I am trying to move away from TheDude and testing out NetXMS.
Is it possible to setup a nodes and then monitor a range of ports, lets say 21, 80, 443 to see if they are open? If they arent report back?
I don't want to use the agent as there are hundreds of servers that i want to check certain ports on.
I am trying to move away from TheDude and testing out NetXMS.
Is it possible to setup a nodes and then monitor a range of ports, lets say 21, 80, 443 to see if they are open? If they arent report back?
I don't want to use the agent as there are hundreds of servers that i want to check certain ports on.
Is there a way i can monitor certain ports on windows / linux devices? for example if wanted to check if certain ports were open? i dont want to use an agent though as i have hundreds of servers.
Is there a way i can monitor certain ports on windows / linux devices? for example if wanted to check if certain ports were open? i dont want to use an agent though as i have hundreds of servers.
Обзоры онлайн казино на https://panferoff.su - Слоты, блэкджек, рулетка
Официальные игровые автоматы тут https://vostokova.ru/
Играть с выводом денег на карту (https://bestu21.ru/)
Приветственные бонусы (https://sportbox54.ru/)
Игры казино на реальные деньги (https://fastandroid.ru/)
Лучшие онлайн-казино в 2022 на https://psoriaze.ru/
Казино с реальными выплатами тут https://molala.ru
Игровые автоматы без регистрации (https://avtospareparts.ru/)
Играть слоты (https://vias-expo.ru/)
Сайт игровых автоматов (https://lee-hyo-jong.ru/)
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB (I uploaded the MIB text file below). I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.
Thank you
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB (I uploaded the MIB text file below). I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.
Thank you
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB. I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.
Thank you
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB. I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.
Thank you
All, I am trying to import the Cisco Firepower Firewall MIBs and I'm getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on CISCO-FIREPOWER-TC-MIB. I thought I could just remove it and reimport but it seems that file is referenced by other Firepower MIBs. If I find an answer I'll update this post but any help would be appreciated.
Thank you
I am trying to import the Cisco Firepower MIBs and I keep getting the error message: "ERROR 003: Parser error - memory exhausted in line 14112" on one of the files that seems to be needed for other MIBs. I say seems to be needed because I tried removing the file and started getting messages that the MIB doesn't exist. I have uploaded the MIB that is causing the problem. If I find a solution (which I have been trying to do) I will update this post but any help would be appreciated. Thank you
Игровые автоматы и слоты - Играйте бесплатно и без регистрации - Только лицензионный софт - Мобильная версия слотов - Все провайдеры на одном сайте - https://fremgroup.ru/
Игры онлайн казино тут https://pitersot.ru
Игры онлайн казино (https://a-11.ru/)
Играть бесплатно без демо игровые автоматы (https://forma42.ru/)
Казино играть регистрация (https://fintech-cup.ru/)
Игровые автоматы играть бесплатно онлайн здесь https://bikeset.ru/
Рейтинг честных онлайн казино на реальные деньги с моментальным вводом выигрышей. Играть в онлайн казино с контролем честности MD5, хорошей отдачей, выгодными бонусами и проверенной лицензией здесь https://cdek-logistic.ru
Игровые автоматы с реальным выводом (https://orgsad.ru/)
Игровые автоматы с выводом реальных денег (https://b-i.su/)
Казино играть регистрация (https://sauna-valkiriya.ru/)
ТОП-10 казино онлайн. Рейтинг сайтов и Список лучших на https://activelifenutrition.ru/
Можно ли в виртуальном онлайн казино выиграть реальные деньги? Конечно да! У нас на https://arena-print.su/ список игровых заведений с быстрым выводом средств сразу на карту. Играйте без регистрации с бонусом и получайте призовые даже без вложений!
Казино с выводом (https://liksamara.ru/)
Надежные казино (https://zanotti-ts.ru/)
Скачать игровые автоматы (https://mobilemoms.ru/)
Дизайн человека Построить карту с расшифровкой (http://metahd.ru/)
Рассчитать карту Дизайн человека на русском + Расшифровка (http://metahd.ru/)
Хьюмен Дизайн человека Расшифровка карты рассчитать с расшифровкой (http://metahd.ru/)
Рейв карта Дизайн человека Расшифровка карты расшифровка (http://metahd.ru/)
Дизайн человека Расшифровка карты рассчитать с расшифровкой на русском (http://metahd.ru/)
PDFрасшифровка. Расшифровка карты Дизайн человека (http://metahd.ru/)
Name: &Connect->Chrome HTTP
Command: chrome.exe --app=https://%u
I have created a DCI template to poll ifHCInOctets & ifHCOutOctets via SNMP to Siklu radios. I based this template on my ability to open up that device / node right click on Eth0 and "Create data collection items".
However, I am not getting the same data from the DCI template as I am getting from the "Create data collection items".
The right click option apparently, somehow, realizes that this data is time based - it is not a total count, but a count since X. The DCI template does not seem to realize this, and is reporting much larger numbers (total numbers of octets ever passed VS number of octets passed since X)
How can I replicate what the right click option is doing in my dci template? I have bene through the options multiple times and nothing is jumping out at me....
Thanks!
I have created a DCI template to pull metrics via snmp from Eth0 on a Siklu radio. I replicated the template OID's from the right click menu option "create data collection items".
However, the DCI template appears to be unaware that the data is presented as 'packets from time X' and not 'all packets transferred ever on this interface' in order to display the current bandwidth on the link.
How do I replicate what "create data collection items" does in my DCI template? I have gone through all the options and not found anything different between a radio Eth0 port via the template and creating it manually.
Thanks!
fff
test