Attached is the export requested
- Welcome to NetXMS Support Forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
General Support / Re: Fortiswitch topology?
June 01, 2026, 07:06:52 AM
thank you! 
HW inventory looks ok to me, but ports view seems borked.
HW inventory looks ok to me, but ports view seems borked.
#3
General Support / Re: Fortiswitch topology?
May 29, 2026, 07:13:38 AM
Hello,
thank you very much. I'm sure something can be arranged, would this be about snmp access or something more.
In the meanwhile I've uploaded the info asked for, I've used nxsnmpwalk/get if that ok, data is from a fortiswitch 1024E.
thank you,
regards
thank you very much. I'm sure something can be arranged, would this be about snmp access or something more.
In the meanwhile I've uploaded the info asked for, I've used nxsnmpwalk/get if that ok, data is from a fortiswitch 1024E.
thank you,
regards
#4
General Support / Fortiswitch topology?
May 21, 2026, 06:11:46 PM
Hello,
I seem to have issues to get topology info out of our Fortiswitches, one thing i noticed compared to our cisco is the Interface showing [ 0] in the FDB tab of the switches.
Not sure where to start really, including maybe relevant topology info from the log file
thank you
I seem to have issues to get topology info out of our Fortiswitches, one thing i noticed compared to our cisco is the Interface showing [ 0] in the FDB tab of the switches.
Not sure where to start really, including maybe relevant topology info from the log file
thank you
Code Select
2026.05.21 16:40:51.115 *D* [topology.fdb ] NetworkDeviceDriver::getForwardingDatabase(SW03 [36061]): 0 entries read from dot1qTpFdbTable
2026.05.21 16:40:51.318 *D* [topology.fdb ] NetworkDeviceDriver::getForwardingDatabase(SW03 [36061]): 190 entries read from dot1dTpFdbTable
2026.05.21 16:40:51.318 *D* [poll.topology ] Switch forwarding database retrieved for node SW03 [36061]
2026.05.21 16:40:51.318 *D* [topology.link ] BuildLinkLayerNeighborList(SW03 [36061]): building link level topology
2026.05.21 16:40:51.318 *D* [topology.driver ] Collecting topology information from driver GENERIC for node SW03 [36061]
2026.05.21 16:40:51.318 *D* [topology.driver ] Driver for node SW03 [36061] cannot provide link layer topology information
2026.05.21 16:40:51.318 *D* [topology.lldp ] Collecting LLDP topology information for node SW03 [36061]
2026.05.21 16:40:51.365 *D* [topology.lldp ] 144 entries in LLDP-MIB connection database for node SW03 [36061]
2026.05.21 16:40:51.365 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW11 [35567]
2026.05.21 16:40:51.365 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=39
2026.05.21 16:40:51.365 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=39 doRemoteLookup=false
2026.05.21 16:40:51.365 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 39 not found in local LLDP port info cache
2026.05.21 16:40:51.365 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=39
2026.05.21 16:40:51.365 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW11 [35567]
2026.05.21 16:40:51.412 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.412 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=35567 (node) ifRemote=27 ifLocal=0
2026.05.21 16:40:51.412 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW12 [35601]
2026.05.21 16:40:51.412 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=40
2026.05.21 16:40:51.412 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=40 doRemoteLookup=false
2026.05.21 16:40:51.412 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 40 not found in local LLDP port info cache
2026.05.21 16:40:51.412 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=40
2026.05.21 16:40:51.412 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW12 [35601]
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.475 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=35601 (node) ifRemote=51 ifLocal=0
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindRemoteNode(SW03 [36061]): remoteIdSubType=macAddress(4) remoteId=4@7818EC6DA88D: FindNodeByLLDPId failed, fallback to interface MAC address ("78:18:EC:6D:A8:8D")
2026.05.21 16:40:51.475 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode FW05[31449]
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=42
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=42 doRemoteLookup=false
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 42 not found in local LLDP port info cache
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=42
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid and remote interface is not known
2026.05.21 16:40:51.475 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=31449 (node) ifRemote=21 ifLocal=0
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindRemoteNode(SW03 [36061]): remoteIdSubType=macAddress(4) remoteId=4@7818EC6DD00B: FindNodeByLLDPId failed, fallback to interface MAC address ("78:18:EC:6D:D0:0B")
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindRemoteNode(SW03 [36061]): remoteIdSubType=macAddress(4) remoteId=4@7818EC6DD00B: FindNodeByLLDPId and FindNodeByMAC failed, fallback to sysName (FW06")
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindRemoteNode(SW03 [36061]): remoteIdSubType=macAddress(4) remoteId=4: FindAccessPointByMAC failed, fallback to sysName ("FW06")
2026.05.21 16:40:51.475 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remote node not found
2026.05.21 16:40:51.475 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW05 [36103]
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=44
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=44 doRemoteLookup=false
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 44 not found in local LLDP port info cache
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=44
2026.05.21 16:40:51.475 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW05 [36103]
2026.05.21 16:40:51.537 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.537 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=36103 (node) ifRemote=25 ifLocal=0
2026.05.21 16:40:51.537 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW07 [35448]
2026.05.21 16:40:51.537 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=45
2026.05.21 16:40:51.537 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=45 doRemoteLookup=false
2026.05.21 16:40:51.537 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 45 not found in local LLDP port info cache
2026.05.21 16:40:51.537 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=45
2026.05.21 16:40:51.537 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW07 [35448]
2026.05.21 16:40:51.584 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.584 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=35448 (node) ifRemote=52 ifLocal=0
2026.05.21 16:40:51.584 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW09 [36232]
2026.05.21 16:40:51.584 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=46
2026.05.21 16:40:51.584 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=46 doRemoteLookup=false
2026.05.21 16:40:51.584 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 46 not found in local LLDP port info cache
2026.05.21 16:40:51.584 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=46
2026.05.21 16:40:51.584 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW09 [36232]
2026.05.21 16:40:51.615 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.615 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=36232 (node) ifRemote=52 ifLocal=0
2026.05.21 16:40:51.615 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW13 [35954]
2026.05.21 16:40:51.615 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=47
2026.05.21 16:40:51.615 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=47 doRemoteLookup=false
2026.05.21 16:40:51.615 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 47 not found in local LLDP port info cache
2026.05.21 16:40:51.615 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=47
2026.05.21 16:40:51.615 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW13 [35954]
2026.05.21 16:40:51.678 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.678 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=35954 (node) ifRemote=52 ifLocal=0
2026.05.21 16:40:51.678 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW15 [35836]
2026.05.21 16:40:51.678 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=48
2026.05.21 16:40:51.678 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=48 doRemoteLookup=false
2026.05.21 16:40:51.678 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 48 not found in local LLDP port info cache
2026.05.21 16:40:51.678 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=48
2026.05.21 16:40:51.678 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW15 [35836]
2026.05.21 16:40:51.819 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.819 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=35836 (node) ifRemote=52 ifLocal=0
2026.05.21 16:40:51.819 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW18 [35718]
2026.05.21 16:40:51.819 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=49
2026.05.21 16:40:51.819 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=49 doRemoteLookup=false
2026.05.21 16:40:51.819 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 49 not found in local LLDP port info cache
2026.05.21 16:40:51.819 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=49
2026.05.21 16:40:51.819 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW18 [35718]
2026.05.21 16:40:51.883 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.883 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=35718 (node) ifRemote=52 ifLocal=0
2026.05.21 16:40:51.883 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW04 [36019]
2026.05.21 16:40:51.883 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=50
2026.05.21 16:40:51.883 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=50 doRemoteLookup=false
2026.05.21 16:40:51.883 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 50 not found in local LLDP port info cache
2026.05.21 16:40:51.883 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=50
2026.05.21 16:40:51.883 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW04 [36019]
2026.05.21 16:40:51.930 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.930 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=36019 (node) ifRemote=21 ifLocal=0
2026.05.21 16:40:51.930 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): remoteNode=SW04 [36019]
2026.05.21 16:40:51.930 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is available, value=50
2026.05.21 16:40:51.930 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): localPort=50 doRemoteLookup=false
2026.05.21 16:40:51.930 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): port number 50 not found in local LLDP port info cache
2026.05.21 16:40:51.930 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): cannot find interface with dot1dBasePort=50
2026.05.21 16:40:51.930 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): lldpRemLocalPortNum is invalid, attempt to find matching information on remote node SW04 [36019]
2026.05.21 16:40:51.961 *D* [topology.lldp ] FindLocalInterfaceIndex(SW03 [36061], LLDP-MIB): ifLocal=0 after lookup on remote node
2026.05.21 16:40:51.961 *D* [topology.lldp ] ProcessLLDPConnectionEntry(SW03 [36061], LLDP-MIB): added connection: objectId=36019 (node) ifRemote=22 ifLocal=0
2026.05.21 16:40:51.961 *D* [topology.lldp ] Finished collecting LLDP topology information for node SW03 [36061]
2026.05.21 16:40:51.961 *D* [poll.topology ] Node::addHostConnections(SW03 [36061]): FDB retrieved
2026.05.21 16:40:51.961 *D* [topology.link ] BuildLinkLayerNeighborList(SW03 [36061]): 0 connections found
2026.05.21 16:40:51.961 *D* [poll.topology ] Link layer topology retrieved for node SW03 [36061] (0 connections found)
2026.05.21 16:40:51.961 *D* [poll.topology ] Link layer topology processed for node SW03 [36061]
2026.05.21 16:40:51.961 *D* [poll.topology ] Finished topology poll of node SW03 [36061]
2026.05.21 16:40:57.754 *D* [obj.sync ] Object SW03 [36061] modified with flags 00100000
#5
General Support / Re: Sending Alarms via webhook
November 09, 2023, 05:10:52 PM
Great, thank you, got it to work.
Really appreciate your helpful response.
Really appreciate your helpful response.
#6
General Support / Sending Alarms via webhook
November 08, 2023, 05:06:55 PM
Hello,
wondering what are the options to send alarms via webhook ?
Should I just call curl as a command on the management server?
Feel like doing it via scripts could provide more flexibility?
I have checked https://www.netxms.org/documentation/nxsl-latest/#class-webservice but I do not understand how that's supposed to work.
Grateful for nudging me in the right direction.
thank you
wondering what are the options to send alarms via webhook ?
Should I just call curl as a command on the management server?
Feel like doing it via scripts could provide more flexibility?
I have checked https://www.netxms.org/documentation/nxsl-latest/#class-webservice but I do not understand how that's supposed to work.
Grateful for nudging me in the right direction.
thank you
#7
General Support / Re: Script timeout after upgrade to 4.2
November 01, 2022, 04:02:59 PM
This did the trick, thank you! Great support as always. Will also look into this background mode as well.
#8
General Support / Script timeout after upgrade to 4.2
November 01, 2022, 12:54:57 PM
Hey,
I've just upgraded from 4.1 to 4.2 and noticed most of my scripts on agents are timing out after 5 seconds
Tried adding DefaultExecutionTimeout=30000 to the agent config, but seems to have no effect whatsoever. Have no other timeout values defined in the config. Cannot figure out what agent setting should I mess with.
Thank you!
I've just upgraded from 4.1 to 4.2 and noticed most of my scripts on agents are timing out after 5 seconds
Code Select
2022.11.01 11:36:17.798 *D* [comm.cs.1 ] H_ExternalTable called for "BackupList2" (separator=0x007C mode=S cmd="powershell -NoProfile C:\veeamscripts\Get-VeeamJobs-ExternalTable.ps1"
2022.11.01 11:36:17.798 *D* [exec ] RunExternal called for "BackupList2" "Spowershell -NoProfile C:\veeamscripts\Get-VeeamJobs-ExternalTable.ps1"
2022.11.01 11:36:17.798 *D* [exec ] RunExternal: command line is "powershell -NoProfile C:\veeamscripts\Get-VeeamJobs-ExternalTable.ps1"
2022.11.01 11:36:17.816 *D* [procexec ] ProcessExecutor::execute(): process "CMD.EXE /C powershell -NoProfile C:\veeamscripts\Get-VeeamJobs-ExternalTable.ps1" started
2022.11.01 11:36:22.816 *D* [exec ] RunExternal: external process execution timeout (command line "powershell -NoProfile C:\veeamscripts\Get-VeeamJobs-ExternalTable.ps1")
2022.11.01 11:36:22.823 *D* [procexec ] ProcessExecutor::readOutput(): process termination detectedTried adding DefaultExecutionTimeout=30000 to the agent config, but seems to have no effect whatsoever. Have no other timeout values defined in the config. Cannot figure out what agent setting should I mess with.
Thank you!
#9
General Support / Associated cluster resource and table DCI?
October 18, 2021, 09:56:51 AM
Hello,
whenever i try to associate a table DCI with a cluster resource the settings is not retained, i set the resource, apply-close the window, but when i check the setting the cluster resource is not associated, works OK with a simple DCI, but not table.
Are tables not supported?
whenever i try to associate a table DCI with a cluster resource the settings is not retained, i set the resource, apply-close the window, but when i check the setting the cluster resource is not associated, works OK with a simple DCI, but not table.
Are tables not supported?
#10
General Support / Re: Joining SNMP tables?
September 17, 2021, 10:49:55 AM
OK, what i did in the end:
I grabbed my Clients table and added a column for APName. If i added without OID it broke the table, returned no rows. So I had to include a valid OID as dummy.
In the transformation script i looked up my AP table for the names and replaced the values in this newly created column.
Works ok, though have the feeling there is a better way.
I grabbed my Clients table and added a column for APName. If i added without OID it broke the table, returned no rows. So I had to include a valid OID as dummy.
In the transformation script i looked up my AP table for the names and replaced the values in this newly created column.
Works ok, though have the feeling there is a better way.
#11
General Support / Joining SNMP tables?
September 17, 2021, 08:41:15 AM
Hello,
I've two SNMP tables one has info from Access points (AP MAC, AP Name), the other has info all the clients connected to the wireless. The latter only has the AP MAC not the name, would like to create a view/table where I can see the name of the AP the clients are connected to .
Can you recommend a good solution ?
thank you
I've two SNMP tables one has info from Access points (AP MAC, AP Name), the other has info all the clients connected to the wireless. The latter only has the AP MAC not the name, would like to create a view/table where I can see the name of the AP the clients are connected to .
Can you recommend a good solution ?
thank you
#12
General Support / Re: Displaying timestamp of DCI in dashboard
October 11, 2019, 09:38:45 AM
One more thing
Is it possible to somehow display the date/time on dashboard when stored as uint? Tried to play around with formatting string %tY for example, but all i get is invalid format.
Is it possible to somehow display the date/time on dashboard when stored as uint? Tried to play around with formatting string %tY for example, but all i get is invalid format.
#13
General Support / Re: Displaying timestamp of DCI in dashboard
October 10, 2019, 05:45:37 PM
Dear Filipp, thank you very much, think I can get this work now with, had a lack of understanding of the time functions but think I got it now.
#14
General Support / Displaying timestamp of DCI in dashboard
October 10, 2019, 01:51:33 PM
Hello,
I'm monitoring backups with a Push DCI through snmp traps. So the snmp trap fires an action script runs that pushes the result to the DCI.
Now I would like to visualize this by displaying the timestamp of the dci + result, but don't really know where should I start with this.
Currently I have a DCI that has the name of the backup job and stores the result.
What I would like to achieve is something like this:
Any guidance where and how to start is much appreciated.
I'm monitoring backups with a Push DCI through snmp traps. So the snmp trap fires an action script runs that pushes the result to the DCI.
Now I would like to visualize this by displaying the timestamp of the dci + result, but don't really know where should I start with this.
Currently I have a DCI that has the name of the backup job and stores the result.
What I would like to achieve is something like this:
| BackupJobName | | Last Backup Result datetime | | Last Backup Result |
Any guidance where and how to start is much appreciated.
Pages1