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.
Received on Thu Nov 16 2006 - 20:14:11 EET