Text only | Text with Images

NetXMS Support Forum

English Support => General Support => Topic started by: vineeshkumarpv on January 31, 2011, 04:18:22 PM

Title: Need hardware sizing data of Netxms server
Post by: vineeshkumarpv on January 31, 2011, 04:18:22 PM
Hi Gurus,
  I need to configure 100 agent based nodes on netxms. Any one having the data that, what hardware configuration is required for a server to support 100 agent based nodes? How much RAM and CPU needed?
Title: Re: Need hardware sizing data of Netxms server
Post by: Dan on February 03, 2011, 06:54:49 PM
Hi!

It all comes down to the amount of DCI's you wish to poll and the polling intervals.

We are using the following CPU and RAM for around 800 nodes with, at the moment, about 25 - 30 DCI's per node,
1x Intel(R) Xeon(R) CPU W3520
12GB RAM

And we are not close to maximizing the resources.

Hope this helps!

Edit: We would probably be able to handle the current load with half the memory, but as you never know what the future hold, and as hardware is relative cheap, it is better to oversize, than to not be able to monitor what you need to :)

Best regards,
Dan
Text only | Text with Images