NetXMS Support Forum

Quote from: clifford on August 08, 2018, 08:40:18 AM

Quote from: clifford on August 07, 2018, 02:31:00 PM
Thanks,

i changed the values to 512, hope this helps..
however i could not find the ThreadPool.Syncer.MaxSize parameter in the server configuration., so i manually created one, when you say it should be greater than 1, what could be the recommended value based on the stats i posted.

netxmsd: show threads
MAIN
   Threads:            8 (8/512)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

POLLERS
   Threads:            509 (10/512)
   Load average:       51.59 54.84 62.20
   Current load:       8%
   Usage:              99%
   Active requests:    44
   Scheduled requests: 0

DATACOLL
   Threads:            250 (10/250)
   Load average:       4.68 4.33 2.69
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0


Thanks

Clifford

When everything is fine and the CPU is at 3% to 25 % Usage

netxmsd:  show threads
MAIN
   Threads:            36 (8/512)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              7%
   Active requests:    0
   Scheduled requests: 0

POLLERS
   Threads:            510 (10/512)
   Load average:       41.75 112.32 76.88
   Current load:       44%
   Usage:              99%
   Active requests:    226
   Scheduled requests: 0

DATACOLL
   Threads:            249 (10/250)
   Load average:       0.72 6.04 4.81
   Current load:       0%
   Usage:              99%
   Active requests:    2
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

SYNCER
   Threads:            10 (1/10)
   Load average:       17.84 29.54 14.71
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0


When things are bad



netxmsd: show threads
MAIN
   Threads:            2048 (8/2048)
   Load average:       2996493.60 2968151.86 2119779.01
   Current load:       145523%
   Usage:              100%
   Active requests:    2980327
   Scheduled requests: 0

POLLERS
   Threads:            1003 (10/1024)
   Load average:       51.45 48.24 45.01
   Current load:       5%
   Usage:              97%
   Active requests:    51
   Scheduled requests: 0

DATACOLL
   Threads:            512 (10/512)
   Load average:       5.44 2.90 1.57
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

SYNCER
   Threads:            7 (1/10)
   Load average:       0.00 1.44 5.04
   Current load:       0%
   Usage:              70%
   Active requests:    0
   Scheduled requests: 0

Quote from: clifford on August 07, 2018, 02:31:00 PM
Thanks,

i changed the values to 512, hope this helps..
however i could not find the ThreadPool.Syncer.MaxSize parameter in the server configuration., so i manually created one, when you say it should be greater than 1, what could be the recommended value based on the stats i posted.

netxmsd: show threads
MAIN
   Threads:            8 (8/512)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

POLLERS
   Threads:            509 (10/512)
   Load average:       51.59 54.84 62.20
   Current load:       8%
   Usage:              99%
   Active requests:    44
   Scheduled requests: 0

DATACOLL
   Threads:            250 (10/250)
   Load average:       4.68 4.33 2.69
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0


Thanks

Clifford

When everything is fine and the CPU is at 3% to 25 % Usage

netxmsd:  show threads
MAIN
   Threads:            36 (8/512)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              7%
   Active requests:    0
   Scheduled requests: 0

POLLERS
   Threads:            510 (10/512)
   Load average:       41.75 112.32 76.88
   Current load:       44%
   Usage:              99%
   Active requests:    226
   Scheduled requests: 0

DATACOLL
   Threads:            249 (10/250)
   Load average:       0.72 6.04 4.81
   Current load:       0%
   Usage:              99%
   Active requests:    2
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

SYNCER
   Threads:            10 (1/10)
   Load average:       17.84 29.54 14.71
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0


When things are bad



netxmsd: show threads
MAIN
   Threads:            2048 (8/2048)
   Load average:       2996493.60 2968151.86 2119779.01
   Current load:       145523%
   Usage:              100%
   Active requests:    2980327
   Scheduled requests: 0

POLLERS
   Threads:            1003 (10/1024)
   Load average:       51.45 48.24 45.01
   Current load:       5%
   Usage:              97%
   Active requests:    51
   Scheduled requests: 0

DATACOLL
   Threads:            512 (10/512)
   Load average:       5.44 2.90 1.57
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

SYNCER
   Threads:            7 (1/10)
   Load average:       0.00 1.44 5.04
   Current load:       0%
   Usage:              70%
   Active requests:    0
   Scheduled requests: 0

Thanks,

i changed the values to 512, hope this helps..
however i could not find the ThreadPool.Syncer.MaxSize parameter in the server configuration., so i manually created one, when you say it should be greater than 1, what could be the recommended value based on the stats i posted.

netxmsd: show threads
MAIN
   Threads:            8 (8/512)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

POLLERS
   Threads:            509 (10/512)
   Load average:       51.59 54.84 62.20
   Current load:       8%
   Usage:              99%
   Active requests:    44
   Scheduled requests: 0

DATACOLL
   Threads:            250 (10/250)
   Load average:       4.68 4.33 2.69
   Current load:       0%
   Usage:              100%
   Active requests:    0
   Scheduled requests: 0

SCHEDULER
   Threads:            1 (1/64)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0

AGENT
   Threads:            4 (4/256)
   Load average:       0.00 0.00 0.00
   Current load:       0%
   Usage:              1%
   Active requests:    0
   Scheduled requests: 0


Thanks

Clifford

Quote from: clifford on August 06, 2018, 06:56:59 AM
Hi

I just upgraded to 2.2.7  and the CPU usage is constantly high, and NetXMS is terribly slow. when i select alarns i get a requet timed out message (attached)
-----------------------------------------------------------------------------------
[root@localhost ~]# nxdbmgr -v
NetXMS Database Manager Version 2.2.7 Build 9513 (2.2.7) (UNICODE)
-----------------------------------------------------------------------------------
netxmsd: show dbstats
SQL query counters:
   Total .......... 8677913
   SELECT ......... 324464
   Non-SELECT ..... 8353449
   Long running ... 0
   Failed ......... 0
Background writer requests:
   DCI data ....... 57904
   DCI raw data ... 57903
   Others ......... 59
---------------------------------------------------------------------------------------
netxmsd: show queues
Data collector                   : 0
DCI cache loader                 : 0
Template updates                 : 0
Database writer                  : 0
Database writer (IData)          : 0
Database writer (raw DCI values) : 1808
Event processor                  : 0
Event log writer                 : 0
Poller                           : 0
Node discovery poller            : 0
Syslog processing                : 0
Syslog writer                    : 0
Scheduler                        : 0
------------------------------------------------------------
netxmsd: show stats
Objects............ 34904
Monitored nodes.... 1113
Collectible DCIs... 2191
Active alarms...... 168
__________________________________
netxmsd: show stats

Todays show stats

Objects............ 34955
Monitored nodes.... 1115
Collectible DCIs... 2191
Active alarms...... 218


what may be causing this, please help

Regards

Clifford Dsouza

Can NetXMS use multi core CPU, ?

Hi

I just upgraded to 2.2.7  and the CPU usage is constantly high, and NetXMS is terribly slow. when i select alarns i get a requet timed out message (attached)
-----------------------------------------------------------------------------------
[root@localhost ~]# nxdbmgr -v
NetXMS Database Manager Version 2.2.7 Build 9513 (2.2.7) (UNICODE)
-----------------------------------------------------------------------------------
netxmsd: show dbstats
SQL query counters:
   Total .......... 8677913
   SELECT ......... 324464
   Non-SELECT ..... 8353449
   Long running ... 0
   Failed ......... 0
Background writer requests:
   DCI data ....... 57904
   DCI raw data ... 57903
   Others ......... 59
---------------------------------------------------------------------------------------
netxmsd: show queues
Data collector                   : 0
DCI cache loader                 : 0
Template updates                 : 0
Database writer                  : 0
Database writer (IData)          : 0
Database writer (raw DCI values) : 1808
Event processor                  : 0
Event log writer                 : 0
Poller                           : 0
Node discovery poller            : 0
Syslog processing                : 0
Syslog writer                    : 0
Scheduler                        : 0
------------------------------------------------------------
netxmsd: show stats
Objects............ 34904
Monitored nodes.... 1113
Collectible DCIs... 2191
Active alarms...... 168
__________________________________
netxmsd: show stats

Todays show stats

Objects............ 34955
Monitored nodes.... 1115
Collectible DCIs... 2191
Active alarms...... 218


what may be causing this, please help

Regards

Clifford Dsouza

Hi

can we change the default switch icon

Regards

Clifford Dsouza

Hi lindeamon

(auto bind them to a container) i need help with the steps to get this done,

snmpwalk -v2c 192.168.x.x -c public 1.3.6.1.4.1.259.10.1.43.1.1.3.1.10.1 (this query fetches me the serial number)

Regards

Clifford Dsouza

HI

is it possible to get an inventory of all my switched and routers

i actually need the serial number of the switches and also the serial numbers of the the SFP modules installed in the switches

Regards

Clifford Dsouza

Hi

I have created 2 links between 2 objects, using bend points, however when i double click on the link to view my graphs additional bend points are created, is there a way to avoid this?

Regards

Clifford Dsouza

Hi, victor

Will this be added in the future releases?

Regards

Clifford Dsouza

HI Tatjana

the interfaces to the switch are down as seen in the screenshot, am also not able to ping the device, our on site also confirms that there is no power to the device, and yet is shows as up, manual poll to the device also shows as not reachable, and yet the status shows as up on the map,

well... its not a big issue as we can see the cut on both sides to the device, its just that the representation on the map is not accurate

regards

Clifford Dsouza

Hi

some object (Node) status is not updated on in NetXMS, the node status shows as up even though the node is not reachable

have restarted the service, but the issue remains

is there something i need to do

Regards

Clifford Dsouza

Hi

How do i know the total number of nodes created in NetXMS

just like in the attachment

Thanks

Clifford Dsouza

Hi Ericks

Noted!. Thanks for taking the time to help me

Regards
Clifford Dsouza

Hi Ericks

actually i figured that out, however i need a group of users the ability to add/modify objects, but without the ability to change the layout. Possible?
Cause i painstakingly created a manual MAP and a user accidentally changed layout options

Regards
Clifford Dsouza